User`s Manual Download

Transcript
ICS-4040 Series User’s Manual
4.1.3 Port Configuration
4.1.3.1 Port Control
By this function, you can set the state, speed/duplex, flow control, and security of the
port.
Port Control interface
The following table describes the labels in this screen.
Label
Description
Port NO.
Port number for setting.
State
Enable/Disable the port.
Speed/Duplex
You can set Auto-negotiation, 100 full,100 half,10 full,10
half mode.
Flow Control
Support symmetric and asymmetric mode to avoid packet
loss when congestion occurred.
Apply
ORing Industrial Networking Corp.
Click “Apply” to set the configurations.
15
Similar
Industrial Lite-Managed PCI Ethernet Switch Card
Industrial Lite-Managed PCI Ethernet Switch Card
User Manual_IES-2050-M12
User Manual_IES-2050-M12
Manual - NEXTLAN
Manual - NEXTLAN
Industrial P.O.E. Lite-Managed Ethernet Switch
Industrial P.O.E. Lite-Managed Ethernet Switch
IAP-6002-WG User`s Manual
IAP-6002-WG User`s Manual
Industrial Management Ethernet Switch
Industrial Management Ethernet Switch
User`s Manual
User`s Manual
User`s Manual
User`s Manual
Manual
Manual
Industrial POE Lite-Managed Ethernet Switch IPS
Industrial POE Lite-Managed Ethernet Switch IPS
User`s Manual
User`s Manual
IAR-7002-WG User`s Manual
IAR-7002-WG User`s Manual
User`s Manual
User`s Manual
User`s Manual
User`s Manual
User`s Manual
User`s Manual
Industrial Device Server User`s Manual IDS-5011F Series
Industrial Device Server User`s Manual IDS-5011F Series
IAR-7002-WG User`s Manual
IAR-7002-WG User`s Manual
User`s Manual
User`s Manual
NAVMAN
NAVMAN
NI WSN-3202 User Guide and Specifications
NI WSN-3202 User Guide and Specifications
PZM30 D
PZM30 D
Réindustrialisation Bretagne
Réindustrialisation Bretagne