Download MP 277 - Service, Support

Configuring the device
6.7 Setting the Delay Time
You have opened the "Directories" tab in the "Transfer Settings" dialog box with the
"Transfer" icon.
Directory where the project file is saved
Directory where the compressed source file of your project is saved
The external memory card or the network connection can be defined as the storage location.
During the next backup process, the project's source file is stored in the specified location.
Storage location and initialization file of the HMI device for process operation
Region selection box
Settings in "Project File" and "Path"
The project may not open at the next start of the HMI device if changes are made here.
Do not change the setting in the "Project File" and "Path" fields.
1. Select the desired delay time in seconds in the "Wait [sec]" selection box.
With the value "0", the project starts immediately. It is then no longer possible to call the
Loader after switching on the HMI device. If you still wish to access the Loader, an
operating element must be configured to close the project.
2. Confirm your entries.
The dialog box closes.
The delay time for the HMI device is now set.
MP 277
Operating Instructions, 07/2014, A5E02479740-02