1
Download EFX LITE 62 Manual
Transcript
SAFETY PRECAUTIONS WARNING To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. CAUTION To reduce the risk of fire or electric shock, do not remove screws. There are no user serviceable parts inside. Refer servicing to qualified service personnel WARRANTY Musicom Lab warrants this product against any defects that are due to defective parts or faulty workmanship for a period of one years from the date of original retail purchase. During this one years period, Musicom Lab will repair it without charge for parts or labor. However shipping charges to and from the repair location must be paid by the owner. ˍG G This warranty does not include damage to the product resulting from accident or misuse. ˍG G This warranty shall not apply to any goods that have been repaired or altered by anyone other than the manufacturer. Contact the following for support and/or repair service. Mail : Musicom Lab 15-4, Seooreung-ro 15-gil, Eunpyeong-gu, Seoul, 03426, South Korea Website : http://www.musicomlab.com Email : [email protected] Thank you for purchasing the Musicom Lab EFX LITE 62M Audio Controller. This Manual will introduce you to the EFX LITE 62M and its features. Make sure to keep this for future reference. Table of Contents 4 Main Features Specifications Block Diagram Basic Connection 4 4 5 5 2. Fundamentals 6 2.1 Preset Mode 2.2 Song Mode 2.3 Set Mode 6 8 9 1. Introduction 1.1 1.2 1.3 1.4 3. EDIT Mode 10 4. MIDI Menu 10 4.1 Global Setting 4.1.1 4.1.2 4.1.3 4.1.4 4.1.5 11 MIDI OUT/THRU Receive MIDI Channel MIDI Program Change Channel MIDI Control Change Channel/Number/Value XPDL Global Setting 4.2.1 MIDI Program Change Number 4.2.2 XPDL Preset Setting 5. COPY Menu 5.1 Preset Copy 5.2 Bank Copy 5.3 Song Copy 5.4 Set Copy 6. TITLES Menu 6.1 Preset Titles 6.2 Song Titles 7. SONG/SET Menu 7.1 Song Create/Edit 7.2 Set Create/Edit 8. UTILITY Menu 8.1 Operating Mode 8.2 Click-Less 8.3 Maximum Instant Access Page 8.4 Switch Type (Latched/Momentary) 8.5 DATA Dump 8.6 DATA Load 8.7 Factory Default Setting 9. Cables 9.1 External BANK UP/DOWN Switches 9.2 XPDL 9.3 Function Switches 10. Connection Examples 4.2 Preset Setting 12 12 13 14 15 16 17 18 20 21 21 22 22 23 24 24 25 26 26 27 28 28 29 29 30 30 30 31 31 31 32 33 1. Introduction Thank you for purchasing the Musicom Lab EFX LITE 62M Audio Controller. The EFX LITE 62M Audio Controller is the ultimate floor-based switching system. It is a compact, easy to use, has 6 fully programmable loops, 2 function switches and a MIDI foot controller. The EFX LITE 62M Audio Controller has 248 memory locations, configured as 62 banks of 4 presets, plus a global preset. It can transmit 6 MIDI Program Change messages on 6 MIDI channels and 16 MIDI Control Change messages on an appointed MIDI channel. Also one continuous controller port(XPDL) is included and can be programmed with a designated MIDI channel and controller number. The EFX LITE 62M Audio Controller has a low-noise, high quality buffer to prevent the loss of guitar signal. The input buffer can be bypassed for Hi-Z input pedals such as Fuzzes etc. 1.1 Main Features ˍG G 6 audio loops arranged in a group of 4/1/1. ˍG G Last 2 audio loops will act as function switch. ˍG G 2 function switches (latched or momentary). ˍG G 4 presets per bank ˍG G 4 presets per song ˍG G 249 preset memory locations ˍG G 62 banks of 4 presets, plus a Global Preset ˍG G One expression pedal port (global or preset) ˍG G Song and Set modes ˍG G Create up to 99 songs ˍG G Organize the 99 Songs into 9 sets of 32 songs ˍG G 2-line x 16-character LCD display with backlight ˍG G Easily copy presets, banks, songs and sets ˍG G Easily name presets and songs ˍG G Bulk data dump and load capability ˍG G Heavy-duty stomp switches and gold-plated relays 1.2 Specifications ˍG G Buffer Input Impedance ................... 1 Mȳ ˍG G Buffer Output Impedance .................. 150 ȳ ˍG G Current Draw ..................................... 180 mA (DC12V Center Negative) ˍG G Dimensions ........................................ 310(W) x 82(D) x 52(H) mm 12.2(W) x 3.2(D) x 2.1(H) inches ˍG G Weight ............................................... 880 g / 2.0 lbs EFX LITE 62M Audio Controller Owner's Manual 4 1.3 Block Diagram 1.4 Basic Connection CHANNEL / REVERB AMP VOLUME PEDAL OD BOOST EFX LITE 62M COMP DIST CHORUS DELAY TUNER EFX LITE 62M Audio Controller Owner's Manual 5 2. Fundamentals The EFX LITE 62M has three different operating modes, plus Instant Access Mode and Edit Mode. The operating modes are Preset(PRST), Song(SONG) and Set(SET1-SET9) 2.1 Preset Mode The Preset Operating Mode allows the EFX LITE 62M to behave like a standard footcontroller with bank(62) of preset(4) plus a Global Preset. ˍG G Line ˍG G Line ˍG G Line ˍG G Line ˍG G Line 1 1 2 2 2 and 2 - a to d indicate a bank number. - e to p indicate the preset title. - e indicates the preset (1 to 4) within the bank. - g to n indicate the on/off status of loops and function switches. - p indicates the preset mode. ྙG Press/hold the 2ND switch for 1 second. The LEDs above the 3 and 4 switches and the bank number on the display will start flashing. ྚG Press the 3(BANK DOWN) or 4(BANK UP) switches to scroll through the 62 available banks. ྛG Press the 2ND switch. The LEDs above the 3 and 4 switches will stop flashing. ྜG The preset is selected via pressing any switches from 1 through 4. The bank number will stop flashing and the LED above the switch turn on. NOTE : If you want to select the preset 1 or 2, skip the procedure ྛ~ྜG and press the 1 or 2 switch. The global preset is a preset with all the capabilities of preset 1 through 4, but is the same for all banks. Pressing the switch of a preset that is already on selects the global preset and will cause the LED above the switch to turn off. EFX LITE 62M Audio Controller Owner's Manual 6 How to edit Presets (Instant Access Mode) ˍG G Line ˍG G Line ˍG G Line ˍG G Line ˍG G Line 1 1 2 2 2 and 2 - a to d indicate a bank or song number. - e to p indicate the preset or song title. - e indicates the preset (1 to 5) within the bank or song. - g to n indicate the on/off status of loops and function switches. - p indicates the instant access page (1 to 4 with underscore). ྙG Select the preset to be programmed in the Preset, Song or Set Mode. ྚG Press the 2ND switch to enter the Instant Access Mode. The 4 LEDs above the 1 ~ 4 switches will indicate the corresponding Loop1 ~ Loop4 as on or off. ྛG Press the 1 through 4 switches to turn the corresponding Loop1 ~ Loop4 on or off. The corresponding LEDs will go on or off. ྜG Press the 2ND switch. The 4 LEDs above the 1 ~ 4 switches will indicate the corresponding Loop5, Loop6, Function Switch7 and Function Switch8 as on or off. ྜྷG Press the 1 through 4 switches to turn the corresponding Loop5, Loop6, Function Switch7 and Function Switch8 on or off. The corresponding LEDs will go on or off. ྞG Press the 2ND switch. The 4 LEDs above the 1 ~ 4 switches will indicate the corresponding CC.A ~ CC.D as on or off. ྟG Press the 1 through 4 switches to turn the corresponding CC.A ~ CC.D on or off. The corresponding LEDs will go on or off. ྠG Press the 2ND switch. The 4 LEDs above the 1 ~ 4 switches will indicate the corresponding CC.E ~ CC.H as on or off. ྡG Press the 1 through 4 switches to turn the corresponding CC.E ~ CC.H on or off. The corresponding LEDs will go on or off. ྡྷG Press & hold the 2ND switch for 1 second to store the edit and return to Preset, Song or Set Mode. For the other side, press & hold the 2ND switch and quickly press the 1 switch to return to Preset, Song or Set Mode without storing the edit. ˍG G Max IA Page can be used to prevent access higher-numbered IA pages. Refer to the Maximum Instant Access Page on the page 29. Mute Press & hold the switch of a preset that is already on, for 1 second. The audio signal will be muted. Press the any preset switch to cancel the mute function. The mute function is not available on the global preset. Refer to the 1.3 Block Diagram on the page 5. EFX LITE 62M Audio Controller Owner's Manual 7 2.2 Song Mode The Song Operating Mode allows access to the EFX LITE 62M's 99 songs. Songs are basically a custom bank of the EFX LITE 62M's regular (banked) presets, arranged so that all the presets necessary during the performance of a song are available in one bank (conveniently called a song). Refer to the 8.1 Operating Mode on the page 28 to select the EFX LITE 62M's Song Mode. ˍG G Line ˍG G Line ˍG G Line ˍG G Line ˍG G Line 1 1 2 2 2 and 2 - a to d indicate a song number. - e to p indicate the song title. - e indicates the preset (1 to 4) within the song. - g to n indicate the on/off status of loops and function switches. - p indicates the song mode. ྙG Press/hold the 2ND switch for 1 second. The LEDs above the 3 and 4 switches and the song number on the display will start flashing. ྚG Press the 3(BANK DOWN) or 4(BANK UP) switches to scroll through the 99 available songs. ྛG Press the 2ND switch. The LEDs above the 3 and 4 switches will stop flashing. ྜG The preset is selected via pressing any switches from 1 through 4. The song number will stop flashing and the LED above the switch turn on. NOTE : If you want to select the preset 1 or 2, skip the procedure ྛ~ྜG and press the 1 or 2 switch. The global preset is a preset with all the capabilities of preset 1 through 4, but is the same for all songs. Pressing the switch of a preset that is already on selects the global preset and will cause the LED above the switch to turn off. EFX LITE 62M Audio Controller Owner's Manual 8 2.3 Set Mode The SET0 - SET9 Operating Mode allows up to 32 of the EFX LITE 62M's 99 songs to be arranged in any order to create a set. The EFX LITE 62M can support 9 different sets. Refer to the 8.1 Operating Mode on the page 28 to select the EFX LITE 62M's Set Mode. ˍG G Line ˍG G Line ˍG G Line ˍG G Line ˍG G Line 1 1 2 2 2 and 2 - a to d indicate a song number. - e to p indicate the song titles. - e indicates the preset (1 to 5) within the song. - g to n indicate theon/off status of loops and function switches. - p indicates the current set mode (1 to 9). ྙG Press/hold the 2ND switch for 1 second. The LEDs above the 3 and 4 switches and the song number on the display will start flashing. ྚG Press the 3(BANK DOWN) or 4(BANK UP) switches to scroll through the 32 available songs. ྛG Press the 2ND switch. The LEDs above the 3 and 4 switches will stop blinking. ྜG The preset is selected via pressing any switches from 1 through 4. The song number will stop flashing and the LED above the switch turn on. NOTE : If you want to select the preset 1 or 2, skip the procedure ྛ~ྜG and press the 1 or 2 switch. The global preset is a preset with all the capabilities of preset 1 through 4, but is the same for all songs. Pressing the switch of a preset that is already on selects the global preset and will cause the LED above the switch to turn off. EFX LITE 62M Audio Controller Owner's Manual 9 3. EDIT Mode To enter the Edit Mode, press and hold the 2ND switch and quickly press the 1 switch. The display will show (the following Edit Menu). SHIFT (2) Move the menu selection from left to right (and back) ENTER/STORE (2ND) Enter to the selected menu EXIT (1) Exit from the edit mode. 4. MIDI Menu The MIDI Menu provides access to the MIDI features of the EFX LITE 62M. SHIFT (2) Move the menu selection from left to right (and back) ENTER/STORE (2ND) Enter to the selected menu EXIT (1) Exit from the MIDI menu EFX LITE 62M Audio Controller Owner's Manual 10 4.1 Global Setting The Global Setting Menu allows defining global parameters such as ; the MIDI channel that the EFX LITE 62M will respond to incoming MIDI messages on, the MIDI program/control change channel and control number/value that the EFX LITE 62M will transmit, and expression pedal port control change setting. OUT/THRU OUT or THRU RECV Channel 1 to 16 or OFF PC.1 Channel 1 to 16 ୖ PC,6 Channel 1 to 16 Channel 1 to 16 Number 000 to 127 or OFF OnValu 000 to 127 or OFF OffValu 000 to 127 or OFF Channel 1 to 16 Number 000 to 127 or OFF OnValu 000 to 127 or OFF OffValu 000 to 127 or OFF Channel 1 to 16 Number 000 to 127 or OFF MaxValu 000 to 127 MinValu 000 to 127 CC.1 ୖ CC.H XPDL EFX LITE 62M Audio Controller Owner's Manual 11 4.1.1 MIDI OUT/THRU The MIDI OUT/THRU connector of the EFX LITE 6M functions as a MIDI OUT or MIDI THRU. When MIDI OUT operation is selected, MIDI data in the EFX LITE 62M are transmitted via the MIDI OUT connector. When MIDI THRU operation is selected, received MIDI data via the MIDI IN connector is retransmitted via the MIDI OUT connector. In this case, MIDI data in the EFX LITE 62M are not transmitted. ˍG G Line 2 - l to p on the display indicate the MIDI OUT or MIDI THRU(OUT/THRU). SHIFT DEC Move the menu selection from left to right (and back) (2) (3) & INC (4) ̲ Move to the previous/next Global Setting menu ̲ Switch/toggle the MIDI OUT and MIDI THRU ENTER/STORE (2ND) Store any changes made while in the selected menu EXIT (1) Exit to the MIDI menu 4.1.2 Receive MIDI Channel The EFX LITE 62M can receive the MIDI program change message. The receive MIDI channel can be set to any individual channel from 1 to through 16, or reception can be turned off. ˍG G Line 2 - n to p on the display indicate the MIDI program change channel(01 to 16 or OFF) that the EFX LITE 62M will receive. SHIFT DEC Move the menu selection from left to right (and back) (2) (3) & INC (4) ̲ Move to the previous/next Global Setting menu ̲ Increase/decrease through the 16 MIDI channel (01 to 16 or OFF) ENTER/STORE (2ND) Store any changes made while in the selected menu EXIT (1) Exit to the MIDI menu EFX LITE 62M Audio Controller Owner's Manual 12 4.1.3 MIDI Program Change Channel The EFX LITE 62M can transmit 6 MIDI program change messages (PC1 to PC6). Six MIDI program change messages are transmitted when an EFX LITE 62M preset is recalled to aid in selecting the desired preset on a external MIDI device. This menu allows for the assignment of MIDI program change channels. ˍG G Line 2 - d indicates the MIDI program change (1 to 6). ˍG G Line 2 - o and p indicate the MIDI program change channel (01 to 16) that the EFX LITE 62M will transmit. SHIFT DEC Move the menu selection from left to right (and back) (2) (3) & INC (4) ̲ Move to the previous/next Global Setting menu ̲ Increase/decrease through the 16 MIDI channel (01 to 16) ENTER/STORE (2ND) Store any changes made while in the selected menu EXIT (1) Exit to the MIDI menu EFX LITE 62M Audio Controller Owner's Manual 13 4.1.4 MIDI Control Change Channel/Number/Value The EFX LITE 62M can transmit up to 16 MIDI control change messages (CC.1 to CC.8 and CC.A to CC.H). This menu allows for the assignment of MIDI control changes. ˍG G Line 2 - d indicates the MIDI control change (1 to 8 and A to H). ˍG G Line 2 - o and p indicate the MIDI control change channel (01 to 16). ˍG G Line 2 - d indicates the MIDI control change (1 to 8 and A to H). ˍG G Line 2 - n to p indicate the MIDI control change number (000 to 127 or OFF). ˍG G Line 2 - d indicates the MIDI control change (1 to 8 and A to H). ˍG G Line 2 - n to p indicate the MIDI control change value (000 to 127 or OFF) when a instant access switch will be 'ON'. ˍG G Line 2 - d indicates the MIDI control change (1 to 8 and A to H). ˍG G Line 2 - n to p on the display indicate the MIDI control change value (000 to 127 or OFF) when a instant access switch will be 'OFF'. SHIFT DEC Move the menu selection from left to right (and back) (2) (3) & INC (4) ̲ Move to the previous/next Global Setting menu ̲ Move/scroll the Channel/Number/OnValu/OffValu menu ̲ Increase/decrease the current value ˍG Channel : ˍG Number : ˍG On Value ˍG Off Value 01 to 16 000 to 127 or OFF : 000 to 127 or OFF : 000 to 127 or OFF ENTER/STORE (2ND) Store any changes made while in the selected menu EXIT (1) Exit to the MIDI menu EFX LITE 62M Audio Controller Owner's Manual 14 4.1.5 XPDL Global Setting This menu allows assigning the global setting(MIDI control change channel, number, maximum value and minimum value) for the expression pedal port. ˍG G Line 2 - o and p indicate the XPDL MIDI control change channel (01 to 16). ˍG G Line 2 - n to p indicate the XPDL MIDI control change number (000 to 127 or OFF). ˍG G Line 2 - n to p indicate the highest XPDL MIDI control change value (000 to 127) that the expression pedal port can transmit when its pedal is moved. ˍG G Line 2 - n to p indicate the lowest XPDL MIDI control change value (000 to 127) that the expression pedal port can transmit when its pedal is moved. SHIFT DEC Move the menu selection from left to right (and back) (2) (3) & INC (4) ̲ Move to the previous/next Global Setting menu ̲ Move/scroll the Channel/Number/MaxValu/MinValu menu ̲ Increase/decrease the current value ˍG Channel : 01 to 16 ˍG Number : 000 to 127 or OFF ˍG Maximum Value : 000 to 127 ˍG Minimum Value : 000 to 127 ENTER/STORE (2ND) Store any changes made while in the selected menu EXIT (1) Exit to the MIDI menu EFX LITE 62M Audio Controller Owner's Manual 15 4.2 Preset Setting The menu allows assigning 6 MIDI program change number and determining how the expression port will function when used function in the preset. PC.1 Number 001 to 128 or OFF PC.2 Number 001 to 128 or OFF ୖ PC.6 Number 001 to 128 or OFF XPDL Select Global or Preset XPDL Channel 01 to 16 XPDL Number 000 to 127 or OFF XPDL MaxValu 000 to 127 XPDL MinValu 000 to 127 XPDL BegValu 000 to 127, OFF or PDL Move/scroll a preset EFX LITE 62M Audio Controller Owner's Manual 16 4.2.1 MIDI Program Change Number The EFX LITE 62M can transmit 6 MIDI program change messages (PC.1 to PC.6). Six MIDI program change messages are transmitted when an EFX LITE 62M preset is recalled to aid in selecting the desired preset on a external MIDI device. This sub-menu allows for the assignment of MIDI program change numbers. ˍG G Line ˍG G Line ˍG G Line ˍG G Line 1 1 2 2 SHIFT DEC - b and c indicate the bank number (01 to 62) that the preset is located in. f indicates the preset (1 to 4 or 0 for the Global Preset) that is going to be created/modified. d indicates the MIDI program change (1 to 6). n to p indicate the MIDI program change number(001 to 128 or OFF) that the EFX LITE 62M will transmit. Move the menu selection from left to right (and back) (2) (3) & INC (4) ̲ Move/scroll a bank/preset number ̲ Move/scroll the PC.1 Number to PC.6 Number or XPDL menu ̲ Increase/decrease the current value ˍG Number : 01 to 128 or OFF ENTER/STORE (2ND) Store any changes made while in the selected menu EXIT (1) Exit to the MIDI menu EFX LITE 62M Audio Controller Owner's Manual 17 4.2.2 XPDL Preset Setting The expression pedal port can be set to use its global setting or preset setting specific setting for MIDI control change channel, number, maximum, minimum and beginning values. ˍG G Line 1 - b and c indicate the bank number (01 to 62) that the preset is located in. ˍG G Line 1 - f indicates the preset (1 to 4 or 0 for the Global Preset) that is going to be created/modified. ˍG G Line 2 - m to p indicate whether the XPDL is configured as Global (GLOB) or Preset (PRST). ˍG G Line 2 - o and p indicate the XPDL MIDI control change channel (01 to 16). ˍG G Line 2 - n to p indicate the XPDL MIDI control change number (000 to 127 or OFF). ˍG G Line 2 - n to p indicate the highest XPDL MIDI control change value (000 to 127) that the expression pedal port can transmit when its pedal is moved. ˍG G Line 2 - n to p indicate the lowest XPDL MIDI control change value (000 to 127) that the expression pedal port can transmit when its pedal is moved. EFX LITE 62M Audio Controller Owner's Manual 18 ˍG G Line 2 - n to p indicate the initial XPDL MIDI control change value (000 to 127, or OFF) that the expression pedal port will transmit when the preset is selected. SHIFT DEC Move the menu selection from left to right (and back) (2) (3) & INC (4) ̲ Move/scroll a bank/preset number ̲ Move/scroll the XPDL Select/Channel/Number/MaxValu/MinValu/BegValu or PC.x Number ̲ Increase/decrease the current value ˍG Select : Global(GLOB) or Preset(PRST) ˍG Channel : 01 to 16 ˍG Number : 000 to 127 or OFF ˍG Maximum Value : 000 to 127 ˍG Minimum Value : 000 to 127 ˍG beginning Value : 000 to 127 , OFF or PDL ENTER/STORE (2ND) Store any changes made while in the selected menu EXIT (1) Exit to the MIDI menu EFX LITE 62M Audio Controller Owner's Manual 19 5. Copy Menu The Copy Menu allows copying presets, banks, songs and sets from one location to another. SHIFT (2) Move the menu selection from left to right (and back) ̲ ̲ ̲ ̲ PRST : Preset Copy BNK : Bank Copy SNG : Song Copy SET : Set Copy ENTER/STORE (2ND) Enter to the selected menu EXIT (1) Exit from the COPY menu EFX LITE 62M Audio Controller Owner's Manual 20 5.1 Preset Copy The menu allows for a single preset to be copied from on preset location to another. ˍG G Line 2 - b, c and f indicate the preset that is going to be copied. ˍG G Line 2 - l, m and p indicate the destination preset location to copy to. SHIFT DEC Move the menu selection from left to right (and back) (2) (3) & INC (4) ̲ Move/scroll a preset that is going to be copied ̲ Move/scroll a destination preset location to copy to ENTER/STORE (2ND) Copy any changes made while in the selected menu EXIT (1) Exit to the COPY menu 5.2 Bank Copy The menu allows for an entire bank of five presets to be copied from one bank location to another. ˍG G Line 2 - e and f indicate the bank (01 to 62) that is going to be copied. ˍG G Line 2 - o and p indicate the destination bank location (01 to 62) to copy to. SHIFT DEC Move the menu selection from left to right (and back) (2) (3) & INC (4) ̲ Move/scroll a bank that is going to be copied ̲ Move/scroll a destination bank location to copy to ENTER/STORE (2ND) Copy any changes made while in the selected menu EXIT (1) Exit to the COPY menu EFX LITE 62M Audio Controller Owner's Manual 21 5.3 Song Copy The menu allows for a song to be copied from one song location to another. This sub-menu copies the presets and locations associated with the song to be copied. ˍG G Line 2 - e and f indicate the song (01 to 99) that is going to be copied. ˍG G Line 2 - o and p indicate the destination song location (01 to 99) to copy to. SHIFT DEC Move the menu selection from left to right (and back) (2) (3) & INC (4) ̲ Move/scroll a song that is going to be copied ̲ Move/scroll a destination song location to copy to ENTER/STORE (2ND) Copy any changes made while in the selected menu EXIT (1) Exit to the COPY menu 5.4 Set Copy The sub-menu allows for an entire set to be copied from one set location to another. This sub-menu copies all of the songs and their order of an entire set (32 songs). ˍG G Line 2 - e indicates the set (1 to 9) that is going to be copied. ˍG G Line 2 - p indicates the destination set location (1 to 9) to copy to. SHIFT DEC Move the menu selection from left to right (and back) (2) (3) & INC (4) ̲ Move/scroll a set that is going to be copied ̲ Move/scroll a destination set location to copy to ENTER/STORE (2ND) Copy any changes made while in the selected menu EXIT (1) Exit to the COPY menu EFX LITE 62M Audio Controller Owner's Manual 22 6. Titles Menu The Titles Menu allows for custom titles to be entered for each all presets and songs. Each custom preset and song title can be up to 12 characters in length. SHIFT (2) Move the menu selection from left to right (and back) ̲ PRESET : Preset Titles ̲ SONG : Song Titles ENTER/STORE (2ND) Enter to the selected menu EXIT (1) Exit from the TITLES menu EFX LITE 62M Audio Controller Owner's Manual 23 6.1 Preset Titles The menu allows for a custom preset title, up to 12 characters in length, to be created/modified for each of the all presets. ˍG G Line 1 - b, c and f indicate the preset that is going to be created/modified. ˍG G Line 2 - c to n indicate the preset title. SHIFT DEC Move the menu selection or cursor from left to right (and back) (2) (3) & INC (4) ̲ Move/scroll a preset that is going to be created/ modified ̲ Move/scroll through the available characters ENTER/STORE (2ND) Store any changes made while in the selected menu EXIT (1) Exit to the TITLES menu 6.2 Song Titles The menu allows for a custom song title, up to 12 characters in length, to be created/modified for each of the all 99 songs. ˍG G Line 1 - b and c indicate the song that is going to be created/modified. ˍG G Line 2 - c to n indicate the song title. SHIFT DEC Move the menu selection or cursor from left to right (and back) (2) (3) & INC (4) ̲ Move/scroll a song that is going to be created/ modified ̲ Move/scroll through the available characters ENTER/STORE (2ND) Store any changes made while in the selected menu EXIT (1) Exit to the TITLES menu EFX LITE 62M Audio Controller Owner's Manual 24 7. Song/Set Menu The Song/Set Menu allows for regular presets to be organized in a custom bank to create a song (or custom bank of presets). Multiple songs can then be arranged in a bank order to create a set. SHIFT (2) Move the menu selection from left to right (and back) ̲ SONG : Song Create/Edit ̲ SET : Set Create/Edit ENTER/STORE (2ND) Enter to the selected menu EXIT (1) Exit from the SONG/SET menu EFX LITE 62M Audio Controller Owner's Manual 25 7.1 Song Create/Edit The menu allows you to create a song (custom bank of presets) by assigning 4 presets. Each song contains 4 presets. The EFX LITE 62M can support 99 songs, each with a 12 character title, and they can be accessed via SONG and SET1 - SET9 Operating Modes. ˍG G Line ˍG G Line ˍG G Line ˍG G Line 2 2 2 2 SHIFT DEC - e and f on the display indicate the song number (01 to 99) that is going to be created/edited. i on the display indicates the preset number (1 to 4) within the song. l and m on the display indicate the bank number (01 to 62) that the original preset is located in. p on the display indicates the preset number (1 to 4) in the above bank to be used in the song. Move the menu selection from left to right (and back) (2) (3) & INC (4) ̲ Move/scroll a song/preset number that is going to be created/edited ̲ Move/scroll a bank/preset number ENTER/STORE (2ND) Store any changes made while in the selected menu EXIT (1) Exit to the SONG/SET menu 7.2 Set Create/Edit The sub-menu allows songs to be arranged in a bank order to create set. The EFX LITE 62M can support 9 sets, they are accessed via SET1 - SET9 Operating Modes. ˍG G Line 2 - d indicates the set number (1 to 9) that is going to be created/edited. ˍG G Line 2 - i and j indicate the song number (01 to 32) within the set. ˍG G Line 2 - o and p indicate the original song number (01 to 99) to be used in the set. SHIFT DEC Move the menu selection or left to right (and back) (2) (3) & INC (4) ̲ Move/scroll a set number that is going to be created/edited ̲ Move/scroll a song number within the set ̲ Move/scroll a original song number to be used in the set ENTER/STORE (2ND) Store any changes made while in the selected menu EXIT (1) Exit to the SONG/SET menu EFX LITE 62M Audio Controller Owner's Manual 26 8. Utility Menu The Song/Set Menu allows configuring the EFX LITE 62M's general functionality by selecting its operating mode, Click-Less, maximum instant access page and defining how the 4 function switches will function when used. Its sub-menu's also provide access to the data dump/load and factory default setting. Operating Mode PRST, SONG or SET1 to SET9 Click-Less OFF, L1-L4, L1-L5 or L1-L6 Max IA Page 2 to 4 L5 LATCHED or MOMENTARY L6 LATCHED or MOMENTARY F7 LATCHED or MOMENTARY F8 LATCHED or MOMENTARY SysEx Data DUMP SysEx Data LOAD Factory Setting EFX LITE 62M Audio Controller Owner's Manual Y or N 27 8.1 Operating Mode The menu allows determining the operating mode of the EFX LITE 62M. ˍG G Line 2 - m to p indicate the operation mode (PRST, SONG, SET1 - SET9). SHIFT DEC Move the menu selection from left to right (and back) (2) (3) & INC (4) ̲ Move to the previous/next UTILITY menu ̲ Move/scroll through and select the desired operating mode ENTER/STORE (2ND) Store any changes made while in the selected menu EXIT (1) Exit from the UTILITY menu 8.2 Click-Less The EFX LITE 62M is based on relay switching. This method is utilized to route the audio signal with absolutely no tone coloration or degradation. The disadvantage of relays is that they can produce a slight click noise when they switch on/off. To eliminate this click noise, the EFX LITE 62M will disable the OUT from loop 4 for a very short time while the loops are switching. The Click-Less function is excellent for eliminating this click noise. The menu allows determining the Click-Less function. ˍG G Line 2 - n to p indicate the Click-Less function (OFF, L1-L4, L1-L5 or L1-L6). SHIFT DEC Move the menu selection from left to right (and back) (2) (3) & INC (4) ̲ Move to the previous/next UTILITY menu ̲ Move/scroll the Click-Less function ENTER/STORE (2ND) Store any changes made while in the selected menu EXIT (1) Exit from the UTILITY menu EFX LITE 62M Audio Controller Owner's Manual 28 8.3 Maximum Instant Access Page This menu blocks to access to IA pages numbered above the Max IA Page. When set '2', this unit will transmit up to 8 MIDI control change messages (CC.1 to CC.8). When set '3', this unit will transmit up to 12 MIDI control change messages (CC.1 to CC.8 and CC.A to CC.D). When set '4', this unit will transmit up to 16 MIDI control change messages (CC.1 to CC.8 and CC.A to CC.H). ˍG G Line 2 - p indicates the Maximum Instant Access Page (2 to 4). SHIFT DEC Move the menu selection from left to right (and back) (2) (3) & INC (4) ̲ Move to the previous/next UTILITY menu ̲ Move/scroll through and select the desired Max IA page size. ENTER/STORE (2ND) Store any changes made while in the selected menu EXIT (1) Exit from the UTILITY menu 8.4 Switch Type (Latched/Momentary) The F7 and F8 Operate as mechanical latched or momentary type switches for switching of amplifier channels or on/off control of reverb, etc. Also the Loop 5 and Loop 6 will be able to act as the F7 and F8. Normally open and normally closed operation are selected by plugging into either the OUT5/6 jacks(for normally open), or the SND5/6 jacks(for normally closed). The menu allows for the selection of the Latched/Momentary type. ˍG G Line 2 - a and b indicate a loop (L5, L6) or function switch (F7, F8) that is going to be edited. ˍG G Line 2 - h to p indicate the function switch type (LATCHED or MOMENTARY). SHIFT DEC Move the menu selection from left to right (and back) (2) (3) & INC (4) ̲ Move to the previous/next UTILITY menu ̲ Switch/toggle the function switch type ENTER/STORE (2ND) Store any changes made while in the selected menu EXIT (1) Exit from the UTILITY menu EFX LITE 62M Audio Controller Owner's Manual 29 8.5 DATA Dump This menu allows the EFX LITE 62M user data to be dumped (transmitted) to a computer or another EFX LITE 62M, via this unit's MIDI OUT/THRU jack. User data is dumped as a MIDI System Exclusive message. DEC (3) & INC (4) Move to the previous/next UTILITY menu ENTER/STORE (2ND) Start dumping EXIT (1) Exit from the UTILITY menu 8.6 DATA Load This menu allows the EFX LITE 62M user data to be loaded (received) to a computer or another EFX LITE 62M, via this unit's MIDI IN jack. User data is loaded as a MIDI System Exclusive message. DEC (3) & INC (4) Move to the previous/next UTILITY menu Exit from the UTILITY menu EXIT (1) 8.7 Factory Default Setting This sub-menu allows erasing all user data from the internal EEPROM memory. ˍG G Line 2 - p indicates the Yes or No (Y or N). SHIFT DEC Move the menu selection or cursor from left to right (and back) (2) (3) & INC (4) ̲ Move to the previous/next UTILITY menu ̲ Switch/toggle the Yes or No ENTER/STORE (2ND) Start the factory default setting EXIT (1) Exit from the UTILITY menu EFX LITE 62M Audio Controller Owner's Manual 30 9. Cables 9.1 External BANK UP/DOWN Switches The Bank UP and DOWN can be controlled by the Momentary & Normally Open type switches connected to the BANK jack. The cable required is a stereo (TRS) plugs. The BANK UP switch is connected to tip and sleeve. The BANK DOWN switch is connected to ring and sleeve. In the Instant Access Mode, the BANK UP switch stores the edit and exit from Instant Access Mode. For the other side, the BANK DOWN switch exits from Instant Access Mode without storing the edit. 9.2 XPDL XPDL & Volume Pedal The cable required is a stereo (TRS) to two mono 1/4" phone plugs. Connect the tip(stereo plug) to the pedal input, ring to the pedal output and sleeve to ground on all 3 plugs. XPDL & Expression Pedal The cable required is a stereo (TRS) to a stereo (TRS) 1/4" phone plugs. EFX LITE 62M Audio Controller Owner's Manual 31 9.3 Functions Switches The cable required is a stereo (TRS) to two mono 1/4" phone plugs. Connect the tip(stereo plug) to the pedal input, ring to the pedal output and sleeve to ground on all 3 plugs. 2 Funtion Switches 4 Funtion Switches EFX LITE 62M Audio Controller Owner's Manual 32 10. Connection Examples Standard Connection CHANNEL / REVERB AMP VOLUME PEDAL OD BOOST EFX LITE 62M COMP DIST CHORUS DELAY TUNER GUITAR BUFFER COMP OD DIST BOOST VOLUME PEDAL CHORUS DELAY AMP Standard Connection with Fuzz CHANNEL / REVERB OD AMP BOOST EFX LITE 62M COMP DIST FUZZ DELAY TUNER GUITAR FUZZ BUFFER COMP EFX LITE 62M Audio Controller Owner's Manual OD DIST BOOST DELAY AMP 33 Stereo Connection AMP1 VOLUME PEDAL OD AMP2 BOOST EFX LITE 62M COMP DIST STEREO DELAY TUNER AMP2 GUITAR BUFFER COMP OD DIST VOLUME PEDAL BOOST DELAY AMP1 Stereo Connection via MIDI PC & CC AMP1 CHORUS DELAY REVERB AMP2 OD BOOST EFX LITE 62M DIST COMP PHASE TREM TUNER AMP2 GUITAR BUFFER COMP OD DIST BOOST EFX LITE 62M Audio Controller Owner's Manual PHASE TREM CHORUS DELAY REVERB AMP1 34 4 Pedals in front of an amp, 2 in FX loop CHANNEL / REVERB AMP SEND RETURN OD BOOST EFX LITE 62M COMP DIST DELAY REVERB TUNER GUITAR BUFFER COMP OD EFX LITE 62M Audio Controller Owner's Manual DIST BOOST PRE AMP DELAY REVERB POWER AMP 35
