Download TP 277, OP 277 (WinCC flexible) - Service, Support

Transcript
Operating a Project
8.12 Project Security
Procedure - Creating a User in the Simple User View
Proceed as follows:
1. Touch the "<New User>" entry in the user view.
The following dialog opens:
2. Enter the desired user name and password.
Touch the corresponding input field. The alphanumerical screen keyboard is displayed.
3. Touch the "OK" button.
The following dialog opens:
4. Assign the user to a group.
Use
to open the list box "Group". Select
and
to scroll in the list box.
5. Touch the required entry in the drop-down list.
The selected entry is then accepted as input.
6. Touch the input field "Logoff time". The screen keyboard is displayed.
7. Enter a value between 0 and 60 for the logoff time in minutes. The value 0 stands for "no
automatic logoff."
8. Confirm your entries with "OK".
Procedure - Creating a User in the Enhanced User View
Proceed as follows:
1. Touch the desired field in the blank line of the user view.
The appropriate screen keyboard is displayed.
2. Enter the respective user data in the field:
– Assign the user to one of the groups from the list box.
– Enter a value between 0 and 60 for the logoff time in minutes. The value 0 stands for
"no automatic logoff."
TP 277, OP 277 (WinCC flexible)
Operating Instructions, 09/2007, 6AV6691-1DH01-0AB0
8-39