Download SierraNet M408 User Manual

Transcript
Batch Scenario Overview
Teledyne LeCroy
Figure 5.17: Destination Address field selected.
A batch scenario such as this can run a jammer scenario with a frame event. An example is shown in Figure 5.18. Figure 5.18: Destination Address before changes.
As you see, the “Destination Address” field is 0xXXXXXXXX XXXX. After starting the batch scenario, the expected behavior is the “Destination Address” field is replaced with the value 0x1122334455 from the defined global variable.
If you check the same jammer frame event after running the batch, the result will be as seen in Figure 5.19, which is the expected behavior.
SierraNet M408 Protocol Analyzer User Manual
231