Download Reverse Cycle Split, Window & Portable air conditioners

Reverse Cycle Split, Window
& Portable air conditioners
Maximum flexibility with minimum cost.
Reverse Cycle Split Systems
DC Inverter & Fixed Speed
Advanced Technology
Active Carbon
and Dust Filter
Made of Active Carbon and
Electrostatic Fibre, this filter aids in
eliminating certain kinds of odours
such as ammonia (NH3) and aids in
deactivating harmful chemical gases
such as formaldehyde (HCHO). By
forming positive positions on the filter
surface, the Electrostatic Fibre Filter
traps small dust particles, smoke and
pet fur to further aid in preventing
allergic reactions.
Rotary Compressor
Rotary Compressors reduce both
noise and vibration. Midea air
conditioners use both Single Rotary
and Twin Rotary compressors
depending on the model.
Bio Filter
A specialized biological enzyme and
Eco filter. The Eco filter catches very
small airborne dust particles and aids
in neutralising bacteria, fungi and
microbes. Biological enzyme acts
on bacteria by dissolving their cell
wall thus reducing the problem of
re-pollution seen in air conditioners
without such filtration.
Louvre Position
Memory Function
When starting the unit again after
shutting down, the louvre will restore
to the angle originally set by the user.
Whilst the main effect is to reduce the
performance of your unit, too much
reduction in the volume of refrigerant
could damage the compressor.
Midea splits will display an “EC”
indicator on the indoor unit so that you
can get your unit inspected before any
damage is done.
2
*Applies to all models.
LCD Display
The LCD display shows the current
temperature setting at a glance
(on/off selectable).
Demand Response
Function
The condensers for all Inverter models
apart from the DMORC28 have
D.R.E.D. (also known as Peak Smart
Compatible) connection to outdoor.
Refrigerant leakage
detection
Because of the very nature of the
installation of Split air conditioners it
is possible that a unit may develop a
refrigerant leak.
Left or right drainage take off points*.
COMMON DRM3
DRM2 DRM1
Gold Fin Protection
This corrosion resistant material on
the condenser fins enhances and
prolongs the heat exchange capacity
of the outdoor unit, extending the
working life of your air conditioner.
Turbo Mode
Helps the unit reach the preset
temperature in the shortest time.
Auto Restart
SSS Service System
Energy Efficient
Should the power go off, the unit will
automatically restore the previous
function setting as soon as it comes
on again.
The SSS system is a designated
help line (1300 726 002) which
saves you having to organise servicing
through the original reseller or find
an appointed service repairer.
The help line takes your purchase
details and establishes the problem,
then contacts an appointed service
centre and arranges for the work
to be done.
Energy efficiency is a priority,
continually improving in line with
Australian Government M.E.P.S.
standards. Standby power has been
reduced to only 20% of previous
models by the use of intelligent
On/Off technology.
Sleep Mode
This function enables the air
conditioner to automatically increase
(in cooling mode) or decrease (in
heating mode) 1˚C per hour for the
first two hours, then hold steady for
the next five hours. After that it will
revert to the original setting. This
maintains comfort during the night as
well as saving energy.
Service Valve
Protection Cover
Hot Start
On startup, the fan only operates after
the indoor coil is heated to avoid a
cold air draft.
Remote Control
Comfort is always at hand with your user-friendly remote control.
Protection covers prevent condensate
water dripping off the service valves
when units are installed overhead.
Built-In Electronic
Diagnostics
Midea air conditioners are very easy
to service because the technician can
see at a glance where the problem is
likely to be.
Quicker problem diagnosis helps
reduce labour costs.
5 Year Residential
Warranty*
A five year warranty provides further
peace of mind. Ensure that your
installer is qualified and licensed to
avoid risking your warranty.
*Some exclusions apply.
(Actual remote control may differ from unit shown)
3
DC Inverter Split System Reverse Cycle
Self Cleaning
When this function is activated, the indoor unit firstly operates
in cooling mode with low fan speed. During this period
condensed water removes dust from evaporator fins. The
unit then turns to heating operation with low fan speed to dry
interior of indoor unit. Finally it turns to fan only mode and
blows away the wet air. The whole process cleans the interior
of the indoor unit and aids in preventing breeding of bacteria.
13
Alps
DMORC28 - 8.15kw cooling / 9.3kw heating
Follow Me / I Feel
Series
With this technology, a temperature sensor is built into
the remote control. When activated, the unit automatically
changes the operation mode to supply accurate
temperature based on where the remote control is located.
Features
altal& &
Auto
Auto
Plasma
asma
New Zealand
4
AutoMe
Restart
Follow
Me
Follow
Function
Cold Catalyst
TurboMode
Mode
Turbo
Filter
Horizontal &
SleepMode
Mode
Sleep
Vertical Auto
Swing
TempFin
Golden
Fin
Golden
Compensation
® ®
Self-cleaning
ENERGY
STAR
ENERGY
STAR
Super
Timer Plasma
Timer
ENERGY
STAR
ENERGY
STAR
FMV09DR
FMV12DR
FMV18DR
Follow
Me
FMV24DR
-
2.45kw cooling / 2.6kw heating
3.5kw cooling / 3.7kw heating
5.0kw cooling / 5.3kw heating
6.7kw cooling
/ 6.7kw heating
Turbo Mode
Sleep Mode
Golden Fin
ENERGY STAR®
ENERGY STAR
Timer
Specifications
MODEL
FMV09DR
FMV12DR
FMV18DR
FMV24DR
DMORC28
Ph-V-Hz
220-240V~ 50Hz, 1Ph
220-240V~ 50Hz, 1Ph
220-240V~ 50Hz, 1Ph
220-240V~ 50Hz, 1Ph
220-240V~ 50Hz, 1Ph
TO
OUTDOOR
OUTDOOR
OUTDOOR
OUTDOOR
OUTDOOR
W
2450(1350-2700)
3500(1700-3700)
5000(2750-5200)
6700(3700-7000)
8150(3300-9000)
Power Supply
Capacity
Input
W
660(340-820)
Cooling
Rated Current
AEER (Part Load)
A
ta
ene g
e
e
t ee
3.4(1.7-4.2)
ing
w/w
W
e
i
3.67
ta
ene g
ing
Capacity
H
e
e
t ee
e
i
ient
ing ing
ient
ing ing
ta
ene g
ing
e
e
t ee
e
i
ient
W
680(340-850)
Rated Current
A
3.5(1.7-4.3)
1580(790-1790)
ee ee
tata
t te ee e
ene
ene g g e e i i ient
ient
4.7(2.0-5.5)
inging
e ee e
ta ta
t ete e e
eneeneg g e e i iientient
ing ing
(3.73)
e ee e
ta ta
t etee e
ient
eneeneg g e e i iient
ee ee
tata
t te ee e
ene g g e e i i ient
ient
ene
ing ing
g in
e ee e
ta ta
t et ee e
ene g g e e i i ient
ient
ene
eeee
tata
t et ee e
ene
ene g g e e i i ient
ient
ing ing
7.2(3.6-8.2)
inging
(3.30)
g in ing
ing
ACOP (Part Load)
w/w
e
e
e
t ee
e
i
e
e
t ee
e
ient
ee t t
Heating
3.77
ing
ing
Heating
ta
ating ea e e t t
eating
ta
t
tHeatinge g i e
e
e
t ee
e
i
ient
ient
a e teting
ta
ating an
ing inga
t
e
Heating
ing
Heating
e
t ee
e
i
ient
a t get e a e tet ina
an
a
eating int eta et ante ating
ai n aniti ne
ing inga
gt
ating
a e
ene
Cooling
t e g i e
t
e
ating
ene
e
3.77
ing
Heating
ta
ene g
e
e
t ee
e
i
ta
ene g
Heating
ient
ing
t get e
ina
an
a
int e et ante ai n iti ne
ating
a e
g
ta
ene g
e
Heating
Cooling
Heating
Heating (CEC/MEPS)
Heating
Heating
Cooling
Moisture Removal
3.0
3.0
Heating
Heating
Heating
Heating
Heating
Heating
Cooling
Cooling
Heating
Heating
Heating
Cooling
Heating
1.0
Cooling
Heating
2.5
3.5
Heating
Heating
Heating
Heating
Heating
Heating
Heating
Cooling
Cooling
Heating
Heating
Heating
ta
ene g
e
e
t ee
e
2.0
Heating
Heating
Cooling
Heating
Heating
Heating
Heating
Cooling
ing
ating
3.0
Heating
e
Heating
Heating
Heating
Heating
2370(830-2900)
ta
ene g
ing
ing
ing
g in
g in
ing
e
e
t ee
e
i
ient
10.8(4.0-14)
e e
tata e t ete ee e
ene
ene g g e e i i ient
ient
e e
ta
t ee
ene g e
i ient
e e
tata e t ete ee e
ene
ene g g e e i i ient
ient
g
i
e
ta
ene g
e
e
t ee
e
e e
tata e tet eeee
ene
i i ient
ene gg ee
ient
ing
ing
ta
ene g
ene
ient
e
t ee
e
i
ient
9300(4200-10000)
ta
ene g
g in
e
e
t ee
e
i
ient
e
e
t ee
e
i
2700(940-3230)
ing
ta
ene g
e
e
t ee
e
i
ient
12.4(4.5-15.6)
ient
t get e
ina
an
a
int e et ante ai n iti ne
ating
a e
(3.38)
g
Heating
i
ta
ene g
ta
ene g
9.5(4.8-11.0)
ing
Heating
Heating
a e teing
t
ta
ating an
ing inga
t
e
e
3.43
ing
ta
ene g
e
e
t ee
e
i
3.43
ient
ing
Heating
t get ea e tet ina
an
a
a
ai n an iti ne
eating int eta et ante ating
ene Heating
ating
a e
tg
ing inga
eneHeatingg
Heating
Heating
Cooling
t e g i e
t
e
ating
1.5
Heating
Heating
Heating
Cooling
2.0
Heating
Heating
Heating
Cooling
ta
ene g
e
e
t ee
e
i
ient
t get e
ina
an
a
int e et ante ai n iti ne
ating
a e
Cooling
Heating
Cooling
2.4
Heating
Cooling
Heating
Heating
Heating
H
ee ee
tata
tt eeee
ene
i i ient
ene gg ee
ient
e e
t ee
e
i ient
ing
ing
ing
a e tet
ating an
ing inga
t
e
ta
ating e a e e t t
eating
ta
t
Heating
tHeatinge g i e
Cooling
Heating
Heating
ient
6700(3700-7000)
ing
Heating
a
eating
Heating
ing
ta
i
(3.73)
ing
Cooling
Cooling
ient
e
t ee
e
e e
tata e tet eeee
ene
i i ient
ene gg ee
ient
e e
ta
t ee
ene g e
i ient
ing
ing
Heating
t
t
i
ing
Cooling
ta
e
9.6(4.8-11.1)
ee ee
tata
t teeee
ene
i i ient
ene g g ee
ient
ing
ing
ient
ta
ene g
2090(1050-2410)
ient
ing
H
1.8
Heating
Heating
Cooling
i
ee t t
1.2
Heating
Heating
Heating
Heating
Cooling
Cooling
Cooling
Cooling
L/hr
Heating
Heating
e
t ee
e
e
t ee
e
i
3.53
Cooling
e
Heating
e
e
ee t t
ing
Cooling (CEC/MEPS)
ient
ta
ene g
ing
7.0(3.4-7.9)
ing
Heating
Cooling
Energy
Rating
i
e e
tata e tete ee e
ene
ene g g e e i i ient
ient
e e
t ee
e
i ient
ing
ing
ta
ene g
ing
e
t ee
e
1490(750-1720)
4.7(2.2-5.8)
ta
ene g
ing
e e
ta
t ee
ene g e
i ient
e e
t ee
e
i ient
ing
i
970(450-1180)
ta
ene g
ing
ing
e
e e
tata e teteeee
ene
i i ient
ene g g ee
ient
e e
ta
t ee
ene g e
i ient
5300(2900-5800)
ta
ene g
ing
Heating
ta
ene g
ta
ene g
ing
e
t ee
e
i
ta
ene g
ient
ee ee
tata
t te ee e
ene g g e e i i ient
ient
ene
ing
e ee e
ta ta
t ete e e
eneeneg g e e i iientient
ing
2120(1060-2460)
ee ee
tata
t te e e
ene g g e e i i ient
ient
ene
e
3700(1900-4000)
ing ing
Input
960(410-1120)
e ee e
ta ta
t et ee e
ene
ene g g e e i i ient
ient
2600(1430-2900)
H
H
2.0
2.5
Heating
Heating
Heating
Heating
Heating
Heating
2600
Cooling
2000
2100
Max Current
A
9.5
10.0
12.5
13.5
15
Starting Current
A
2.0
2.0
2.0
2.5
3.0
ROTARY
ROTARY
ROTARY
TWIN ROTARY
TWIN ROTARY
Compressor Type
2800
Heating
Heating
W
Heating
Heating
Heating
3.0
Heating
Max Input Consumption
Heating
Cooling
Heating
Heating
3500
Heating
Indoor Air Flow (H/M/L)
L/Sec
169/141/113
227/172/133
305/277/230
319/291/238
403/386/356/242/208
Indoor Noise Level (H/M/L)
dB(A)
38/34/29
41/32/27
48/45/37
46/43/37
53/51/45/36/34
Indoor Unit Dimension (WxDxH)
mm
800x188x275
940x205x275
1045x235x315
1045x235x315
1186x258x343
Indoor Unit Weight (Net/Gross)
Kg
7.5 / 9.5
10 / 13
12.5 / 16
12.5 / 15.5
17.5 / 22.5
Outdoor Noise Level
(Sound Pressure)
dB(A)
54
54
56
61
61
Outdoor Noise Level
(Sound Power)
dB(A)
62
62
65
70
70
Outdoor Unit Dimension (WxDxH)
mm
760x285x590
760x285x590
845x320x700
900x315x860
945x395x810
Outdoor Unit Weight (Net/Gross)
Kg
34 / 37
34 / 37
39.2/42.6
59 / 63
62.1 / 66.6
g
1070g
1070g
1750g
2200g
2550g
Precharged
for (m)
5
5
5
5
5
Liquid Side/Gas
mm
6.35/9.52
(1/4”/3/8”)
6.35/12.7
(1/4”/1/2”)
6.35/12.7
(1/4”/1/2”)
9.52/15.9
(3/8”/5/8”)
9.52/15.9
(3/8”/5/8”)
Max Pipe Length
m
25
25
30
30
50
Min Pipe Length
m
3
3
3
3
3
Difference in Level
m
10
10
20
20
25
°C
0~50/-15~30
0~50/-15~30
0~50/-15~30
0~50/-15~30
-15~50/-15~30
Refrigerant Type R410A
Refrigerant
Piping
Ambient Temperature
(Cooling/Heating)
Specifications based on Testing conditions as specified in AS/NZ3823 1.1.1998. Cooling: Indoor DB 27°C WB 19°C, Outdoor DB 35°C WB 24°C. Heating: Indoor DB 20°C, Outdoor DB 7°C. Star Rating,
Comparative Energy Consumption (CEC) and Minimum Energy Performance Standards (MEPS) conform to AS/NZS3823.2 (2013) *Output Capacity is reduced once ambient temperature is >35°C℃ or <7°C.
Design and specifications are subject to change E&OE
5
Fixed Speed Split Systems
13
Self Cleaning
New Zealand
Alps
When this function is activated, the indoor unit firstly
operates in cooling mode with low fan speed. During
this period condensed water removes dust from
evaporator fins. The unit then turns to heating operation
with low fan speed to dry interior of indoor unit. Finally
it turns to fanonly mode and blows away the wet air.
The whole process cleans the interior of the indoor
unit and aids in preventing breeding of bacteria.
Series
MEF09
MEF12
MEF18
MEF24
–
–
–
–
2.7kw
3.5kw
5.1kw
6.4kw
cooling
cooling
cooling
cooling
/
/
/
/
2.8kw
3.5kw
5.3kw
7.0kw
heating
heating
heating
heating
Features
Follow Me / I Feel
tal &
Auto
Plasma
o Mode
Auto Restart
Follow
Me
Function
Cold Catalyst
Turbo Mode
Filter
Horizontal &
Sleep Mode
Vertical Auto
Swing
Temp Fin
Golden
Sleep Mode
Compensation
Self-cleaning
ENERGY
STAR®
Super
Timer Plasma
ENERGY STAR
Follow Me
Turbo Modesensor is built
Sleep Mode
With this technology, a temperature
into the remote control. When activated, the unit
automatically changes the operation mode to supply
accurate
temperature
based
on where
Golden
Fin
Timer
ENERGY
STAR®the remote
control is located.
ENERGY STAR
ectional
RGY
STAR®
Self Diagnostic
Multi-Bend
Timer
Function
Evaporator
Anti-Cold-Air
LED
Display
Two-directional
5 Year
Airflow
Warranty
Multi-Bend
Evaporator
LED Display
5 Year
Warranty
rotection
Display
Louver Position
Anti-Rust
5 Year
Memory
Cabinet
Warranty
Function
Quiet
Design
Independent
Dehumidifica tion
Valve
Quick Protection
and Easy
Cover
Installation
Anti-Rust
Cabinet
Quiet Design
Quick and Easy
Installation
Design
6
Quick and Easy
Installation
Specifications
MODEL
MEF09
MEF12
MEF18
MEF24
Ph-V-Hz
220-240V~ 50Hz, 1Ph
220-240V~ 50Hz, 1Ph
220-240V~ 50Hz, 1Ph
220-240V~ 50Hz, 1Ph
TO
INDOOR
INDOOR
INDOOR
OUTDOOR
Capacity
W
2700
3500
5100
6400
Input
W
720
1550
1940
Rated Current
A
Power Supply
940
H
H
Cooling
AEER
3.3
ta
ene g
ing
w/w
W
Input
W
Rated Current
A
e
t ee
e
i
ient
ing
ta
ene g
e
e
t ee
e
i
ient
i
ient
i
ient
ing
ing
ing
ing
ing
ing
3.72
ta
ene g
ing
Capacity
e
e
e
t ee
e
i
4.3
e ee e
ta
ta t e e t e e
ene ene
g eg ei ienti ient
3.70
ient
ing
ta
ene g
e
e
t ee
e
e e
ta
t ee
ene g e
i
ing
e ee e
ta t e e t e e
ta
ene ene
g e g ei ienti ient
2800
ta
ene g
e
e
t ee
e
ient
i
ient
3.80
ing
ing
ta
ene g
e
e
t ee
e
ing
ACOP
w/w
e
e
t ee
e
ta
ene g
ing
Heating ing
Heating
ta
ating
a
eating
ta
t
t Heatinge g i e
a e tet
ating an
ing inga
t
e
ene
Heating
Energy Rating
Cooling
Heating (CEC/MEPS)
Heating
Heating
Moisture Removal
L/hr
Heating
W
e e e e
ta
ta t e e t e e
ene gene e g ie ienti ient
H
e e
ta
t ee
ene g e
i
ing
e e e e
ta t e e t e e
ta
ene gene e g ie ienti ient
3.0
3.0
1.0
Cooling
Heating
Heating
ta
ene g
Heating
Heating
Cooling Cooling Heating
Heating Heating
Heating Heating
Heating Heating
e
1020
ta
ene g
ing
ing
i
ient
ta
ene g
ing
e ee e
ta ta t e e t e e
ene ene
g eg ei ient
i ient
e e
ing
ta
ene g
ing
ient
ing
e
t ee
i
ient
ing
ing
e
e
t ee
e
i
8.9
H
ient
3.29
e e e e
ta
ta t e e t e e
ene ene
g e g ei ienti ient
e e
t ee
e
i ient
ta
ene g
ing
e
e
t ee
e
i
i
ing
ating
t
t
a
eating
e
ee t t
3.0
ing
3.0
Heating
1.2
i
e
ene
ta
ating
Heating
Heating
Heating Cooling
t
t
Heating
Heating
CoolingHeating
Heating
e
Heating
g
ta
i
e
a e tet
ating an
ing inga
t
e
e
t ee
e
i
ta
ene g
ing
ta
ene g
ing
e
e
t ee
e
i
ient
ta
ene g
Heating
ene
g
Cooling Cooling Heating
Heating
Heating
Heating
2.0
2.0
Heating
Heating
Cooling
ating
a
eating
t
t
Cooling Heating
Heating
ing
Heating
e
Heating
g
ta
i
e
a e tet
ating an
ing inga
t
e
HeatingHeating
Heating
Heating
Heating
Heating Heating
e
t ee
e
i
ient
e
e
t ee
e
i
ene
ta
ene g
e
e
t ee
e
g
Cooling
i
e
t ee
e
i
ient
g in
ta
ene g
e
e
t ee
e
i
ient
ient
Heating
Heating Cooling
Cooling
Cooling
Heating Heating
Heating
Heating
Heating
Heating
Heating
2.0
2.0
Cooling
Heating
Heating
2.4
1900
Cooling
Heating
2400
A
4.5
6.0
9.7
12.4
Starting Current
A
22
30
34
32
ROTARY
ROTARY
ROTARY
ROTARY
Indoor Air Flow (H/M/L)
L/Sec
175/152/116
227/194/169
305/286/233
319/288/236
Indoor Noise Level (H/M/L)
dB(A)
41/35/29
44/39/35
46/42/38
48/44/38
Indoor Unit Dimension (WxDxH)
mm
800x188x275
940x205x275
1045x235x315
1045x235x315
Indoor Unit Weight (Net/Gross)
Kg
7.5/9.7
9.6/12.9
12.7/16.2
12.4/15
Outdoor Noise Level (Sound Pressure)
dB(A)
56
58
62
62
Outdoor Noise Level (Sound Power)
dB(A)
65
67
71
71
Outdoor Unit Dimension (WxDxH)
mm
780x250x540
780x250x540
845x320x700
900x315x860
Outdoor Unit Weight (Net/Gross)
Kg
28.4/30.8
32.4/34.8
46.8/50
60.5/65.3
g
1030g
1280g
1900g
2000g
Pre-charged
for (m)
5
5
5
5
Liquid Side/Gas
mm
6.35/ 9.52 (1/4”/3/8”)
6.35/ 12.7 (1/4”/1/2”)
6.35/ 12.7 (1/4”/1/2”)
9.52/ 15.9 (3/8”/5/8”)
Max Pipe Length
m
25
25
30
30
Min Pipe Length
m
3
3
3
3
Difference in Level
m
10
10
20
20
°C
18~43/-7~24
18~43/-7~24
18~43/-7~24
18~43/-7~24
Refrigerant Type R410A
e
ient
Max Current
Compressor Type
ta
ene g
t get e
ina
an
a
int e et ante ai n iti ne
ating
a e
1.8
Heating
Heating
ing
3.29
Heating
et e get
tt e
ing
ina
an
ata
int e et ante ai n iti ne
Heating
ating
a e
Heating Heating
Cooling Cooling
e
9.7
ing
Cooling
e ee e
ta ta t e e t e e
i ient
ene ene
g eg ei ient
e
ient
ient
3.30
Cooling
Cooling
Heating
e
i
2120
7.3
ing
Heating ing
a
eating
e ee e
ta t e e t e e
ta
ene ene
g e g ei ienti ient
t get e
ina
an
a
int e et ante ai n iti ne
ating
a e
g
Heating
1320
Heating
a e tet
ating an
ing inga
t
e
ta
g
ing
e ee e
ta ta t e e t e e
i ient
ene ene
g eg ei ient
ing
ta
ene g
ing
Heating
ient
g in
1600
ient
e
t ee
e
7000
e ee e
ta t e e t e e
ta
ene ene
g eg ei ienti ient
e e
t ee
e
i ient
ing
e
ta
ene g
g in
ta
ene g
ing
Heating
Cooling Heating
e
t ee
e
e
t ee
e
3.28
ient
ta
ene g
ient
3.70
Cooling Heating
Cooling
Heating
i
e e
ta
t ee
ene g e
i
e e
t ee
e
i ient
ing
ing
e te e get
tt e
ing
ina
an
ata
int e et ante ai n iti ne
ating
a e
g
e
Heating
e
t ee
e
7.1
e
ta
ene g
ing
5300
ient
Heating
Heating
Max Input Consumption
ing
e ee e
ta ta t e e t e e
i ient
ene ene
g eg ei ient
ing
Cooling (CEC/MEPS)
e
4.3
ing
ee t t
Heating
g in
940
3.3
e
ient
e e
ta
t ee
ene g e
i
ing
e ee e
ta t e e t e e
ta
ene ene
g eg ei ienti ient
Heating
ta
ene g
ing
3500
i
730
ing
ing
Refrigerant Piping
Ambient Temperature (Cooling/Heating)
Specifications based on Testing conditions as specified in AS/NZ3823 1.1.1998. Cooling: Indoor DB 27°C WB 19°C, Outdoor DB 35°C WB 24°C. Heating: Indoor DB 20°C, Outdoor DB 7°C. Star Rating,
Comparative Energy Consumption (CEC) and Minimum Energy Performance Standards (MEPS) conform to AS/NZS3823.2 (2013) *Output Capacity is reduced once ambient temperature is >35°C℃ or <7°C.
Design and specifications are subject to change E&OE
7
Window/Wall Air Conditioners
Sliding Chassis
The casing slides out easily to allow
simple installation and servicing.
Slinger-up System
All refrigerated air conditioners
develop condensate water when in
cooling mode. Midea Window/ Wall
units use a “slinger” fan to agitate
this condensate onto the condenser
to increase the efficiency of the unit.
This means that the bulk of the
condensate is used up; reducing
the need to drain the unit.*
Remote Control
Rotary Compressor
Your easy to operate
remote control* puts
comfort at your fingertips.
The rotary compressor reduces noise
and vibration.
Removable Panel
Gold Fin Condenser
The Golden hydrophilic condenser
improves the heating efficiency in
Reverse Cycle models by accelerating
the defrosting process. The special
anti-corrosive golden coating on the
condenser also aids in withstanding
the effects of salty air, rain and other
corrosive elements by allowing
contaminated water on the coil to run
off more quickly reducing the corrosive
effect to the coil. Heat exchange
performance is much longer lasting.
The front panel is easily removed for
periodic cleaning.
Fresh Air Switch
Pressing the “Fresh Air” button
draws in fresh air from outside, as air
pressure expels air from inside.
Dual Drainage
Alternative drainage points provide
versatility for different drainage
situations.
Automatic Left
to Right Airflow
Gives even air distribution.
5 Year Warranty
A five year warranty provides further
peace of mind.**
8
SSS Service System
The SSS system is a designated
help line (1300 726 002) which saves
you having to organise servicing
through the original reseller or find an
appointed service repairer. After taking
your purchase details and establishing
the problem, the help line will contact
an appointed service centre for you
and arrange for the work to be done.
*There will always be situations of high humidity where the
condensate produced may have to be drained away. **Some
exclusions apply.
Specifications
COOLING ONLY
MODEL
MWF05CB4
MWF07CB4
MWF09CB4
MWF12CB4
MWF07HB4
MWF09HB4
MWF12HB4
MWF18HB4
V-HzPh
220-240V~50Hz
1Ph
220-240V~50Hz
1Ph
220-240V~50Hz
1Ph
220-240V~50Hz
1Ph
220-240V~50Hz
1Ph
220-240V~50Hz
1Ph
220-240V~50Hz
1Ph
220-240V~50Hz
1Ph
Capacity
W
1600
2130
2600
3600
2230
2600
3500
5500
Input
W
500
640
790
1090
660
790
1050
1730
Rated
current
A
2.4
2.9
3.6
5.0
3.0
3.6
4.8
7.7
W/W
3.19
3.32
3.28
3.30
3.37
3.28
3.33
3.17
Capacity
W
–
–
–
–
1970
2350
3200
Input
W
–
–
–
–
580
700
960
Power supply
Cooling
HEATING & COOLING
AEER
ta
ene g
ing
ta
ene g
ing
Heating
Rated
current
A
–
–
–
–
2.7
3.2
4.4
ta
ene g
ing
ACOP
W/W
–
–
–
–
3.39
3.35
Star
Rating
Cooling
Heating
Heating
Heating
Cooling
Heating
L/h
Cooling
Cooling
2.0
Heating
0.7
Cooling
Cooling
Heating
Cooling
Cooling
Cooling
Cooling
Heating
Heating
Heating
Cooling
Heating
–
Heating
Heating
Cooling
Cooling
Cooling
Heating
Heating
Cooling
1.5
–
Cooling
Heating
Moisture Removal
Cooling
0.8
Heating
Cooling
–
Heating
Heating
Heating
Cooling
2.0
1.0
Cooling
Heating
Heating
Cooling
Heating
Cooling
Cooling
Cooling
Heating
–
Heating
Cooling
Heating
Heating
Cooling
2.0
Cooling
Heating
1.2
Heating
Heating
Cooling
Cooling
Cooling
Heating
Heating
Heating
Cooling
Cooling
Cooling
Cooling
Cooling
Heating
Heating
Heating
Cooling
2.0
Cooling
Heating
2.0
Cooling
Heating
0.8
Heating
Cooling
Heating
Heating
Cooling
Cooling
Cooling
Cooling
Heating
Cooling
Heating
Heating
Heating
Heating
Cooling
Heating
Heating
Cooling
Cooling
Cooling
2.0
e
t ee
e
e
e
t ee
e
ient
i
ient
i
ient
ta
ene g
Cooling
Cooling
Heating
2.0
ta
ene g
Cooling
Heating
Cooling
Heating
1.0
Heating
Cooling
Heating
Cooling
e
t ee
e
i
ient
i
ient
ing
ing
ta
ene g
ta
ene g
e
e
t ee
e
ing
ta
ene g
e
e
t ee
e
e
e
t ee
e
e
e
t ee
e
i
ient
i
ient
i
ient
ing
ing
3.19
e
e
t ee
e
i
ee t t
2.0
Heating
Heating
e
ient
Heating
ta
ene g
e
i
6.5
ta
ene g
ing
ient
ing
Heating
ta
Cooling
Cooling
Heating
Heating
Cooling
2.0
e
t ee
e
1470
ing
Heating
Cooling
Cooling
Cooling
Heating
e
4700
ing
Heating
ing
Heating
e
i
3.33
Heating
Heating
e
t ee
e
Heating
Heating
Heating
e
H
1.2
Heating
a
eating
ta
tHeating
t e g i e
Heating
Cooling
Heating
ing
Heating
1.5
ating
Heating
Heating
a e tet
ating an
ing inga
t
e
1.5
1.8
Max. input
consumption
W
650
850
1100
1600
850
1100
1600
Max. current
A
3.0
3.8
5.0
6.8
3.8
5.0
6.8
12.5
Starting current
A
11
15
16
20.1
15
16
25.1
36
Plug type
A
10
10
10
10
10
10
10
15
Control Type
Remote
Remote
Remote
Remote
Remote
Remote
Remote
Remote
Compressor Type
Rotary
Rotary
Rotary
Rotary
Rotary
Rotary
Rotary
Rotary
Heating
Heating
ene
2450
Indoor air flow
(Hi/Mi/Lo)
L/Sec
108/95/84
105/95/86
127/113/100
197/180/158
105/95/86
127/113/100
197/180/158
227/200/175
Indoor noise level
(Hi/Mi/Lo)
dB(A)
49/46/43
51/48/45
51/48/45
53/50/47
51/48/45
51/48/45
54/51/48
59/56/53
Outdoor noise level
(Sound pressure)
dB(A)
58/54/51
58/55/52
58/55/52
58/56/53
58/55/52
58/55/52
58/56/53
66/62/59
Outdoor noise level
(Sound power)
dB(A)
66
66
67
67
66
67
68
74
Refrigerant type
g
R410A/325g
R410A/430g
R410A/480g
R410A/670g
R410A/530g
R410A/755g
R410A/870g
R410A/1280g
Operation temp
°C
17-32
17-32
17-32
17-32
17-32/0-27
17-32/0-27
17-32/0-27
17-32/0-27
Ambient temp
(cooling/heating)
°C
18-43/---
18-43/---
18-43/---
18-43/---
18-43/-5-24
18-43/-5-24
18-43/-5-24
18-43/-5-24
Dimension (W*D*H)
mm
450x535x346
600x560x380
600x560x380
660x680x428
600x560x380
600x560x380
660x680x428
660x780x428
Weight (net/Gross)
Kg
25/27
35/39
36/40
46/50
34/38
36/40
47/51
63/72
g
ta
ene g
e
e
t ee
e
i
ient
t get e
ina
an
a
int e et ante ai n iti ne
ating
a e
Heating
He
Heating
He
Heating
Specifications based on Testing conditions as specified in AS/NZ3823 1.1.1998. Cooling: Indoor DB 27°C WB 19°C, Outdoor DB 35°C WB 24°C. Heating: Indoor DB 20°C, Outdoor DB 7°C. Star Rating, Comparative
Energy Consumption (CEC) and Minimum Energy Performance Standards (MEPS) conform to AS/NZS3823.2 (2013) *Output Capacity is reduced once ambient temperature is >35°C°C or <7°C. Design and
specifications are subject to change E&OE
9
Reverse Cycle Portable
The new MPPD12 model has a cooling capacity of
3.5kW making it perfect for use in bedrooms or spot cooling
in larger areas. As it is true reverse cycle it is much more
energy efficient than portables that use an element for
their heating.
The unit comes with an exhaust hose with fittings to
either connect permanently to an outside wall or to a
sliding window.
MODEL
MPPD12HRN1
Power supply
Ph-V-Hz
1Ph, 220-240V~, 50Hz
Capacity
W
3500
Input
W
1350
Rated current
A
5.9
W/W
2.6
Capacity
W
2900
Input
W
1130
Rated current
A
5.0
W/W
2.6
L/h
1.2
Max. input consumption
W
1600
Max. current
A
8
Starting current
A
21
Cooling
The MPPD12 uses a ‘slinger’ fan to agitate the condensate
water onto the condenser, which increases the efficiency
of the unit and reduces the need for draining.* It also
comes with a 2 Year Warranty for Residential Use.**
EER
Heating
Standard Features
COP
Auto Restart
AutoAuto
Restart
Restart
Function
Function
Function
Swing
Auto Swing
AutoAuto
Swing
Omni-directional
Omni-directional
Omni-directional
Moisture Removal
Castor Castor
Castor
FlexibleFlexible
Flexible
Installation
Installation
Kit
Installation
Kit Kit
No Bucket
No Bucket
No Bucket
Design
Design Design
Washable
Filter
Washable
Filter
Washable
Filter
Self Diagnostic
SelfSelf
Diagnostic
Diagnostic
Function
Function
Function
Timer Timer
Timer
Sleep Mode
Sleep
Mode
Sleep
Mode
Control type
*In high humidity situations where excess condensate has to be drained away the unit has an alarm
and warning light to indicate that the tank needs to be drained. **This warranty is a carry in warranty
to nearest service centre.
10
Remote Control
Compressor type
ROTARY
Refrigerant type
R410A/550g
Indoor air flow (Hi/Mi/Lo)
L/Sec
102/89/78
Indoor sound pressure (Hi/Mi/Lo)
dB(A)
52/48/45
Dimension (W*D*H)
mm
467x397x765
Packing (W*D*H)
mm
517x437x870
Net/Gross weight
Kg
34/37.5
Ambient temp
°C
17~35/5~30
Feeling comfortable with Midea
Making you feel comfortable is what air conditioning is all
about. And naturally you want to be certain that the brand
you’re considering is every bit as good, and preferably
better, than others on the market. So here are a few
things you should know about Midea.
Although relatively new in Australia, Midea actually makes
more air conditioners than just about anyone you can
think of. In fact over 20% of all the air conditioners in the
world come out of our factories.
We export more of them than anyone else in the world.
Selling over 30 million units a year, in over 150 countries.
In Australia, we offer the largest range of air conditioning
systems comprising inverter and fixed speed split
systems, window, portable, ducted, multi-head and
commercial systems, including VRF products.
So when you choose a Midea air conditioner, you’re
choosing the most up to date and reliable technologies
available. Doesn’t that make you feel more comfortable?
11
Midea sells more than 30 million air conditioning units a year, in over 150 countries around the
world, making it the largest air conditioning exporter in the world. The company has over 40,000
employees producing state-of-the-art inverter and fixed speed split systems, window, portable,
ducted, multi-head and a comprehensive range of commercial systems, including VRF products.
Midea has its headquarters in Guandong Province China, which covers over one million square
metres (pictured above). The company maintains over 85 testing centres, employs over 1,000
engineers and manufactures over 1,000 different products.
Because Midea is the world’s largest exporter you can be absolutely confident you are choosing
the most up to date and reliable technology available - that should make you feel comfortable.
CE0012 06/15
Distributed by
48A Radford Road, Reservoir, Vic. 3073. Tel: (03) 9495 2899