MP 277 - Service, Support Download

Transcript
Safety instructions and approvals
2.2 Standards, certificates and approvals
UL approval
Underwriters Laboratories Inc., conforming to
● UL 508 (Industrial Control Equipment)
● CSA C22.2 No. 142 (Process Control Equipment)
or
Underwriters Laboratories Inc., conforming to
● UL 508 (Industrial Control Equipment)
● CSA C22.2 No. 142 (Process Control Equipment)
● ANSI/ISA 12.12.01 (Hazardous Location)
● CSA-213 (Hazardous Location)
Approved for use in
● Class I, Division 2, Group A, B, C, D or
● Class I, Zone 2, Group IIC or
● non-hazardous locations
FM approval
Factory Mutual Research (FM) conforming to
● Approval Standard Class Number 3611, 3600, 3810
Approved for use in
● Class I, Division 2, Group A, B, C, D T4
● Class I, Zone 2, Group IIC T4
Marking for Australia
The HMI device fulfills the requirements of standard AS/NZS CISPR 16 (Class A).
IEC 61131
The HMI device satisfies the requirements and criteria conforming to IEC 61131-2,
Programmable Logic Controllers, Part 2: Operating resource requirements and tests.
MP 277
Operating Instructions, 07/2014, A5E02479740-02
29