Download Double Agent User Manual
Transcript
Using your Gentleman's Double Agent Vaporizing unit It is recommended to fully charge your vaporizer unit before use, for best results. Gentleman's Double Agent is equipped with USB passthrough technology and high speed charging. Thr USB miniport is located under the protective screw cap at the bottom of the unit. When the unit is plugged in to charge, the red light ring will turn on. When the light turns off, the pen is fully charged! If you don't want to wait the full charge time before vaping, thanks to passthrough technology, you can vape while charging. Another great feature of this vaporizing unit is variable volt technology. The Double Agent features 3 heat settings to customize your vaping experience. To toggle between heat settings click the button 5 times quickly. Red LED light: 3.2 Volts. This is the lowest heat setting, ideal for light vapor mouthfuls and long cartridge life. Use this for AtmosRX, Gentleman’s E-20, and Tank atomizers. Purple LED light: 3.7 Volts. The most versatile heat setting. Compares to Gentleman's Ambassador Pen. Great for dual coil cartridges and Gentleman's Widowmaker cartridges – as well as most ECigarette cartridges. Blue LED light: 4.2 Volts. This heat setting is the hottest available for a Low Heat Class pen. It allows for fuller, heavier vapor mouthfuls; allowing the user to take full advantage of those larger cartridges (such as Gentleman's Widowmaker) and various "pack your own" cartridges (such as Omicon cartridges made for 3.7V use, and Gentleman's "Pure Gold" and "Herbalizer" cartridges). Also included with the Double Agent vaporizing unit are two optional mouthtips to further improve your vaping experience. To use them, simply pop off the stock mouthtip of your cartridge (soft or hard tip) and replace it with one of these! Finding it hard to choose which one? The metal tip,while it looks sleeker and offers a sturdier mouth feel; is often preffered with lower heat settings. If you plan on using it often, be careful as it does transfer heat and may become hot to the touch. On the other hand, the polyeurethane tip is heat safe. It had a softer mouth feel, and has the advantage of not transferring heat. If you are a frequent, or higher setting user, this just might be the tip for you! It’s also a great alternative to the “plastic covers” included with various RX cartridges. Wondering what that second thread is for on your pen? It’s for accepting anything with an eGo thread – i.e. Widow Maker Cartridges or eGo Atomizers. And when you are using an E-20 cartridge? We included two kinds of discretion cone for your Double Agent unit (the black discretion cone and the stainless "short" cone). Use them, or not; switch them up! Give your pen a whole new look and protect the threading of your cartridge when it is in your pocket or purse! While many in the Rx cartridge business have taken the proprietary threading route; we here at Gentleman's feel that as a consumer, you should not have to limit yourself to one kind of cartridge. Instead, we feel that you should be able to try them all out and make your own decision! To help you with this, we are proud to present the Rx thread adapters - Compatible with the popular "Atmos" and "Omicon" cartridges. Simply screw the thread adapter in between your Gentleman's brand vaporizing unit and your Rx cartridge; and voila! You are all set to vape!