MP 277 - Service, Support Download

Transcript
Configuring the device
6.6 Changing HMI device settings
3. Select either the standard screen saver or an empty screen.
– In order to select the standard screen saver, activate the "Standard" option.
– In order to select an empty screen as screen saver, activate the "Blank Screen"
option.
4. Confirm your entries.
The dialog box closes.
The screen saver and the reduced backlighting for the HMI device is set.
6.6.6
Changing the Printer Properties
HMI devices can print on local printers or network printers. You can print hardcopy and logs
on network printers. Line printing of alarms is not possible on a network printer.
You can find the list of current printers and required settings for HMI devices on the Internet
at Printers approved for SIMATIC Panels and Multi Panels
(http://support.automation.siemens.com/WW/view/en/11376409).
Requirement
You have opened the "Printer Properties" dialog box with the "Printer" icon.
①
②
③
④
⑤
⑥
Printer selection box
Interface
Network address of the printer
Paper size selection box
Orientation setting
Print quality setting
MP 277
96
Operating Instructions, 07/2014, A5E02479740-02