Download Model 8806 8808 USER`S MANUAL

Transcript
6. Using On-Screen Menu
[WEP] (required for wireless only)
Select this option whether using the WEP (Wired Equivalent Privacy) key for encryption or not. To use encryption,
specify WEP key.
Disable .................. Will not turn on the encryption feature. Your communications may be monitored by someone.
64bit ...................... Uses 64-bit datalength for secure transmission.
128bit .................... Uses 128-bit datalength for secure transmission. This option will increase privacy and security when compared to use of 64-bit datalength encryption.
152bit .................... Uses 152-bit datalength for secure transmission. This option will increase privacy and security when compared to use of 128-bit datalength encryption.
NOTE:
• The WEP settings must be the same as communication devices such as PC or access point in your wireless network.
• When you use WEP, your image transmission speed will slow down.
Key Select:
Selects one key from the four keys below when selecting [64bit], [128bit] or [152bit] in [WEP].
Key1-4:
Enter encryption key when selecting [64bit], [128bit] or [152bit] in [WEP].
Up to 5 characters can be set in 64 bit, up to 13 characters in 128 bit and up to 16 characters in 152 bit. Press the
[HEX] button to change to [ASCII] to set the key in ASCII digit. You can toggle this button between [ASCII] and
[HEX].
The key can also be set in hexadecimal digit.
* Enter 0x(numeral and alphabet respectively) right in front of your key code.
* Hexadecimal uses 0 to 9 and A to F.
* When setting in a hexadecimal digit, up to 10 characters can be set in 64 bit, up to 26 characters in 128 bit and
up to 32 characters in 152 bit.
93
http://www.pureglare.com.au