MP 277 - Service, Support Download

Transcript
Configuring the device
6.3 Control Panel
Symbol
Function
Changing Regional Settings (Page 92)
•
Number format
•
Currency
•
Time format
•
Date format
Changing S7 transfer settings (Page 106)
Setting the screen saver (Page 94)
•
Screen saver
•
Reducing screen backlighting
Displaying System Properties (Page 101)
Setting the device name of the HMI device (Page 115)
Configuring the data channel (Page 109)
Setting the Delay Time (Page 102)
Setting the uninterruptible power supply (Page 104)
State of uninterruptible power supply (Page 105)
Set the volume (Page 97)
Changing E-Mail Settings (Page 119) 2
1
2
For MP 277 Touch only
Additional tabs may appear in the "WinCC Internet Settings" dialog. This depends on the options
that have been enabled for network operation in the project.
6.3.3
Operating the Control Panel
6.3.3.1
Overview
The hardware of the HMI device determines which of the following devices are available:
● Touch screen
The operating elements shown in the dialogs are touch-sensitive. Touch objects are
basically operated in the same way as mechanical keys. You activate operating elements
by touching them with your finger. To double-click them, touch an operating element
twice in succession.
● HMI device keyboard
The operating elements shown in the dialogs are selected and operated using the keys of
the HMI device.
MP 277
Operating Instructions, 07/2014, A5E02479740-02
77