MP 277 - Service, Support Download

Transcript
Configuring the device
6.6 Changing HMI device settings
6.6.9
Displaying Information about the HMI Device
You will need the device-specific information when you contact Technical Support.
Requirement
You have opened the "Device" tab in the "OP Properties" dialog box with the "OP" icon.
The figure below shows the dialog using MP 277 8" Touch as an example.
①
②
③
④
⑤
⑥
⑦
HMI device name
Version of the HMI device image
Version of the boot loader
Boot loader release date
Size of the internal flash memory in which the HMI device image and project are stored
MAC address of the HMI device
Button for restarting the HMI device
Procedure
1. The device-specific information is displayed in the "Device" tab.
2. Close the dialog when the information is no longer required.
Note
The size of the internal flash memory does not correspond to the available working
memory for a project.
MP 277
100
Operating Instructions, 07/2014, A5E02479740-02