Download 5418 Manual
Transcript
SPECIFICATIONS Video Amplifier Bandwidth Input Video Signal OWNERS MANUAL 2.25Gbps .., 1.3Vp-pMax Input Connector Type HDMI 19 pin Output Connector Type HDMI 19 pin Power Consumption 6W Max Power Supply Dimensions (LxWxH) mm 6VDC, 1A 80x51.5x20 Product Weight 80g Warranty H5P-10EM LIMITED WARRANTY TO ORIGINAL PURCHASER 1 input, 2 output HDMI Splitter MONOPRICE warrants the equipment it manufactures to be free from defects in material and workmanship for the following limited warranty period: Twelve (12) months parts and labor If equipment fails because of such defects and MONOPRICE is notified within twelve (12) months from the date of shipment, MONOPRICE will, at its option, repair or replace the equipment, provided that the equipment has not been subjected to mechanical, electrical, or other abuse or modificationsEquipment that fails under conditions other than those covered will be current price of parts and labor in effect at the repair. repaired at the Such repairs are warranted for ninety (90) days from the day of reshipment to the buyer. This warranty is in lieu of all other warranties expressed or implied, including without [imitation, any implied warranty or merchantability or fitness for any particular purpose, of which are expressly disclaimed. all The information in this manual has been carefully checked and is believed to be accurate. However, MONOPRICE assumes no responsibility for any inaccuracies that may be contained in this manual. In no event wilf MONOPRICE, be liable for direct, indirect, special, incidental, or consequential damages resulting from any defect or omission in this manual, even if advised of the possibility of such damages, The technical information contained herein regarding HDMI switcher features and specifications is subject to change without notice. Note: Mount the splitter away from sources of electromagnetic or radio frequency interference, and also away from heat and moisture. To ensure optimum performance, you should use MONOPRICE's high quality cables with this product. Installation H5P-10EM Front Panel From HDMI Power In enabled Source 1 input, 2 output HDMI Splitter Thank you for your purchase of the MONOPRICE HDMI Splitter. We always strive to offer the finest quality product at the best possible price. Your complete satisfaction is important to us. The HDMI Splitter is designed to make your HDTV experience more comfortable, productive and less expensive. The HDMl Splitter offers solutions for Home Theater, A/V installations, bars and pubs, schools and corporate training environments. The HDMI Splitter sends the same video output to two HDTV digital screens. It is a flexible solution that accommodates multiple displays. Simply connect your HDTV displays to the splitter's display output. The HDMl Splitter will equalize the HDMI signal as well as support long length cable applications. Rear Panel To HDMI enabled To HDMI enabled Display Devices Display Devices Current Output Indicator Features and Characteristics Connect one HDMI sources to up to two HDTV display devices Maintains 480i, 480p, 720p, 1080i and 1080p resolutions Maintains highest HDMI single link video resolution and digital audio signal Supports HDCP compfiant devices HDMI or DVl-HDMI cables are used to connect to the input and splitter outputs Active output channels are displayed on the front panel LED's, which are automatically activated when a cable Is connected to the corresponding output. Connecting the HDMI Splitter Can be connected in series with a MONOPRICE HDTV HDMI switcher for connection of multiple sources to multiple display devices. <=$ Package Contents EtxHDMI 1X2 splitter 01x 6VDC 1A power supply EHx User Manual O <=> ^ You can mount the splitter on a flat horizontal surface. Connect the HDMi cables from the HDTV sources into the HDMf Splitter inputs. Connect the cable from your display (monitor or projector) into the HDMl outputs of the HDMI Splitter. Plug the 6VDC power supply into the HDMl Splitter. Note: When adding mc^e output ports to an existing working configuration, it might be necessary to Hush the "Reset" button on the Splitter to activate the new port.