MP 277 - Service, Support Download

Transcript
Configuring the device
6.13 Restoring data from external storage device
5. The data to be restored is checked.
The following messages are displayed in sequence in the "Restore" dialog:
– Starting Restore
– Checking data
When the data has been checked, the following message is displayed:
"You are starting RESTORE now. All files (except files on storage cards) and the registry
will be erased. Are you sure?"
The message means that the restore process can be started. All files files except those
located on the external memory will be deleted. Tab entries are also deleted. Are you
sure?
6. If you do not want to allow the data to be deleted from the HMI device, abort the restore
process by pressing the "No" button.
7. Start to restore the data by selecting "Yes".
The following messages are displayed in sequence during the restore:
– Deleting files on flash
– Restore CE-Image
A progress bar shows the status of the restore process.
When restore is completed, the following message is displayed:
"Restore of CE Image finished. The device will be rebooted now. Don't remove the
storage card."
8. Acknowledge this message.
The HMI device reboots.
The "Restore" dialog box is displayed after booting. Finally, the following message is
displayed:
"Restore successfully finished. Press ok, remove your storage card and reboot your
device."
9. Remove the storage device with the data backup.
10. Restart the HMI device.
The data from the external storage device is now on the HMI device.
Note
You may have to recalibrate the touch screen after the restore operation.
MP 277
130
Operating Instructions, 07/2014, A5E02479740-02
Similar
MP 277 - Service, Support
MP 277 - Service, Support
WirelessKey PROFESSIONAL manual
WirelessKey PROFESSIONAL manual
Descarga  - Service, Support
Descarga - Service, Support
X5 line c - Ascon S.p.A.
X5 line c - Ascon S.p.A.
"user manual"
Visualization of Dispatching Strategies
Visualization of Dispatching Strategies
TP 277, OP 277 (WinCC flexible) - Service, Support
TP 277, OP 277 (WinCC flexible) - Service, Support
Operating Instructions HMI device MP 177 (WinCC flexible)
Operating Instructions HMI device MP 177 (WinCC flexible)
Catalog ST 80 / ST PC 2010
Catalog ST 80 / ST PC 2010
SIMATIC HMI HMI Device TP 177A, TP 177B, OP
SIMATIC HMI HMI Device TP 177A, TP 177B, OP
900 kB - Nexus Marine
900 kB - Nexus Marine
- Murdoch Research Repository
- Murdoch Research Repository
X1 line c
X1 line c
"user manual"
WinAC RTX ODK User Manual - Service, Support
WinAC RTX ODK User Manual - Service, Support
RPX Lite (RPXL_CW), User Manual
RPX Lite (RPXL_CW), User Manual
Simatic S7-200
Simatic S7-200
SIMATIC HMI HMI device MP 377 (WinCC flexible)
SIMATIC HMI HMI device MP 377 (WinCC flexible)
Operator Control and Monitoring Devices
Operator Control and Monitoring Devices
NETLink PRO Compact Handbuch
NETLink PRO Compact Handbuch
Mobile Panel 277 RO - Service, Support
Mobile Panel 277 RO - Service, Support
KT4H Temperature Controller
KT4H Temperature Controller