Download Model 8806 8808 USER`S MANUAL

Transcript
6. Using On-Screen Menu
Menu Descriptions & Functions [Reset]
Returning to Factory Default
The Reset feature allows you to change adjustments and settings to the factory preset for sources by the following
methods:
[Current Signal]
Resets the adjustments for the current signal to the factory preset levels.
All the items in [Adjust] can be reset.
[All Data]
Reset all the adjustments and settings for all the signals to the factory preset except [Entry List], [Language],
[Background], [Control Panel Lock], [Menu Lock], [Logo Lock], [Security], [PJLink], [LAN Mode], [Projector Name],
[Communication Speed], [Date, Time Preset], [Lamp Life Remaining], [Lamp Hours Used], [Filter Hours Used] and
[Projector Hours Used].
[All Data (Including Entry List)]
Reset all the adjustments and settings for all the signals to the factory preset except [Language], [Background],
[Control Panel Lock], [Menu Lock], [Logo Lock], [Security], [PJLink], [LAN Mode], [Projector Name], [Communication Speed], [Date, Time Preset], [Lamp Life Remaining], [Lamp Hours Used], [Filter Hours Used] and [Projector
Hours Used].
Also deletes all the signals in the [Entry List] and returns to the factory preset.
NOTE: Locked signals in Entry List cannot be reset.
Clearing Lamp Hour Meter [Clear Lamp Hours]
Resets the lamp clock back to zero.
NOTE: Elapsed time of the lamp use will not be affected even when [Reset] is done from the menu.
NOTE: The projector will turn off and go into standby mode after 2100 hours (up to 3100 hours in Eco mode) of service. In this
condition you cannot clear the lamp hour meter on the menu. If this happens, press the HELP button on the remote control for 10
seconds to reset the lamp clock back to zero. Do this only after replacing the lamp.
Resetting the Filter Usage Hours [Clear Filter Hours]
Resets the filter usage back to zero.
NOTE: Elapsed time of the filter use will not be affected even when [Reset] is done from the menu.
107
http://www.pureglare.com.au