Download TP 277, OP 277 (WinCC flexible) - Service, Support

Transcript
Operating a Project
8.13 Closing the Project
Result
The user data for the user is changed.
8.12.7
Deleting a User
Requirements
You have opened a screen containing the user view.
To delete a user, you must be an administrator or have user management permission.
Note
The "Admin" and "PLC_User" users exist by default. These users cannot be deleted.
Procedure
To delete a user, delete the user name entered.
Result
The user has been deleted and may no longer log onto the project.
8.13
8.13
Closing the Project
Procedure
Proceed as follows:
1. Use the configured operator control to close the project.
Wait for the Loader to open after you closed the project.
2. Switch off power to the HMI device.
8-44
TP 277, OP 277 (WinCC flexible)
Operating Instructions, 09/2007, 6AV6691-1DH01-0AB0