MP 277 - Service, Support Download

Transcript
Configuring the device
6.1 Loader
● Press the "Control Panel" button to open the Control Panel of the HMI device.
You can change various settings in the Control Panel, for example, the transfer settings.
● Press the "Taskbar" button to activate the taskbar with opened Windows CE Start menu:
①
②
"Taskbar" button in the loader
Windows CE Start menu
Open loader
The following options are available to open the loader:
● The loader appears briefly after starting the HMI device.
● The loader appears when the project is closed.
If configured, use the relevant operating element to close the project.
Refer to your plant documentation to find any available additional information on this
topic.
MP 277
70
Operating Instructions, 07/2014, A5E02479740-02