USER MANUAL Download

Transcript
USER MANUAL
62
_____________________________________________________________________________________________________________________
17.16
5
Paperweight calculation (PAP)
This function enables to calculate paperweight of 1m2 of
paper basing on samples of known area. For quick
access, the function is accessible directly by pressing
MENU key.
0
g
The balance must be tared just before the measurement.
Place the specific sample quantity of the same area
(possible values: 1, 2, 5, 10, 20, 50, 100).
Press MENU key to access Function Menu. To enter the
function press T key when PAPEr is displayed.
Following options show on the display:
- PAP oFF – turn off the function,
- PAP on – turn on,
- PAP n – inscribing number of paper pieces on pan,
- PAP ArE – inscribing surface of single piece (in m2)
Press T key when PAP n and PAP ArE is displayed.
Enter number of samples using:
0 -increasing digit,
T - next digit,
MENU – end of inscribing.
Press T key when PAP ArE is displayed. Enter area
of a single sample (as above).
The result of paperweight measurement is finished with
„o” mark pointing g/m2 unit.
In order to finish work with function press MENU and then
using T key choose PAPEr and PAP oFF
Note:
“PAP Err” communicate marks that wrong values were
inscribed in PAP n or PAP ArE.