Download Let`s get started >

NP740n – Quick Install Guide
Let’s get started >
1 Set your Broadband Modem into Bridge Mode
Note: Refer to your Broadband Modem User Manual for instructions.
2 Connecting your Router
• Power off all your devices
• Using your Ethernet cable,
connect your Broadband Modem
to the WAN port found at the
back of the Router.
Internet
Internet
Internet
• Connect your PC to any LAN port
(1,2,3,4)
ADSL or Cable Modem
Internet
ADSL or Cable Modem
Internet
ADSL or Cable Modem
ADSL or Ca
Desktop
ADSL or Cable Modem
ADSL or Cable Modem
Desktop Computer
Desktop Computer
• Connect the power cable (12VDC)
• Power on the PC, Modem and
Router
Internet
Internet
ADSL or
Desk
Power Adapter
ADSL or Cable Modem
ADSL or Cable Modem
Desktop Computer
Power Adapter
Desktop Computer
Power Adapter
NP740n – Quick Install Guide
3 Open up your web browser and type into the
address field:
192.168.1.1/wanpppoe.asp
4 Enter the following details
User name:
admin
Password:
admin (lower case)
Then click OK
Setup option 2
If you are unable to set your Broadband Modem to Bridge
Mode or do not need to network multiple devices, follow
the steps below:
1 Connect your Router – refer to the step 2 on the
previous page
5 Enter your Internet Service Provider (ISP’s) User
Name and Password into the fields as shown below. 2 Open up your web browser and type into the
address field:
The Service Name can be left blank. Click Apply
192.168.1.1/lan.asp
with the default settings.
3 Enter the following details
User name:
admin
Password:
admin (lower case)
Then click OK
4 Enter the following numbers into the fields listed
below:
IP Address:
192.168.3.1
Start IP:
192.168.3.2
6 The following page will appear. Click Apply
End IP:
192.168.3.254
5 Click on Apply/Submit or press OK
7 See below for instructions on how to establish a
wireless connection.
Establish a Wireless Connection
You can connect multiple wireless devices including laptops, desktops and PDA’s to your 11n
Wireless Router by following the 2 basic steps:
1 Using your wireless device, scan the wireless networks in your area and select the network
called wireless. Then click Connect.
2 Enter the following security key: a1b2c3d4e5