MP 277 - Service, Support Download

Transcript
Configuring the device
6.11 Configuring network operation
5. Enter the respective addresses in the text boxes.
6. Change to the "Ethernet Parameters" tab.
①
②
Selection list with entries for transfer type and transfer speed
Refers to network topology
You can find information on the MP 277 in the online help of the TIA Portal.
7. In the "Mode and Speed" selection list, select the transfer type and the transfer speed.
Take the transfer type and transfer speed of the connected devices in the network into
consideration when you make your selection.
8. Confirm your entries.
The dialog box closes.
9. Close the "Network&Dial-Up Connections" view.
The Control Panel is displayed again.
The LAN connection parameters for the HMI device have been changed.
See also
Overview of network operation (Page 113)
MP 277
Operating Instructions, 07/2014, A5E02479740-02
117