Download SierraNet M408 User Manual

Transcript
Teledyne LeCroy
Trigger Filter Settings in Easy Mode
ISCSI Cmd
Any SCSI Command
Double‐click 6‐Byte Any SCSI Cmd to open the dialog. Figure 2.65: 6-Byte Any SCSI Cmd Dialog
Enter the values for the Ether header, IP Header and the count of the expected number of occurrences. Check the Check All box to select ports P1 through P8 or individually select ports.
Other ISCSI patterns available are:
10‐Byte Any SCSI Cmd
12‐Byte Any SCSI Cmd
 16‐Byte Any SCSI Cmd
 Long LBA16‐Byte Any SCSI Cmd
 Variable Length Any SCSI Cmd
 Variable Length For Long LBA 32‐Byte Any SCSI Cmd
SPC4
SBC3
MMC6
SMC2
SSC2
OSD2
ADC3









iWARP Patterns
You may set patterns for the following iWARP RDMA operations:
86 SierraNet M408 User Manual