User`s Manual Download

Transcript
ICS-4040 Series User’s Manual
Cables
3.1
Ethernet Cables
The ICS-4040 has standard Ethernet ports. According to the link type, the switches use
CAT 3, 4, 5,5e UTP cables to connect to any other network device (PCs, servers, switches,
routers, or hubs). Please refer to the following table for cable specifications.
Cable Types and Specifications
Cable
Type
10BASE-T
Cat. 3, 4, 5
100BASE-TX
Cat. 5 100-ohm UTP
3.1.1
100-ohm
Max. Length
Connector
UTP 100 m (328 ft)
RJ-45
UTP 100 m (328 ft)
RJ-45
100BASE-TX/10BASE-T Pin Assignments
With 100BASE-TX/10BASE-T cable, pins 1 and 2 are used for transmitting data, and
pins 3 and 6 are used for receiving data.
RJ-45 Pin Assignments
Pin Number
Assignment
1
TD+
2
TD-
3
RD+
4
Not used
5
Not used
6
RD-
7
Not used
8
Not used
ORing Industrial Networking Corp.
4
Similar
Industrial Lite-Managed PCI Ethernet Switch Card
Industrial Lite-Managed PCI Ethernet Switch Card
User Manual_IES-2050-M12
User Manual_IES-2050-M12
Manual - NEXTLAN
Manual - NEXTLAN
Industrial P.O.E. Lite-Managed Ethernet Switch
Industrial P.O.E. Lite-Managed Ethernet Switch
IAP-6002-WG User`s Manual
IAP-6002-WG User`s Manual
Industrial Management Ethernet Switch
Industrial Management Ethernet Switch
User`s Manual
User`s Manual
User`s Manual
User`s Manual
Manual
Manual
Industrial POE Lite-Managed Ethernet Switch IPS
Industrial POE Lite-Managed Ethernet Switch IPS
User`s Manual
User`s Manual
IAR-7002-WG User`s Manual
IAR-7002-WG User`s Manual
User`s Manual
User`s Manual
User`s Manual
User`s Manual
User`s Manual
User`s Manual
Industrial Device Server User`s Manual IDS-5011F Series
Industrial Device Server User`s Manual IDS-5011F Series
IAR-7002-WG User`s Manual
IAR-7002-WG User`s Manual
User`s Manual
User`s Manual
NAVMAN
NAVMAN
NI WSN-3202 User Guide and Specifications
NI WSN-3202 User Guide and Specifications
PZM30 D
PZM30 D
Réindustrialisation Bretagne
Réindustrialisation Bretagne