MP 277 - Service, Support Download

Transcript
Configuring the device
6.11 Configuring network operation
6.11.5
Changing E-Mail Settings
Requirement
You have opened the "WinCC Internet Settings" dialog box with the
"WinCC Internet Settings" icon.
①
②
③
④
Setting the SMTP server
Name for the sender
E-mail account
Button for the "Advanced" dialog
Note
Additional tabs may appear in the "WinCC Internet Settings" tab. This depends on the options
that have been enabled for network operation in the project.
Procedure
1. Specify the SMTP server.
– Select the "Use the default of the project file" option button if you want to use the
SMTP server configured in the project.
– Deactivate the "Use the default of the project file" option button if you do not want to
use the SMTP server configured in the project.
– Specify the required SMTP server.
2. Enter the name for the sender in the "Name of sender" text box.
3. Enter the e-mail account for your e-mail in the "E-mail address of sender" text box.
Some e-mail providers only allow you to send mail if you specify the e-mail account. The
"E-mail address of sender" text box can remain empty if your e-mail provider allows you
to send mail without checking the account.
MP 277
Operating Instructions, 07/2014, A5E02479740-02
119