Hardware Manual - RTD Embedded Technologies, Inc. Download

Transcript
Note The +3.3 V pins (10 and 12) on the auxiliary power connector (CN3) are connected to the +3.3 V
pins on the PC/104-Plus bus by default. These pins are also configured to supply +3.3V to FP_VCC on the
LVDS Flat Panel Video connector (CN19).
Note For more information on configuring the +3.3V pins on the auxiliary power connector (CN3) the
PCI bus connector (CN16), or the LVDS FLat Panel Video connector (CN19), contact RTD Technical
Support.
Facing the connector pins, the pinout of the Auxiliary Power connector is:
BDM-610000063
Rev F
11
9
7
5
3
1
PSON#
GND
GND
Reserved
+5V_STDBY
GND
+3.3 V
+3.3 V
+5 V
–12 V
+12 V
+5 V
12
10
8
6
4
2
Chapter 3: Connecting the cpuModule
27