User`s Manual Download

Transcript
ICS-4040 Series User’s Manual
4.1.10 LLDP
LLDP (Link Layer Discovery Protocol) function allows the switch to advertise its
information to other nodes on the network and store the information it discovers.
The following table describes the labels in this screen.
Label
Description
LLDP Protocol
“Enable” or “Disable” LLDP function.
LLDP Interval
The interval of resend LLDP (by default at 30 seconds)
Apply
Click “Apply” to set the configurations.
Help
Show help file.
Technical Specifications
Technology
PCI specification
Wake On LAN
Ring redundancy
Driver Support
ORing Industrial Networking Corp.
Meets PCI Local Bus specification, Rev 2.2
PCI 32-bit Bus Master architecture
Supports Wake On LAN (WOL) through PCI bus
„
RSTP
„
O-Ring
„
Couple Ring
„
Dual Homing
„
Fast recovery mode
„
Microsoft WFW 3.11, Windows
30
Similar
Industrial Lite-Managed PCI Ethernet Switch Card
Industrial Lite-Managed PCI Ethernet Switch Card
User Manual_IES-2050-M12
User Manual_IES-2050-M12
Manual - NEXTLAN
Manual - NEXTLAN
Industrial P.O.E. Lite-Managed Ethernet Switch
Industrial P.O.E. Lite-Managed Ethernet Switch
IAP-6002-WG User`s Manual
IAP-6002-WG User`s Manual
Industrial Management Ethernet Switch
Industrial Management Ethernet Switch
User`s Manual
User`s Manual
User`s Manual
User`s Manual
Manual
Manual
Industrial POE Lite-Managed Ethernet Switch IPS
Industrial POE Lite-Managed Ethernet Switch IPS
User`s Manual
User`s Manual
IAR-7002-WG User`s Manual
IAR-7002-WG User`s Manual
User`s Manual
User`s Manual
User`s Manual
User`s Manual
User`s Manual
User`s Manual
Industrial Device Server User`s Manual IDS-5011F Series
Industrial Device Server User`s Manual IDS-5011F Series
IAR-7002-WG User`s Manual
IAR-7002-WG User`s Manual
User`s Manual
User`s Manual
NAVMAN
NAVMAN
NI WSN-3202 User Guide and Specifications
NI WSN-3202 User Guide and Specifications
PZM30 D
PZM30 D
Réindustrialisation Bretagne
Réindustrialisation Bretagne