Download IPOD-DOCK-MBQ
Transcript
Model: IPOD-DOCK-MBQ Installation and User Manual Any model of IPOD with a dock connector can fit perfectly into a single IPOD-DOCK-MBQ through the use of Interchangeable Dock Adapters and an Insert. Dock Housing connects to any cable with an IPOD dock connector. Installation The IPOD-DOCK-MBQ has 2-way mounting capability: Surface or Dash mount. The housing can be installed vertically or horizontally. Choose a mounting location that provides easy access for the user. Vertical Mount Horizontal Mount Dash Mounting: 1. Use the enclosed IPOD-DOCK-TEMPLATE to mark where you want to mount the Docking Station. Note 1: Make sure there is enough room behind the dash to mount the Dock Housing. Note 2: When cutting the hole into the dash make sure there are no cables or wires that can be accidentally cut. 2. Secure the Dash-Mount Housing to the Dock Housing using the supplied screws. 3. Secure the Dock Housing to the dash using the supplied mounting screws. 4. Snap-on the Bezel. 5. Attach the IPOD connector to the bottom of the housing. 4. Snap-on Bezel 3. Mounting Screws (supplied) Surface Mounting: 1. Secure the Dock Housing in place by using the supplied mounting screws. 2. Attach the IPOD connector to the bottom of the housing. Mounting Screws (supplied) Dash-Mount Housing 2. Housing Screws (supplied) Dock Housing 1. Hole in Dash Dock Housing IPOD Connector Cable Model: IPOD-HAR-6-MBQ or IPOD-HAR-13-MBQ (not supplied) 5. IPOD Connector Cable Model: IPOD-HAR-6-MBQ or IPOD-HAR-13-MBQ (not supplied) Installation and User Manual Model: IPOD-DOCK-MBQ Adapters and Insert Use the diagram below to choose the Adapter/Insert that fits your IPOD. Identify the adapters by the labels on the back of the adapter housing. Inserting Adapter Push the release lever, then insert adapter into housing NANO (Gen 2) Adapter NANO (Gen 3) Adapter IPOD Classic Adapter Changing Adapter Push the release lever, then remove adapter from housing Insert with ITOUCH Side Facing Out Insert with IPHONE Side Facing Out Cover Place insert toward back of adapter. Then insert ITOUCH or IPHONE IPOD Classic Adapter © Copyright 2008 MB Quart Patent Pending When not in use place cover on dash mounted docking station to keep out dirt and moisture. IPOD Classic Adapter IPOD-DOCK-MBQ-INS Rev. A 10-31-07