Download SierraNet M408 User Manual

Transcript
Teledyne LeCroy
Advanced Mode (User‐Defined)
Copy/Cut and Paste Conditions
You can copy and paste Conditions within and between States.
1. Right‐click in the empty yellow space of the Condition you want to copy and select Copy Condition (or Cut Condition if applicable).
2. Right‐click in the gray placeholder area (i.e. in the area that says "Drag an event here....") of the desired target State and select Paste.
Copy/Cut and Paste Events
You can copy and paste Events within and between States.
1. Right‐click on the Event you want to copy and select Copy (or Cut if applicable).
2. Right‐click in the empty yellow space of the desired target Condition or in the gray placeholder area (i.e. in the area that says "Drag an event here....") of the desired target State and select Paste.
Adding Patterns to a State
1. Drag a pattern from the list of patterns displayed in the left panel and drop it in the State to add it. The application displays Drag an event or Drag an event here to add another condition, to indicate the location to drop events in a State. Drag/Drop events between states will copy/paste the event.
2. Define each selected pattern in the same way as in Easy Mode, as described in “Triggering/Filtering Patterns (Easy Mode)” on page 71. To use a timer, define it first.
Note: You can copy a frame from the spreadsheet view and paste it for triggering.
Note: You can set a timer for any If or Else If condition.
3. Enter a value for the number of occurrences before trigger in the Count field, up to a maximum of 65535 occurrences.
Setting Triggers
The trigger icon toggles between a blue outline and no outline, activating and deactivating it. Click the Trigger icon to activate the trigger. Once the trigger is activated the no outline trigger icon turns to blue outline. External Output Trigger
The external output trigger icon toggles between a blue outline and no outline, activating and deactivating it. The External Output Trigger icon (no outline) indicates there is no change. Click to activate the trigger. Once the trigger is activated the icon has a blue outline 106 SierraNet M408 User Manual
indicating it is active.