MP 277 - Service, Support Download

Transcript
Installing and connecting the device
4.3 Connecting the HMI device
Positions of the mounting clips on the MP 277 10" Key
You will need 10 mounting clips in total. The following figure shows the positions of the
mounting clips.
4.3
Connecting the HMI device
4.3.1
Overview
Requirement
● The HMI device must be mounted according to the specifications of these operating
instructions.
● Always use shielded standard cables.
Additional information is available in the catalog and online order system at Industry Mall
(https://mall.industry.siemens.com).
MP 277
44
Operating Instructions, 07/2014, A5E02479740-02