Download USER`S MANUAL MANUEL DE L`UT SATEUR

(_We_inghouse
USER'S MANUAL
MANUEL DE L'UT SATEUR
MANUAL DEL RIO
WidescreenHDTV
TVHDb @ran (_6ant
TVHDPanta@Orande
IMPORTANT
SAFETY
Important
Safety
Precautions
GENERAL
AND PRECAUTIONS
Information
......................................................................
......................................................................................................
..........................................................................................................
INFORMATION
...................................................................................................
1
1
2
4
Feature ............................................................................................................................
4
Controls and Ports of the Panel ......................................................................................
5
Accessories
Remote
....................................................................................................................
9
Control .............................................................................................................
10
INSTALLATION
Installation
AND FUNCTION
............................................................
.....................................................................................................................
How to remove
Function
ADJUSTMENT
the BASE .............................................................................................
adjustment
TROUBLESHOOTING
12
12
15
.....................................................................................................
16
........................................................................................................
34
PC INPUT
PRESET
TIMMING
PRODUCT
SPECIFICATION
TABLE ...............................................................................
..............................................................................................
37
39
Thiswideactive
matrix
TFT(thinfilmtransistor)
liquid
crystal
monitor
isdesigned
foruseas
astand
alone
TVaswellasa display
device
forvideoelectronics
appliances
andpersonal
computers.
ImDortant
Warning
Information
: To reduce the risk of fire or electric shock, do not expose this product to rain or
moisture.
CAUTION
The symbol is intended
Voltage"within
constitute
to alert the user to presence
the product's
ofun-insulated
that may be of sufficient
to alert the user that improper
result in product
malfunction.
or unnecessary
problems.
The user should
device. There are no user-serviceable
to avoid accidents
parts inside.
regulations
state that any unauthorized
this equipment
may void the user's authority
One Federal
Court has held that unauthorized
Important:
is an infringement
be copyrighted
or modify this
Refer any service
issues to
service personnel.
Caution : FCC/CSA
programs
to
use of the product may
pay attention
:To reduce the risk of electric shock, do not attempt to disassemble
qualified
"Hazardous
magnitude
a risk of electric shock to persons.
The symbol is intended
Caution
enclosure
of U.S. copyright
and any unauthorized
recording
changes
to operate
recording
laws. Certain
or modifications
to
it.
of copyrighted
Canadian
programs
TV
may also
in whole or in part may be in violation
of
these rights.
According
of allowable
cells,
further
to industrial
defective
standards
for LCD display
pixels. Although
technology;
we produce
panels
there still may be some cells that do not produce
information,
please
contact
sales or technical
there are a certain
with more than 99.9%
light or remain
support.
constantly
number
active
lit. For
Safety Precautions
1. Cleaning
: Unplug
the power cord from the AC outlet before
Use a damp cloth to clean the product.
2. Water
content
and moisture
: Do not use the product
such as swimming
3. Ensure
pools,
that no water droplets
cleaning
Do not use liquid cleaners
bathtubs
remain
the product.
or aerosol
near water or areas
cleaners.
of high moisture
or wet basements.
on the screen.
Water can cause
permanent
discoloration.
4. Heat sources
: Keep the product
stoves and other
5. For added
heat-generating
protection
during
away from heat sources
products
a lightning
(including
storm
or for extended
unplug the power cord from the wall outlet and disconnect
will prevent
damage
6. tf an outside
properly
to the product
antenna
grounded
( Coaxial
connector
earthed.
)
is connected
so as to provide
shielding
such as radiators,
periods
the antenna
of non-use,
(if used).
due to power line surges.
to the product,
make sure the antenna
is
some protection
against
voltage
surges.
from cable distribution
system
should
be probably
Example of antenna grounding
As per national electrical code
lead in wire
_round
heaters,
amplifiers).
clamp
Antenna
discharge
_Gr
Electric service
quipment ...................
Ground
.........
clamps
Power service
Electrode system
u
This
7. Stand : Do not place the product
on an unstable
cart, stand,
the product
tripod or table.
on an unstable
fall, resulting
base can cause the product
in serious
well as damage
stand, tripod,
personal
to the product.
bracket
the manufacturer
only mounting
Placing
injuries
to
as
Use only a cart,
or table recommended
by
or sold with the product.
hardware
Use
recommended
by the
8. Use care when moving
the product
on a rolling
and uneven
can cause the product
manufacturer.
floor surface
9. Ventilation
ventilation.
can cause
: The vents and other
openings
Do not cover or block these vents
overheating
and/or
shorten
product
was not designed
in an enclosed
provided
space
to operate
10. The LCD panel used in this product
product
is dropped
11. During
the LCD panel lifespan
pixels
12. An outside
may appear
questions
antenna
lines or other electrical
caution
to prevent
force
as insufficient
for
ventilation
Do not place the product
since they can block ventilation
environment.
openings.
Don't place the
or rack, unless proper ventilation
is
are followed.
is made of glass. Therefore,
it can break
if the
or struck.
Non-active
Refer pixel policy
are designed
in an enclosed
instructions
excessive
and openings
such as a bookcase
or the manufacturer's
stops,
in the cabinet
the life of the product.
on a bed, sofa, rug or other similar surfaces
This product
cart. Sudden
to fall from the cart.
to the reseller
system
conduits.
the antenna
with them may be fatal.
it is normal
on the screen
should
for a few pixels
as fixed points
for further
not be located
When installing
from coming
to become
clarification
in the vicinity
an outside
into contact
defective.
of red, blue or green.
on acceptable
of overhead
antenna,
loss.
power
use extreme
with said items,
as contact
Feature
Your TV is designed
the following special
with the latest technology
feature :
input included
and is a high-performance
•
Multi-sources
Componentx2.
•
Built-in combo tuner is able to receive ATSC,
•
Built-in
•
Embedded
10W dual channel
video enhance
RF IN, D-SUB,
HDMIx2,
Compositex2,
unit that includes
S-Videox2,
and
NTSC and Clear QAM Cable signals.
speakers.
and noise Reduction
features for the colorful
and clearest
picture possible.
•
Provided
multi-channel
•
Automatic
•
Component
sound decoder
for stereo and bilingual
broadcasts.
sleep timer control.
video input for high definition
to 720p, 1080i.
TV programming
(HDTV ready),
resolution
up
Controls and Ports of the Panel
Front Panel Views (SK-26H540S)
.
I
\\
I
,,
Function Keys
Remote sensor window & Power indicator
FUNCTION
1. MENU
KEYS
: Display the main menu. When OSD is appeared,
access the sub-menu.
2. VOLUME
3. CHANNEL
4. SOURCE
5. POWER
(+ / -) : Increase/decrease
menu.
(+ / -) : Change
press the button to select or
the volume or be the left/right
the channel
or be the up/down
arrow button for
arrow button for menu.
: Select the input source ( TV, Video 1, Video 2, YPbPr, HDMII,
HDMI2,
PC ).
: Turn the LCD-TV on or off.
6. REMOTE
SENSOR
7. POWER
INDICATOR
WINDOW
: aim the remote
control towards
: WHITE
LIGHT
power on
AMBER
LIGHT
power sleep
EXTINGUISHED
this spot on the TV.
power off
NOTE 1 : These buttons control the basic features of your TV, including the on-screen menu. To use
advanced features, you must use the remote control.
Front Panel Views (SK-26H730S)
Function Keys
Remote sensor window & Power indicator
FUNCTION
1. MENU
KEYS
: Display the main menu. When OSD is appeared,
access the sub-menu.
2. VOLUME
3. CHANNEL
4. SOURCE
5. POWER
(+ / -) : Increase/decrease
menu.
(+ / -) : Change
press the button to select or
the volume or be the left/right
the channel
or be the up/down
arrow button for
arrow button for menu.
: Select the input source ( TV, Video 1, Video 2, YPbPr, HDMII,
HDMI2,
PC ).
: Turn the LCD-TV on or off.
6. REMOTE
SENSOR
7. POWER
INDICATOR
WINDOW
: aim the remote
control towards
: WHITE
LIGHT
power on
AMBER
LIGHT
power sleep
EXTINGUISHED
this spot on the TV.
power off
NOTE 1 : These buttons control the basic features of your TV, including the on-screen menu. To use
advanced features, you must use the remote control.
Side Panel Views (SK-26H540S)
ANT.(RF input)
Connect the LCD TV to an over-the-air
_i_'-.,_
service to view NTSC and ATSC(HDTV)
2.
content.
YPbPr input
Connect an external video device with component
this jack.
T
5
antenna or cable
3.
YPbPrAudio
output to
input(L/R)
Connect an external audio source to this jack.
4.
Video1 input
Connect the Composite
!,ii!/ il
3
video to a legacy video such as a
VCR or video game system.
5.
Video2 input
6.
Video1 Audio input
7.
Video2 Audio input
8.
USB
9.
AC power in
2
Connect an external audio source to this jack.
Factory service port
Connect power cable to AC inlet.
10. Audio output(R/L)
Connect this output to an external stereo audio amplifier,
receiver or surround sound processor with R/L audio
inputs.
16
11. SPDIF output(Optical)
Connect this output to an external stereo audio amplifier,
15
receiver or surround sound processor with SPDIF optical
input.
12. VGAAudio
14
in
Connect to the audio out(Green)
from a computer.
13. VGA
--
13
Using a 15-pin VGA cable, connect to a computer.
--12
14. HDMI Audio input(R/L)
Connect the audio input if you using a DVl-to-HDMI
converter.
15. HDMI2 input
Connect to an external video device such as HD digital
cable/satellite
player.
16. HDMI1 input
receiver, HD STB, Media center PC, or DVD
Side Panel Views (SK-26H730S)
ANT.(RF input)
Connect the LCD TV to an over-the-air
antenna or cable
service to view NTSC and ATSC(HDTV)
2.
YPbPr input
Connect an external video device with component
output to
this jack.
7
5
content.
3.
YPbPrAudio
input(L/R)
Connect an external audio source to this jack.
4.
Video1 input
Connect the Composite
3
video to a legacy video such as a
VCR or video game system.
5.
Video2 input
6.
Video1 Audio input
Connect an external audio source to this jack.
7.
Video2 Audio input
Connect an external audio source to this jack.
8.
USB
9.
AC power in
2_
Factory service port
Connect power cable to AC inlet=
10. Audio output(R/L)
Connect this output to an external stereo audio amplifier,
receiver or surround
sound processor
with R/L audio inputs.
11. SPDIF output(Optical)
Connect this output to an external stereo audio amplifier,
15
receiver or surround sound processor with SPDIF optical
input.
12. VGAAudio
in
Connect to the audio out(Green)
14
from a computer.
13. VGA
Using a 15-pin VGA cable, connect to a computer.
14. HDMI Audio input(R/L)
--12
--13
11
!j]
Connect the audio input if you using a DVl-to-HDMI
converter.
15. HDMi2 input
Connect to an external video device such as HD digital
cable/satellite receiver, HD STB, Media center PC, or DVD
player=
16. HDMI1 input
Accessories
User's Manual
Power Cord
Warranty
Card
Remote
Control & Batteries
Quick Connect
Guide
Screw driver & Screws
x4(base)
Remote Control
1
Power
2
Switch TV power on/off,
Mute
Turn the sound on/off,
2
3
Swap
5
4
No support
PIP
8
5
No support
Backlight
&djust the LCD Backlight level
6
Sleep
1
Press to select a preset time interval for automatic power
down.
CO
8
Press to enable or disabled closed caption.
Favorite
Press and hold programable
current channel.
12
9
Channel
10
Select specific channel.
Enter
Execute
15
Key(A, B, or C). to save the
number keys
a command.
11
Input
12
Select input source.
VOL +/Volume Up/Down adjustment.
13
OH +/-
14
TV channel Up/Down
Screen Fit
15
Select video display format "Standard"
Menu
16
Display the User setup menu.
Return
17
Switch to previous TV channel
-Enter
19
21
23
25
27
Execute
18
adjustment.
a command.
AIVI<III_
OSD menual control(A/V
:TV channel
Up/Down; </1_ :Volume Up/Down)
]0
or "Fill".
1
19
Guide
20
Broadcast
Info.
program information.
Display the source and channel information.
21
2
4
5
22
Select YPbPrl
TV
23
'PC
7
8
YPbPrl
or 2 source input.
Select TV(NTSC/ATSC)
24
source input.
Select VGA source input.
HDMI
Select HDMI 1 or 2source input.
9
29
1
No support
DVI
27
No support.
Video
28
Select Video 1 or 2 input.
S-Video
No support
29
1
1
15
17
18
19
21
23
25
27
YPbPr2
26
1
1
12
25
2O
22
24
28
Dot button
Quicker access to all the available
virtual channels
Installation
1. Insert Batteries into Remote Control
1) Remove the battery cover.
2) Insert
two size AAA
batteries
corresponding
to (+) and
(-) marks
on the battery
compartment.
CAUTION
Only use AAA batteries.
Do not mix new and old batteries. This may result in cracking or leakage, which may
pose a fire risk or lead to personal injury.
Insert batteries according to (+) and (-) markings. Inserting the batteries incorrectly
may result in cracking or leakage, which may pose a fire risk or lead to personal injury.
Dispose of used batteries in accordance with Ioca laws and regulations.
Keep batteries away from children and pets.
When the remote control will not be used for an extended period, remove the batteries.
]2
2. Connections
O0o. !
Y
Y
.J
o_
]3
/
3. Connect power cables
Connect the power cord to the LCD TV then to a proper AC outlet.
IMPORTANT:
all devices
The power input voltage
for TV is 120Vac,
before
beginning;
make sure
are turned off.
4. Turn Power On
Press the power button on the right side of the LCD TV, or press the power (Red) button
on the remote
control.
5. Select input source for the LCD TV using the OSD menu or remote
control direct select buttons
6. If connecting to Antenna, Cable or other RF source on TV inputs:
See page 19 to scan and edit available
channels.
7. If connecting to a PC(VGA):
For the best picture
Refer to the graphic
quality,
set the timing
of your computer
card's user guide of your computer
]4
to 1366 x 768 at 60Hz.
to set this timing.
How to remove the BASE
a.
Carefully
b.
Remove the four screws
place the TV face down on a soft clean surface.
underneath
the BASE.
(See picture below)
c.
Pull out the BASE from the TV.
SK-26H540S
SK-26H730S
]
I
]5
Function adjustment
There are four main Setup Menus;
functions
can be adjusted
either
these are Settings,
by the remote
Channels,
Locks and Guide. All the
control or by using the control keys on the
LCD TV's right side.
Viewing OSD Menu
To display
the main menu, press the Menu button on the right side of front control keys of
the LCD TV or the MENU
key on the remote
OSD menu and Enter key to select desired
control.
Press arrow
keys to select desired
setting.
Menu/Exit
Up
Exit to previous menu
Right
Enter
Down
Picture
Picture
including
Settings,
View Mode, Presets,
Advanced,
and Reset.
Settings
Settings
including
Brightness,
Contrast,
Hue, Saturation,
please press arrow keys to select or adjust your favorite
]6
Sharpness,
and Backlight,
picture settings.
Brightness, Contrast, Hue, Saturation, Sharpness, Backlight
Press arrow keys to set value.
View Mode
Adjust your TV screen to handle different
Standard/Fill/Overscan
picture formats.
Presets
There
are five presets
mode
for your favorite:
Showroom,
Game,
Sports,
Movie,
Custom.
Advanced
Advanced including Film Mode, Dynamic Contrast, Color Stretch, Noise Reduction,
and Color Temperature.
Film Mode, Dynamic Contrast, Color Stretch
Choose
ON or OFF depend on your favor.
]8
and
Noise Reduction
Press arrow keys to select or adjust your preferred
settings.
Off/Low/Medi/High
Color Temperature
Press arrow keys to select or adjust your preferred
Cool/Neutral/Warm/Custom
Audio Setting
]9
color temperature
settings.
Bass, Treble, Balance
Use arrow keys to adjust value.
Analog Audio
Select an analog audio preference
if TV signal is analog.
Mono/Stereo/SAP
Digital Audio
Select sound track for digital channels.
20
SPDIF
Select AC3/PCM
Level Set, TV Speaker
Select ON/OFF
2!
Channels
Channel list
To display which
channels
have been scanned.
22
Antenna Scan
To auto scan current
available
channels
by using Antenna
Scan.
available
channels
by using cable Scan.
Cable Scan
To auto scan current
23
Settings
Close Captions
Set CC ON/OFF
24
Basic Selection
Choose
the type of closed
caption
settings
to use for programs
caption
Advanced Selection
Choose the type of Advanced
closed caption
25
broadcast
with
basic
Advanced Appearance
Set the appearance
of advanced
Closed Captions.
Caption Preference
Select Always
Basic/Always
Advanced/Automatic.
26
Sleep Timer
Set the sleep timer you want.
PCNGA
27
Horizontal,
Vertical
Use arrow keys to adjust your picture horizontal
Phase
You can use Phase to adjust your picture phase.
AutoSync
Use toautoadjustyour VGA picture.
28
or vertical position.
DPMS
Set DPMS ON/OFF.
Menu Language
Use arrow keys to adjust Menu Language
Date & Time
Set Date & Time.
2P
Power Mode
Set TV power modes (Normal
saving = longer boot-up
= quick boot-up
time, but large power consumption;
Energy
time, but small power consumption.)
Autosource TM
Autosource
TM
will detect a new incoming
to the connection
of the new source's
signal and automatically
device.
3O
switch the input source
Custom Label
Choose the custom
source Label
FW Version
You can see what Software
version
your TV has.
RESET ALL
Reset all settings
back to factory
including
list.
channel
defaults.
Reset will delete all settings
3!
you have made
Locks
Lock feature
prevents
as programs
containing
The pin number
viewers
from watching
violence
is required
when
control to key in your pin number.
programs
you want
Select what you want to set.
USA TV Rating
All children
TV Y7
For older children
TV G
General
audience
TV PG
Parental
guidance
TV 14
Parental
strongly
TV MA
Mature audience
suggested
cautioned
only
USA Movie Rating
G
General
PG
Parental guidance
PG-13
Parental strongly
R
Restricted
NC17
No on17
X
Adult audience
to enter
Locks menu,
The factory default pin number
Rating Locks
TV Y
that are not age-appropriate,
such
or adult language.
audience
suggested
cautioned
and under admitted
only
32
just
is 0000.
use the remote
Canada-French
G
General
programming,
suitable for all
audience
8 ans+
Children eight years and older
13 ans+ Viewers
13 year and older
16 ans+ Viewers
16 year and older
18 ans+ Adult
programming
Canada-English
C
Children
C8+
Children eight years and older
G
General
programming,
suitable for all
audience
PG
Parental guidance
14+
Viewers
18+
Adult
14 year and older
programming
33
There is no picture or sound.
• Make sure the AC adapter
is connected.
• Verify that there is a valid source signal.
• Make sure the correct input mode is selected.
There is no picture
from
AV.
• Make sure the BRIGHTNESS
• The florescent
Contact
is properly
lamp may have reached
an authorized
service
center.
• Make sure the video source is plugged
video-in
adjusted.
the end of its life.
into the composite
port.
There is no sound.
• Make sure the volume
is not set to minimum.
• Make sure the sound is not muted
There is no picture or sound, just noise.
• The source signal may be weak.
• Your provider
may be experiencing
difficulties.
• Check your input connections.
Picture is not clear.
• The source signal may be weak.
• The provider
may be experiencing
• Check input connections.
34
difficulties.
Picture
is light or improperly
tinted.
• Check the Hue, Saturation
and Color adjustments.
• Reset the TV to the factory default settings.
The picture is too dark.
• Select a different
Video Preset mode.
• Check the Brightness
• The fluorescent
Contact
Remote
control
of Picture Settings.
lamp may have reached the end of its life.
an authorized
service
center.
does not work.
• Install new batteries.
• Make sure the remote sensor window isn't blocked.
• Make sure the system
is in the right mode (TV / VCR / CBL /
AUX)
There are stripes
on the screen
or colors fade.
• There may be interference
from other appliances.
• There may be interference
between
the video source cable and
the power cable.
• Make sure the power and video cables are not touching.
Check
the Hue, Saturation
35
and Color adjustments
The picture
is not sharp.
• The signal source may be weak.
• The provider
may be experiencing
difficulties.
• Check input connections.
• Check the Sharpness
of Picture
Settings.
The picture moves.
• The source signal may be weak.
• The provider
may be experiencing
difficulties.
• Check input connections.
The picture
is doubled
or tripled.
• The source signal may be weak.
• Check input connections.
The picture
is spotted.
• There may be interference
around
the LCD TV.
36
from other appliances
nearby or
PC / Timing Table
No.
Mode
H.Freq.
H. Polarity
Pixel
Hor.
Resolution
Name
V.Fre.
V.
CLK
Total
VGA
31.469
Polarity
(MHz)
70HZ
1
720*400
VGA
60HZ
70.087
VGA
67HZ
VGA
72HZ
VGA
75HZ
SVGA
56Hz
SVGA
60Hz
SVGA
72Hz
SVGA
75Hz
75Hz
XGA
35.156
+
56.25
+
37.879
+
60.317
+
48.077
+
72.188
+
46.875
+
75.0
+
69Hz
XGA
70Hz
XGA
75Hz
Line
No.
Line
No.
Syc
Width
Line
No.
28.322
900
720
54
108
449
400
35
2
25.175
800
640
48
96
525
480
33
2
30.24
864
640
96
64
525
480
39
3
31.5
832
640
120
40
520
480
20
3
31.5
840
640
120
64
500
480
16
3
36.0
1024
800
128
72
625
600
22
2
400
1056
800
88
128
628
600
23
4
50.0
1040
800
64
120
666
600
23
6
49.5
1056
800
160
80
625
600
21
3
57.28
1152
832
224
64
667
624
39
3
65.0
1344
1024
160
136
806
768
29
6
75.0
1328
1024
144
136
806
768
29
6
78.75
1312
1024
176
96
800
768
28
3
74.481
1664
1289
192
136
746
720
22
3
83.462
1689
1289
200
136
828
800
24
3
108.00
1688
1289
248
112
1066
1024
38
3
74.55
48.363
60.004
56.476
12
1024"768
No.
Vert.
49.72
11
1024"768
Line
Bak
Porch
75.0
10
832*624
No.
Vert.
37.5
9
800*600
Display
37.861
8
800*600
Vert.
Total
72.809
7
800*600
Vert.
No.
35.09
6
800*600
CLK
Syth
CLK
66.667
5
640*480
No.
Her.
59.941
4
640*480
CLK
Bck
Porch
31.469
3
640*480
No.
Her.
+
2
640*480
CLK
Her.
Display
70.069
60.023
+
1024"768
75.029
+
13
60Hz
44.76
1280"720
60.0
14
+
60Hz
49.68
1280"800
60.0
+
60Hz
63.98
+
1280"1024
60.02
+
15
16
37
No.
Mode
Name
Resolution
H.Freq.
H.
Polarity
Pixel
Hor.
V.Fre.
V.
Polarity
CLK
Total
(MHz)
60Hz
47.712
+
1360"768
60.015
+
60Hz
48.96
+
1366"768
60.0
17
18
* The resolution
this list.
CLK
Her.
Her.
Display
No.
CLK
No.
Bck
Porch
CLK
4or.
Syth
Vert.
Vert.
No.
Total
Display
CLK
No.
Line
No.
Line
No.
Vert.
Bak
Porch
Line
No.
Vert.
Syc
Width
Line
No.
85.5
1792
1360
256
112
795
768
18
6
73.25
1496
1366
58
32
816
768
41
5
and the frequencies
are displayed
38
on the screen may not exactly
same as
ii¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸
iiii!!!!!!i?!¸¸iii̧¸'!iiiii
¸_¸¸¸
ii 'i_¸¸¸¸¸¸¸¸¸
_
Panel
TV Function
Video
Audio
Audio
Input
26" LCD Panel
Aspect Ratio
16:9
Resolution
1366 x 768
Display colors
16.2M colors
Viewing Angle (CR>10)
170°Hor.
Broadcasting
Analog : NTSC
System
Feature
/
170 °
Ver.
(typ.)
M/N
Digital : ATSC/Clear QAM
Receiving Channel
Analog : PLL181Ch., CATV 125Ch
Digital : 54M Hz~864M Hz
Sound System
Analog : Multi-channel TV Sound
Digital : Multi-Track
Resolution
Analog : 486i
Digital : 1989i, 720p,486p, 480i
Data Broadcasting
Close Caption,
Composite Signal
CVBS
x2
Component Signal
Y Pb Pr
x 1
HDMI Connection
HDMI
x2
VGA
D-Sub 15 pin
Connection
Sound
V - Chip
(720P / 1086i, HDTV ready )
xl
31.5~60KHz
/
fv=56~75Hz
Scanning Frequency
fH
Audio 1
Composite
Audio 2
Component
Audio 3
HDMI to DVI
x 1
xl
Audio 4
PC jack in
xl
Speaker (build-in)
10W + 10W (Average)
Input
Output
iiiii/iiii iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiilii;¸ ?¸¸¸:
i!_iii
ii'i!!!!_ _?¸¸¸_¸¸
iiiiiill
iiilil
¸¸¸¸¸
¸¸¸¸¸
_il!
_i
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii,
Screen Size
x2
RCA Out
Left / Right
Digital Audio Out
SPDIF (DTV).
Function Keys
Menu,
Video Performance
3D Comb-filter,
+/-(Volume),
Up/Down(Channel),
3D De-interlace
Source, Power
, Aspect Ratio Control (ARC),
Auto Picture Control, Noise Reduction
Other Control
Sleep Timer, Timer On, Timer Off
AC 100V ~ 249V, 50 / 60Hz (SK-26H540S)
Power Supply
Power
AC 120V • 50 / 60Hz (SK-26H730S)
Power Consumption
Wall Mount
Dimension
< 200 W
For use only UL Listed Wall mount Bracket or F4030 Wall Mount Bracket
655 mm * 505 mm * 175 mm (SK-26H540S)
WxHxD
639 mm * 470 mm * 213 mm (SK-26H730S)
Weight
(net)
Without
Accessories
11 Kg (SK-26H546S)
9 Kg
(SK-26H730S)
3P
www, wde,com
WestinghouseDigital Electronics
Santa FeSprings, CA
E030057363
SE=UM=2608=0701