Download Wireless Forehead Thermometer User`s Manual

Transcript
Wireless Forehead Thermometer
Model: TTS-2
User’s Manual
Check the following items before use
①.
②.
③.
④.
⑤.
Wireless Forehead Thermometer Device 1 PCS.
CR1220 Coin Battery 2 PCS.
Double Coated Medical Tape 1 Set.
Battery tray‘s hook 1 PCS
User’s Manual
Ready to Use
1.
Press TTS-2’s button 3 sec to turn on the product power.
2.
Stick the double-coated Medical Tape on the product back side, and
stick on patient’s forehead.
3.
Product Description
Back Side
Front Side
Specifications
Press the
“YOFA Healthcare” icon to start the APP.

Please refer the detail function on the “YOFA Healthcare”.

When start the APP first time, please select or create a user account.

The Cellar phone/Pad connect one device in the same time.
Temperature
Sensor
User’s Guide
The product is for continue monitoring forehead temperature purpose. Before
use, please read the user’s manual carefully. (Attention: Product housing is
only for reference. )
1.
Replace Battery
①
Insert the hook.
③
②
Rotate 90 degree to hook
the battery tray.
⑤
Check the Positive and Negative Pole.
2.
Insert the Tray into the device.
Download Software APPs
Scanning the QR code or searching the “YoFa” on the Apple App Store or
Android Google Play download the APP.
iOS System
 Support the iOS 7 and above, and
with Bluetooth 4.0 Device.
30℃~45℃ (86℉~113℉)
Sight of length to 10 ~ 20 meters.
Mute:Press the button during the standby mode.
Power Off:Press button 3 sec to turn off the device.
Android System
 Support the Android 4.3 and above,
and with Bluetooth 4.0 Device.
Buzzer Specification
Battery Low:Long beeps every 10 sec.
Memory Insufficient:Long beeps every 10 sec.

This product contains precision motherboard, avoid any undue bending and impact and
other damage.
Power Off:Beeps 3 times then shutdown.

Do not use this product should be kept in harsh environments (less than 5 ℃ / 41 ℉ to
or higher than 55 ℃ / 131 ℉, humidity is higher than 95% RH), avoiding damage to
the body caused by the product, moisture, and affect their accuracy.
During Connection:Red and Green flash.

Do not place the product in children are readily available place to avoid eating or
playing damage.

This product is for daily use to detect body temperature, can not be a substitute for
professional medical diagnosis, in time other uses does not guarantee its effectiveness.

This product adapt to indoor use, avoiding direct sunlight or hot air outlet measured.

If not within the specified operating temperature and humidity range, there is no
guarantee the accuracy of volume measurement.

Subjects were at rest, please use this product, when used in patients with adhesive on
the forehead, before affixing your forehead properly cleaned and dry surface.

When replacing self-sided adhesive, please buy hypoallergenic medical grade product,
affixing to avoid prolonged skin caused by allergies and other adverse reactions.

If you remove the battery when not in use for a long time and placed in the storage box
saved, used battery, please recycle at suitable locations in accordance with each country
or local legislation, do not be thrown away.
Pull out the tray.
④
10 sec. (default setting)
Alarm:Long beep every 1 sec.
Buzzer
LED (Red/Green)
Descriptions
TTS-2
Power On:Press button 3 sec to turn on device.
Button Specification
Battery Tray
Notice
Button
Items
Model
Display Temperature
Period
Detect Temperature
Range
Cover Range

During the warranty period as a result of improper use when the man, disassemble or
unavoidable natural disasters as a result of damage to the product, it is not included in
the scope of protection.

After the warranty period are subject to failure, depending on the case charge a
maintenance cost.

If there is any defect in this product must be specified by the manufacturer, agent or
distributor responsible for maintenance.
Power On:Red and Green Flash 2 times.
Connecting:Green flash per 10 sec.
LED Specification
Alarm:Continue Red flash.
Battery Low:Red flash 2 times per 10 sec.
Memory Insufficient:Red flash 2 times per 10 sec.
Power Off:Red flash 2 times.
Temperature
Accuracy
(meet CNS15043)
Precision
Operating
Temperature
Dimension
Weight
± 0.2℃, 35.8℃~37℃ (±0.3℉, 96.4℉~98.0℉)
± 0.1℃, 37 ℃~39℃ (±0.2℉, 98.0℉~102.0℉)
± 0.2℃, 39 ℃~41℃ (±0.3℉, 102.0℉~106.0℉)
0.01℃/℉
5℃~55℃(41℉~131℉)
Φ40mm* 6mm
6g (without battery)
CR1220 40mAh
Battery
3V Coin Battery
Up to 120 hours (every 10 minutes refresh the
temperature.)
Warranty
1 Year.
※YoFa has authoring without notice to user if any contents changed.
Warranty
YOFA provides product (exclude the accessory) warranty for one year. If the
product doesn’t work property, please check the sale chain store or contact
the service agency.