Download Incowin User Manual

Transcript
Main Window
Fig. 7-4: Isometry views
Other setting possibilities for isometry
The setting window offers the following options for adapting the displays in the result window:
Tilt angle
The tilt angle can be specified in the setting window for all 3D models
(with the exception of roll-off).
Rotation angle
The rotation angle can be specified for all displays in the setting window which are not rolled off.
Alternatively, you can tilt or rotate the graphic with the aid of the interactive mouse control until the tilt or rotation angle is reached (=> subsection Using the Setting Window , page 72).
421H
74
42H
V-INCOMETER with INCOWIN
ID 10034503