MP 277 - Service, Support Download

Transcript
Configuring the device
6.9 State of uninterruptible power supply
6.9
State of uninterruptible power supply
If you have connected a UPS to a USB port, you can display the monitoring state of this port.
Requirement
You have opened the "Current status" tab in the "UPS Properties" dialog using the
"UPS" icon.
①
②
The "UPS program is not running. No current status available." message appears when the
UPS is not connected.
Update
Procedure
1. Installing the UPS monitoring software.
2. Connect the UPS.
3. If you want to update the monitoring state, press the "Update" button.
The message is changed according to the current setting. The message will remain
unchanged if no check boxes in the "Configuration" tab have been activated.
The current monitoring state for the UPS is displayed.
MP 277
Operating Instructions, 07/2014, A5E02479740-02
105