Download Voyager Legend™

Voyager Legend
™
User Guide
This version of the wordmark can only be
used at this size. It has a larger registration
mark than the other size wordmarks.
Please use one of the other sizes if you need
Contents
What’s in the box
3
Headset overview
4
Pairing
Pair first time
Pair another phone
5
5
5
Charge
6
Fit
Change the eartip
Wear on the left or right
7
7
7
The basics
Make/take/end calls
Mute
Adjust the volume
Use sensors
Play or pause streaming audio
8
8
9
9
9
9
More features
Voice alerts
Voice commands
Customise your headset
Multipoint
10
10
10
11
11
Specifications
12
Support
2
This version of the wordmark can only be
used at this size. It has a larger registration
mark than the other size wordmarks.
Please use one of the other sizes if you need
a larger version.
What’s in the box
1
Headset
EURO + UK
6
AC charger
1
3
2
4
5
USB charge cable
7
Foam eartip covers and
silicone eartips
2
3
4
6
7
5
Car charger
3
This version of the wordmark can only be
used at this size. It has a larger registration
mark than the other size wordmarks.
Please use one of the other sizes if you need
a larger version.
Headset overview
voice
Call button
Volume button
Headset LED (indicator light)
Power button
Magnetic charge port
Mute button
Voice button
Play/Pause button
Be safe! Please read the safety guide for important safety, charging,
battery and regulatory information before using your new headset.
4
This version of the wordmark can only be
used at this size. It has a larger registration
mark than the other size wordmarks.
Please use one of the other sizes if you need
a larger version.
Pairing
Pair first time The first time you switch on your headset it begins the pairing process.
1
Place the headset on your ear and turn it on.
2
While the headset LEDs are flashing red and blue, activate Bluetooth® on your phone
and set it to search for new devices.
• iPhone: Settings > General > Bluetooth > On
• Android™ Smartphones: Settings > Wireless & Networks > Bluetooth: On > Scan for devices
NOTE Menus may vary by device.
3
Select “PLT_Legend.” If your phone asks, enter four zeros (0000) for the passcode or
accept the connection.
4
Once successfully paired, LEDs stop flashing red and blue and you hear “pairing successful.”
NOTE To enable caller name announcement, allow access to your contacts if your phone
prompts you.
After pairing your headset to your phone you may want to pair another or new phone.
Pair another phone
1
Switch on your headset then choose:
and say “Pair mode,” or
• Tap the Voice button
• Press and hold the Call button until you hear “Pairing”
2
While the headset LEDs are flashing red and blue, activate Bluetooth® on your phone
and set it to search for new devices.
3
Select “PLT_Legend.” If your phone asks, enter four zeros (0000) for the passcode or
accept the connection.
4
Once successfully paired, LEDs stop flashing red and blue and you hear “pairing successful.”
NOTE To enable caller name announcement, allow access to your contacts if your phone
prompts you.
5
This version of the wordmark can only be
used at this size. It has a larger registration
mark than the other size wordmarks.
Please use one of the other sizes if you need
a larger version.
Charge
Your new headset has enough power to pair and make a few calls before
charging is needed, though you may charge at any time.
1
Align snap-fit magnetic areas of headset and USB cable.
2
Attach cable to USB wall charger or laptop for 90 minutes. LEDs turn off once fully charged.
6
This version of the wordmark can only be
used at this size. It has a larger registration
mark than the other size wordmarks.
Please use one of the other sizes if you need
a larger version.
Fit
Change the eartip 1
Change the eartip for a better fit.
Push in eartip and rotate to the left to unlock it.
2
1
2
Align new eartip into slot.
3
Rotate it to the right to lock it into place.
2
1
Wear on the left or right To wear the headset on your other ear, rotate the boom upwards then twist it around so
the eartip is on the other side before lowering the boom.
1
3
2
7
This version of the wordmark can only be
used at this size. It has a larger registration
mark than the other size wordmarks.
Please use one of the other sizes if you need
a larger version.
The Basics
voice
Answer a call
Make/take/end calls Choose:
• Place the headset on your ear to answer call, or
• Say “answer” after call is announced, or
• Tap the Call button
NOTE You can change the voice command language via the MyHeadset™ Updater tool. The available languages are English UK, French, German and Spanish. See Voice Commands for details.
Answer a second call
First, tap the Call button
new call.
End a call
Tap the Call button
to end current call, then tap the Call button
again to answer
to end current call.
Reject a call
Choose:
• Take off the headset , or
• Say “ignore” after call is announced, or
• Press Call button for 2 seconds
Call back last call
Double-tap the Call button
Voice dial (phone feature)
Press the Call button for 2 seconds, wait for phone prompt and then tell the phone to dial
the name of a stored contact.
Caller announcement
When wearing your headset, you will hear the name of a contact calling you so you can
decide whether to answer or ignore the call.
An incoming caller name is announced:
• if your phone has the Phone Book Access Profile (PBAP)
• if you granted access to your contacts during pairing process
• if they are a stored contact
.
8
This version of the wordmark can only be
used at this size. It has a larger registration
mark than the other size wordmarks.
Please use one of the other sizes if you need
a larger version.
Mute Adjust the volume Use sensors However, in the following situations, an incoming caller name is not announced:
• if you use the sensors to automatically answer a call while putting on your headset
• if the caller is unknown, unlisted, or blocked.
During a call, you can mute the microphone.
Tap the Mute button . You will hear “mute on” confirmation. An alert repeats every
15 minutes to remind you of microphone mute. Tap the Mute button again to open the
microphone and hear “mute off” confirmation.
Toggle the Volume button
up (+) or down (–) during a call or while streaming audio.
Smart Sensors™ technology in this headset recognizes if the headset is being worn and can
automatically perform time-saving functions.
Putting on your headset will:
• Answer an incoming call
• Transfer an active call from your phone
• Resume streaming audio
Taking off your headset will:
• Reject an incoming call
• Transfer an active call to your phone handset
• Pause streaming audio
• Lock the Call button to avoid accidental calls
Reset Sensors
You may need to reset the sensors if they are not working as expected.
1Test Wearing the headset, tap the Call button to test sensors. A talk time voice alert
means sensors are working. A tone means sensors need to be reset .
2Reset To reset the sensors, charge your headset and place on a flat non-metallic surface for
more than 10 seconds.
Play or pause streaming audio
A 2-second press of the Play/Pause button
streaming audio.
will either pause or resume playback of
NOTE You must pause your streaming audio before you:
• use your headset’s voice commands
• initiate an outbound call via the headset (call back or voice dial)
NOTE If you power-off the headset or go out of phone range while streaming audio,
your headset will not play/pause the stream upon reconnection with your phone until you
manually resume streaming with your phone.
9
This version of the wordmark can only be
used at this size. It has a larger registration
mark than the other size wordmarks.
Please use one of the other sizes if you need
a larger version.
More features
Voice alerts Voice commands Your headset tells you about status changes in English. You can change the voice alert
language by visiting plantronics.com/myheadset and downloading the MyHeadset™
Updater tool. The available languages are Cantonese, English U.K., French, German,
Mandarin and Spanish.
Voice alerts list
• “Power on/off”
• “Answering call”
• “Talk-time (x) hours”
• Talk-time less than 2 hours”
• “Battery low”
• “Recharge headset”
• “Phone 1 disconnected/Phone 2 disconnected”
• “Phone 1 connected/Phone 2 connected”
• “Pairing”
• “Pairing successful”
• “Pairing incomplete, restart headset”
• “Mute on/off”
• “Volume maximum/minimum”
• “Voice recognition on/off”
• “Calling back last number”
• “Call back XYZ”
Tap the Voice button , wait for command request, then say a command. For example,
“What can I say?” tells you the full list of available commands. You can change the
voice command language by visiting plantronics.com/myheadset and downloading the
MyHeadset™ Updater tool. The available languages are English U.K., French, German,
and Spanish.
Voice commands list
• “Am I connected?”
• “Answer”
• “Call information”
• “Call Vocalyst”
• “Cancel”
• “Check battery”
• “Ignore”
• “Pair mode”
• “Redial”
• “What can I say”
NOTE The voice-dial feature on your phone is initiated by pressing the Call button
2 seconds. The voice-dial feature is not a headset voice command.
for
10
This version of the wordmark can only be
used at this size. It has a larger registration
mark than the other size wordmarks.
Please use one of the other sizes if you need
a larger version.
Disable the answer/ignore voice commands
To disable the “answer/ignore” voice commands
1
2
3
Switch on the headset.
Press and hold the Voice button
until you hear a double tone.
Repeat to reactivate the voice answer commands.
Customise your headset Your headset understands and speaks in English. You can change the language and other
settings online.
MyHeadset™ Updater tool enables you to:
• Receive firmware updates
• Change language for voice alerts and commands (English U.K., French, German, and
Spanish. Voice alerts are also available in Cantonese and Mandarin.)
• Change regional phone number for Vocalyst service
• Turn voice commands on/off
• Turn Smart Sensors™ on/off
• Turn high quality audio (A2DP) streaming on/off
• Turn “mute off” voice alert on/off
1
2
3
Download MyHeadset™ Updater
Connect your headset and USB cable to your computer.
Download the MyHeadset™ Updater tool from plantronics.com/myheadset.
Edit language, regional settings, configure other features, and download updates
when available.
Multipoint Voyager Legend supports multipoint technology, which allows you to use one headset
with two different Bluetooth mobile phones. To pair your headset to a second phone,
see “Pair another phone”.
To answer a second call on the other phone, the current call must be terminated or
transferred back to the first phone. If you choose not to answer, the second call will go
to voice mail.
1
2
Tap the Call button
Tap the Call button
NOTE To avoid issues with multipoint, use the Call button
phone controls.
Checking battery level to end the first call.
again to answer the second call.
on the headset rather than your
There are two easy ways to check the remaining battery level of your headset.
• Use the voice command ‘Check battery’.
• Look at the Headset Battery Meter on your iPhone (automatically displayed) or
Android smartphone (enabled by the MyHeadset™ or Find Myheadset™ apps).
11
This version of the wordmark can only be
used at this size. It has a larger registration
mark than the other size wordmarks.
Please use one of the other sizes if you need
a larger version.
Specifications
Talk time
Up to 7 hours
Standby time
Up to 11 days
Operating distance (range)
Up to 10 meters (33 feet), Class II
Headset weight
18 grams
Charge connector
Micro USB cable with magnetic snap-fit connection to
headset, modular AC wall charger 100-240v, car charger
Battery type
Rechargeable non-replaceable lithium ion polymer
Charge time (maximum)
90 minutes for full
Power requirements
5V DC – 180mA
Bluetooth version
Bluetooth v3.0
Bluetooth profiles
Supports Advanced Audio Distribution (A2DP), Audio/
Video Remote Control (AVRCP),Wideband Hands-free
v1.6 (HFP), Headset v1.2 (HSP), Phone Book Access
Profile (PBAP), Secure Simple Pairing (SSP2)
Noise and wind cancelling
Triple-mic active Digital Signal Processing (DSP) plus:
• Internal, adaptive 20-band equalizer
• Acoustic echo cancellation
• Sidetone detection for noise conditions
Triple-barrier wind noise protection includes:
• Stainless steel windscreens
• Acoustic fabric mesh
• Electronic filter in microphone circuitry
Operating temperature
0 – 40°C (32°F – 104°F)
Storage temperature
0 – 40°C (32°F – 104°F)
Charging temperature
0 – 40°C (32°F – 104°F)
12
This version of the wordmark can only be
used at this size. It has a larger registration
mark than the other size wordmarks.
Please use one of the other sizes if you need
a larger version.
Support
plantronics.com/support
EN
Tel: 0800 410014
FI
Tel: 0800 117095
NO
Tel: 80011336
AR
Tel: +44 (0)1793 842443*
FR
Tel: 0800 945770
PL
Tel: +44 (0)1793 842443*
GA
Tel: 1800 551 896
PT
Tel: 0800 84 45 17
HE
Tel: +44 (0)1793 842443*
RO
Tel: +44 (0)1793 842443*
HU
Tel: +44 (0)1793 842443*
RU
Tel: 8-800-200-79-92
Tel: +44 (0)1793 842443*
CS
Tel: +44 (0)1793 842443*
DA
Tel: 80 88 46 10
DE
Deutschland 0800 9323 400
Österreich 0800 242 500
Schweiz
0800 932 340
EL
Tel: +44 (0)1793 842443*
ES
Tel: 900 803 666
IT
Tel: 800 950934
NL
NL 0800 7526876
BE 0800 39202
LUX 800 24870
SV
Tel: 0200 21 46 81
TR
Tel: +44 (0)1793 842443*
*Support in English
Safety information: see the separate “For Your Safety” booklet
2-year limited warranty details: plantronics.com/warranty
Plantronics B.V.
Scorpius 140
2132 LR Hoofddorp
Netherlands
plantronics.com © 2012 Plantronics, Inc. All Rights Reserved. Bluetooth is a registered trademark of Bluetooth SIG, Inc. and any use by Plantronics is under license. All other
trademarks are the property of their respective owners.
Patents pending
88887-07 (10.12)
This version of the wordmark can only be
used at this size. It has a larger registration
mark than the other size wordmarks.
Please use one of the other sizes if you need