Download TP 277, OP 277 (WinCC flexible) - Service, Support

Transcript
Commissioning a Project
7.5 Transfer
Type
Data channel
TP 277
OP 277
Transferring a project
Serial 1)
Yes
Yes
MPI/PROFIBUS DP
Yes
Yes
USB
Yes
Yes
Yes
Yes
Ethernet
Installing or removing an option
Transferring license keys and
uploading license keys
1)
7.5
7.5.1
7.5
Serial
Yes
Yes
MPI/PROFIBUS DP
Yes
Yes
USB
Yes
Yes
Ethernet
Yes
Yes
Serial 1)
Yes
Yes
MPI/PROFIBUS DP
Yes
Yes
USB
Yes
Yes
Ethernet
Yes
Yes
1)
Applies when PC/PPI cable is used
Transfer
Overview
Transfer
Transfer the executable project from the configuration computer to the HMI device.
You can start the "Transfer" mode manually or automatically on the HMI device.
Transferred data is written directly to the internal flash memory on the HMI device. For the
transfer, you use a data channel which you have to configure before starting a transfer.
Upload
You have the option to transfer the compressed project file together with the runtime project
to the HMI device. If necessary, the compressed project file can be retransferred and edited.
The HMI device must be equipped with an external memory card to which the compressed
project file can be saved.
Notice
Compressed project file
WinCC flexible does not check whether the compressed project file stored on the HMI device
corresponds to the existing runtime project.
7-4
TP 277, OP 277 (WinCC flexible)
Operating Instructions, 09/2007, 6AV6691-1DH01-0AB0