MP 277 - Service, Support Download

Transcript
Configuring the device
6.6 Changing HMI device settings
Procedure
1. Select the printer in the "Printer Language" selection box.
2. Select the port for the printer in the "Port" selection box.
3. If you wish to print via the network, enter "Network:" in the text box the network address
of the printer.
4. Select the paper format in the "Paper Size" selection box.
5. Select the required option button in the "Orientation" group:
– "Portrait" for vertical format
– "Landscape" for horizontal format
6. Select the print quality.
– Select the "Draft Mode" check box if you want to print a draft.
– Clear the "Draft Mode" check box if you want to print with higher quality.
7. Set the color mode.
– Select the check box "Color" if you wish to print in color.
8. Confirm your entries.
The dialog box closes.
The settings for the printer have now been changed.
6.6.7
Set the volume
You can activate an acoustic feedback for keyboard and touch screen operations. With each
touch or activation of a key, an acoustic signal is emitted.
Requirement
You have opened the "Volume & Sounds Properties" dialog box with the
"Volume & Sounds" icon.
①
②
③
Check boxes and radio buttons for acoustic feedback when using the keyboard
Check boxes and radio buttons for acoustic feedback when using the touch screen
Buttons for adjusting the volume
MP 277
Operating Instructions, 07/2014, A5E02479740-02
97