Download WLE2-POE-S

Supplying Power to non-POE-compatible AirStations
WLE2-POE-S
User’s Manual
A WLE-POE-R7 or WLE-POE-R33 Receiver Adapter (sold separately) is required when supplying
power to an AirStation or BroadStation that does not support Power Over Ethernet (POE).
Thank you for purchasing the WLE2-POE-S.
Read this manual carefully before using the product to be sure of correct usage. After reading, store the manual
in a safe place for future reference.
Use the following procedure to supply power to non-POE-compatible AirStations or BroadStations.
Do not connect a hub or PC to the POE port.
Doing so may result in damage or burnout of the hub or PC. Connect this product to a Receiver
Adapter’s POE port.
Prohibit
Product Overview
The WLE2-POE-S and the Receiver Adapter do not have a repeater function. The total cable
length from other device connected to the product's LAN port to the AirStation or BroadStation(total
length of 1, 2, and 4 in the following diagram) is 100 m max.
The WLE2-POE-S Power Supply Adapter is an adapter for supplying power to the AirStation or the
BroadStation. Using this product enables compatible AirStations or BroadStations to be used in locations that
are not provided with a nearby power supply.
1
Connect the LAN port of the WLE2-POE-S to the hub or computer.
Package Contents
2
Connect the LAN port of the Receiver Adapter to the AirStation or BroadStation.
The product is packaged with the following items. Contact your dealer if any item is not included in the package.
3
Connect the DC cable of the Receiver Adapter to the DC connector of the AirStation or
.
BroadStation.
Supply Adapter(This product) ............................................. 1
AC Adapter
Connect the attached power
supply cable
POE port
Connect to the POE-compatible products or Receiver
Adapter.
4
Connect the POE port of the WLE2-POE-S to the POE port of the Receiver Adapter using
Cat 5 network cable or higher.
If network cable lower than Cat 5 is used, the power may not be supplied to the
AirStation or BroadStation.
LAN port
Connect to hub, etc.
5
Connect the power cable to the AC Adapter of the WLE2-POE-S, and then insert the
plug into the AC power outlet.
Power indicator
Lit green when the product is connected to the AC outlet.
.
.
.
Power supply cable ............................................................. 1
User's manual (this data sheet) .......................................... 1
User's registration card and warranty certificate ............. 1
Note: After detaching the user's registration card from the warranty certificate, be sure to fill out the
required information and return to us. Store the warranty certificate in a safe place.
Note: Always refer to any additional information provided in the package with the product.
Connection Precautions
.
.
..
.
.
.
.
.
Connect the AC adapter last.
Always connect a POE-compatible AirStation or Broadstation or Receiver Adapter(WLE-POE-R7 or
WLE-POE-R33) to the POE port.
Do not connect a hub or PC to the POE port.
Doing so may result in damage or burnout of the hub or PC. Always connect a POEcompatible AirStation or BroadStation or Receiver Adapter.
Specifications
Always use Cat 5 network cable or higher (all Melco ETP-series cables can be used) to connect this
product with a POE-compatible AirStation or BroadStation or Receiver Adapter.
Using a different cable may prevent the supply of power.
The WLE2-POE-S Power Supply Adapter does not have a repeater function. The total cable length
from other device connected to the LAN port to the AirStation or BroadStation is 100 m max.
Use LAN cable that is compatible with the products to which it will be connected.
Use commercially available cables. Using cables prepared by the user may result in the network
configuration not functioning properly.
Always use Cat 5 network cable or higher (all Melco ETP-series cables can be used) when configuring a network of 100 Mbps.
Supplying Power to a POE-compatible Products
Use the following procedure to supply power to a POE-compatible products.
Prohibit
Do not connect a hub or PC to the POE port.
Doing so may result in damage or burnout of the hub or PC. Connect a POE-compatible
products.
Refer to the product catalog or Melco homepage (http://www.airstation.com/english/) for details
on the most recent products and compatible models.
Compatible Products
The WLE2-POE-S can be used to supply power to the following Products (as of February, 2003).
Always use this product to supply power to the following products. Supplying power to other
products may result in damage or burnout of the equipment.
Refer to the Melco homepage (http://www.airstation.com/english/) for details on the most recent compatible models.
.
.
.
Models Compatible with POE
..
WLM/WLMR/WLM2 series
Models Not Compatible with POE
.
.
.
Models Requiring the WLE-POE-R7 (sold separately)
WLA-L11G
WLAR-L11G-L
WLAR-L11-S
.
.
.
WLAR-L11-M
Models Requiring the WLE-POE-R33 (sold separately)
WBR-B11
WLA-G54
WLA2-S11
WBR-G54
.
.
WLA-AWCG
BLR-TX4S
Specifications
This product does not have a repeater function. The total cable length from other device connected to the product to the the POP-compatible product is 100 m max(total length of 1 and 2 in the
following diagram).
1
Connect the POE-compatible product to the POE port using Cat 5 network cable or higher.
Using a different cable may prevent the supply of power.
2
Connect the hub or PC to the Power Supply Adapter's LAN port.
3
Connect the AC adapter to the AC outlet.
*
Using this device in a domestic environment may result in electromagnetic interference. Therefore, the
user may need to take appropriate measures in such situations.
If any malfunction occurs, apply the following measures.
Increase the distance between this product and any televisions or radios.
Change the directional angle between this product and any televisions or radios.
.
.
Port Specifications
.
.
LAN port
CAUTION
POE port
Strongly
recommended
Thoroughly read the user's manuals for each PC and peripheral device and handle each
device according to the manufacturers' instructions.
Do not install the product in the following locations, as doing so may result in electric
shock or fire, or may adversely affect the equipment.
Connector form(8position RJ-45
.
.
.
.
.
.
.
.
Prohibit
modular jack)
For your safety, be sure to follow the instructions given below
Follow the instructions below to avoid harming yourself, other people and property, and to ensure safe use of the
product.
For your, others and property safety be sure to read, understand and follow the instructions given below thoroughly
before using the product. This manual contains instructions concerning general operation of the computer to which
the product is connected in addition to those concerning the product itself.
Please take note that our warranty will not cover any failures and problems of the computer, any losses and failures
of data, or failures and problems of the product caused by misuse.
Strongly
recommended
Locations with strong magnetic fields (as this may result in damage).
Locations with static electricity (as this may result in damage).
Locations prone to vibration (as this may result in injury or damage).
Locations that are not level (as this may result in rolling, falling, or injury).
Locations in direct sunlight (as this may result in damage or deformation).
Locations close to fire, or subject to heating (as this may result in damage or deformation).
Locations where there is a danger of current leakage (as this may result in damage or
electric shock).
Locations where there is a danger of water leakage (as this may result in damage or electric
shock).
To prevent damage due to static electricity, before touching the equipment, first
touch a nearby metal object (such as a door handle or metal window blinds) to
discharge any static electricity from your body.
Static electricity from your body may result in damage to the equipment.
Remove the dust from all connectors and do not touch the connecters.
Signs and symbols used in this manual
Strongly
recommended
Dust may result in failure in performance.
Warning signs:
WARNING
CAUTION
Do not obstruct or place other devices against the air vents or fans.
The instructions with this sign indicate prohibited actions. Failure to follow the instructions
shown with this sign may result in death or serious injury to the user.
Prohibit
Failure to follow the instructions shown with this sign may result in injury to the user or
property damage.
Do not wipe the product with organic solvents such as thinners or benzine.
Prohibit
Symbols:
This indicates warnings and cautions.
(Ex.
Exercise care to avoid an electric shock.)
This indicates prohibiting actions. (Ex.
Do not disassemble.)
This indicates what must be done. (Ex.
Disconnect the plug from the outlet.)
This may result in failure in performance.
Use a dry cloth to wipe any dirt from the product. For heavy dirt, apply neutral cleaning agent to a clean
cloth, wring out tightly, and wipe off the dirt.
Do not connect a hub or PC to the product's POE port.
Prohibit
Doing so may result in damage or burnout of the hub or PC. Connect a POE-compatible products
to the POE port.
WARNING
Strongly
recommended
Always follow the warnings and precautions indicated by the manufacturers of the PC and
peripheral devices when installing and using this product.
Do not attempt to disassemble or repair this product.
Prohibit
It may result in failure, electric shock, or fire. We may refuse repair, if the seal and cover of this product are
removed.
Insert the AC adapter firmly into the AC socket.
Strongly
recommended
Prohibit
Using the equipment without the AC adapter firmly inserted may cause a short circuit or overheating, or
result in fire or electric shock.
Do not damage, process, overheat, or attempt to repair the power supply cable, as this
may result in fire or electric shock.
..
..
.
When installing the equipment, do not crimp the power supply cable between walls, racks (tanks), or similar.
Do not place heavy objects on the power supply cable, or pull the cable.
Do not place the power supply cable close to heat sources, or overheat the cable.
When removing the power supply cable, be sure to remove it by holding the plug.
Do not bend the cable past its natural bending radius.
Do not move equipment with the power supply cable still connected.
If the power supply cable is damaged, consult your dealer.
FCC Statement
This equipment has been tested and found to comply with the limits for a class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case, the user will be required to correct the interference at his own
expense.
CE approved statement
Install the equipment in a location where children cannot reach the interior of the electrical
equipment, cables, or connectors.
Strongly
recommended
Failure to do so may result in injury.
Do not handle the product with wet hands.
Prohibit
Doing so when the AC adapter is connected to the AC power outlet may result in electric shock. Doing so
even if the product is not connected to the power outlet may cause the product to malfunction.
CE approval only applies when this product is used in conjunction with the
WLE-POE-R7/R33.
Do not use the WLE2-POE-S in bathrooms or other locations with high water
content or humidity.
Prohibit
Using the device under these conditions may result in fire or electric shock.
If smoke, an unusual odor, or strange sound is emitted from the product,
remove the plug from the AC power supply socket.
Remove the
power supply
plug
All rights for this manual are owned by MELCO INC. No part of it may be transmitted, reproduced or
revised without expressed permission from MELCO INC.
The names of other products used in this manual are trademarks or registered trademarks.
Trademark symbols , ,  are not indicated in this manual.
Continuing to use the product under these conditions may result in a short circuit, fire, or electric shock.
Specifications, designs and other descriptions in this manual are subject to change without notice.
Consult the your dealer immediately.
This manual has been carefully prepared, however, feel free to contact your nearest sales representative
if you have any questions or problems.
Do not drop the product or subject it to severe shock. If the product is subjected
to such conditions, remove the plug from the AC power supply socket.
Remove the
power supply
plug
Continuing to use the product under these conditions may result in a short circuit, fire, or electric shock.
Consult your dealer immediately.
Remove the
power supply
plug
Do not allow the product to come in contact with liquid or foreign matter. If liquid or
foreign matter enters the product, remove the plug from the AC power supply socket.
Continuing to use the product under these conditions may result in a short circuit, fire, or electric shock.
Consult the your dealer immediately.
In addition, please note that MELCO INC. shall not be liable for any expenses incurred due to damage or
loss arising from use of this product, even though MELCO INC. has been advised of the possibility of
such damage.
This product is designed for home or office use as a general-purpose OA device. MELCO INC. shall
accept no liability for any damage incurred by using the product for any other purpose.
.
.
Do not use the product for applications that must comply with high safety requirements, such as
medical instruments or any systems directly or indirectly related to saving or sustaining life.
If using the product for applications with devices and computer systems requiring higher reliability
than general-purpose OA devices, be sure to configure the system with an appropriate safety design
and measures against failure.
WLE2-POE-S User’s Manual
Melco Inc.
14 February, 2003 First revision
PY00-28214-DM10-01
1-01