Download iStick 20W Battery

iStick
User Manual
Notice for Use
Thank you for choosing Eleaf products! Please read this manual carefully before use so
as to use correctly. If you require additional information or have questions about the
product or its use, please consult your local agents, or visit our website at
www.eleafworld.com.
Product Introduction
iStick is an knock-out product implementing the latest technology with a metallic
appearance. Its trait is the appearance artful, easy to take. There are four colors
for your option: black, silver, red and blue. Meanwhile, the output wattage is
strong, up to 20W. The highlight is the incremental OLED screen displaying
battery condition, resistance, wattage and voltage. You can know them clearly at a
glance. The voltage is adjustable vary from 3.0V to 5.5V according to your vaping
habit.
Parameter
Size: 75mm*21mm*32.8mm
Color: black, sliver, red, blue
Capacity: 2200mAh
Thread Type: 510 Thread
How to use
Press the square button for five times to turn on the battery, and then long press the
square button to get a puff.
up arrow button
the square button
down arrow button the OLED screen
Switch the VV/VW mode: Press the square button for three times to switch the VV/VW
mode when the battery is turned on.
Adjust the voltage/wattage: Press the plus or minus direction button to increase or
decrease the voltage/wattage. The voltage is adjustable vary from 3.0V to 5.5V, and the
wattage can be up to 20W. Long press the plus or minus direction button to enter the
AUTO mode, increase or decrease voltage/wattage by 0.1V/W. Press the plus or minus
direction button again, increase or decrease voltage/wattage by 0.2V/W. If still press the
plus or minus direction button one more time, then increase or decrease voltage/wattage
by 0.5V/W. Press the plus or minus direction button to choose the voltage/wattage you
want. If you want to choose the voltage/wattage halfway, just press the opposite direction
button to stop the increasing or decreasing voltage/wattage.
How to charge
iStick is charged through USB port at the bottom. One can take puffs while it is being
charged.
down arrow button
Computer
Wall Adapter
the square button
up arrow button
USB Cable Charge
Properties of iStick
Power on and Power off: Press the button for five times to power on and off the battery.
Over 10s Protection: When you keep pressing the button for over 10 seconds, the output
will shut off and the OLED screen will reflect “Over 10s”.
Atomizer Short-circuit Protection: When atomizer short-circuit occurs, the OLED screen
will reflect “Atomizer Short”.
Low-voltage Protection: When the voltage of battery is below 3.3V, the OLED screen will
reflect “Lock”.
Unlock the Low-voltage Protection: When the voltage of battery is above 3.65V, the
low-voltage protection will be unlocked.
Low power Alert: If the battery’s power is lower than 10%, the power symbol on the
screen will flash.
High-safety, high-capacity, high-magnification and high-stability lithium battery.
On the top end of the battery, there are Eleaf branded logo silk-screen and CE marking
laser.
On the bottom of the battery, there are the branded laser and silk-screen, the
significant symbols of Eleaf brand.
Precautions
a) Only have your iStick repaired by Eleaf. Do not attempt to repair the unit by yourself as
damage or personal injury may occur.
b) Do not leave the iStick in high temperatures or damp conditions, otherwise it may be
damaged. The appropriate operation temperature is within 0℃to45℃ while charging
and -10℃ to 60℃ while using.
c) Do not attempt to combine the iStick with parts from other brands of e-cigarettes. If it is
damaged in this way, our company will not take on responsibility and your warranty will
be void.
Warranty
Please consult your Eleaf product warranty card. We are not responsible for any
damages caused by human error. Our warranty is not available for products purchased
from third-party vendors.
Email:[email protected]
Web:www.eleafworld.com