3GV19005USABed01.fm Page 3 Dimanche, 15. juillet 2007 3:22 15 US NOEADGR060-000 Contains several lines and pages providing information on calls and the features accessible via the 6 keys associated with the words on the screen. Forward icon: pressing the key next to this icon allows you to program or change the forward feature. Indicator light Receiver • • Flashing green: incoming call Flashing orange: alarm NOEADGR010-055 NOEADGR010-056 AADGR010-000 NOEADGR010-010 NOEADGR020-010 NOEADGR020-020 NOEADGR020-050 NOEADGR020-060 AADGR030-000 NOEADGR050-020 AADGR040-000 3 NOEADGR050-030 NOEADGR050-040 AADGR020-000 NOEADGR020-030 NOEADGR040-010 NOEADGR020-040 AADGR050-000 NOEADGR030-015 Silent mode enabled. Telephone locked. Modifying your personal code Custo Option OR Reach the 'menu' page Navigation OK key: used to validate your choices and options while programming or configuring. Left-right navigator: used to move from one page to another. Up-down navigator: used to scroll through the content of a page. h old transfer r edial end Back/Exit key: to return to previous menu (short press) or return to first screen (long press) ; during a conversation, provides access to welcome screens (Menu, Info, etc. ) and to return to the conversation icon screens. Passwd Set Follow informations displayed on the screen Lock / unlock your telephone Lock Welcome screens Menu page: contains all functions and applications accessible via the keys associated with the words on the Main pers. Menu Info screen. Main page: contains call line keys (allowing supervision of calls) and programmable call keys (Not available in 'safe' mode). Info page: contains information on the telephone and the status of its functions: name, telephone number, number of messages, activation of transfer function, appointment reminder, etc. bc 3d jkl 6 2a 5 Reach the 'menu' page ef o mn Depending the displayed informations, enter your password or confirm Your telephone is locked/unlocked Call display Socket for connecting headphones or a handsfree/speaker unit Alphabetic keypad Adjusting the audio features Incoming call. Call in progress or outgoing call. Audio keys Handsfree/Speaker Key: to make or answer a call without lifting the receiver. • lit in handsfree mode or headset mode (short press). • flashing in speaker mode (long press). Intercom/Mute key: • During a call: press this key so that your party cannot hear you. • Terminal idle: press this key so that you can automatically answer a call without lifting the receiver. To adjust the speaker or receiver volume up or down Custo Set Call on hold*. END key: to terminate a call. Reach the 'menu' page Ringing If you get two calls at the same time, you can switch from one call to the other by pressing the display key associated with each call. Adjust ringing (melody, volume, mode,...) by following instructions displayed on the screen Left-right navigator: used to check calls. Adjusting screen brightness Feature keys and programmable keys Custo Cntrst Set Guide key: used to obtain information on features of the 'menu' page and to program key of the 'main' page. Messaging key to access various mail services If the key flashes, a new voice message or a new text message has been received. Extension unit www.alcatel-lucent.com NOEADGR050-010 Appointment programmed. Display keys: pressing a display key activates the feature shown associated with it on the screen. Alcatel-Lucent IP Touch 4028 Phone NOEADGR040-050 Alcatel-Lucent IP Touch 4028 Phone / 4029 Digital Phone Adjust the tilt of the screen NOEADGR040-040 Receiver connected. Customize your terminal. The customization features of the telephone are accessed from the Menu page. An extension unit can be fitted to your telephone. This provides additional keys which can be configured as feature keys, line keys, call keys etc. To affix labels: push the holding strip of the unit backwards to you and lift it. Install the label under the keypad, in the housing designed for, and place the keypad back into position. 'Redial' key: To access the 'Redial' feature. Hold: the call is placed on hold. Transfer: Transfer the call to another number. ! To avoid accidentally damaging the set telephone line connector, make sure you position the cord correctly in the compartment intended for this purpose. This symbol indicates the features that can be accessed in 'safe' mode. According to the configuration the telephone system of your company, your phone set can automatically switch to 'safe' mode in case of loss of connection with the system, in order to ensure continuity of service. For more information, contact your installer or administrator. Please refer to the user manual for features in 'safe' mode. The 'safe' mode is only available for 8 Extended Edition Series. Reach the 'menu' page Screen OR Increase or decrease the contrast American Other Display and display keys 3GV19005USABed01.fm Page 4 Dimanche, 15. juillet 2007 3:22 15 Forward your calls to another number Using your telephone NOEADGR030-020 During a call Pre-programmed feature keys are disabled in 'safe' mode. Use MENU keys to access theses features. Pre-programmed feature keys are disabled in 'safe' mode. Use MENU keys to access theses features. Identifying the terminal you are on The number of your telephone is displayed on the 'Info' page. NOEADGR030-050 Placing a call on hold (HOLD) Forwarding your calls to another number / Your mailbox Access the Info page using the navigator. During a call, you may place the call on hold and recover it later, on the same telephone. 10:30 h old Making a call NOEADGR070-000 OR OR 5 NOEADGR070-010 Lift the receiver Handsfree Programmable line key 3d 6 o mn Calling a second person during a call During a call, you can call a second person (consultation call): If necessary, confirm cancellation of the diversion Press the key next to 'cancel or deactivate the diversion' To make an external call, dial the outside line access code (9) before dialing your party's number. 4 Answering a call OR menu Handsfree info 5 transfer bc 3d jkl 6 2a 5 Press 'transfer' key Follow informations displayed on the screen ¤Callback 10:30 Main PERS. Voice message service ¤Conf … pers. Main Follow informations displayed on the screen OR Make calls via your programmed call keys pers. Main If the key flashes, a new voice message or a new text message has been received. 10:30 Follow informations displayed on the screen PNC Press the key next to 'review voice or text message' ‡3GV19005USAC010919˙ÌÍ‰ 5 3d 6 ef o mn Name of second party transfer ef o mn Press to perform the transfer During a call, to establish a three-way conference: Press a call key (not programmed) or a programmable key (f1 or f2) Reviewing your voice mailbox bc jkl 2a OR Three-way conference Enter the first letters of the last name Programming your call keys Hang up ef o mn Number of second party Dial the number to be called Helen PERS. Main Select the party you want to call from the programmed call keys Call the selected party bc 3d jkl 6 2a 5 The number you are calling is busy 6 Transferring a call Using dial by name Making a callback request to a busy number 3d During a call, you may transfer the call to another number. Press the key next to the 'incoming call' icon Last number redial bc jkl 2a This feature does not allow transfer or conference. Certain features of this section depend on your telephone system, contact your installer or consult the appropriate User Guide (*). Redial main Paul Directory Paul is calling Lift the receiver 10:30 h old The first call is placed on hold OR Press the 'hold' key to recover the call on hold The call is placed on hold When you return, cancel all forwarding Dial the number for your call info Follow informations displayed on the screen ef bc jkl 2a OR main Paul Press the key associated with the type of diversion required (immediate, if busy, if no reply etc.) NOEADGR030-060 menu Press the “conference” key ef ¤Conf o mn Number of second party Press to establish the threeway conference Compliance This document describes the services available on telephones Alcatel-Lucent 4028 Phone/4029 Digital Phone connected to an Alcatel-Lucent OmniPCX Office or Alcatel-Lucent OmniPCX Enterprise Communication Server system. For more information, please consult the User Guide for your 4028 Phone (IP set) or 4029 Digital Phone (digital set). Contact your installer Warning: never place your telephone in contact with water. To clean your telephone, you may however use a damp soft cloth. Never use solvents (trichlorethylene, acetone, etc.) which may damage the plastic parts of your telephone. Never spray it with cleaning products. Earpiece may retain magnetic objects. The wording is not contractual and may be subject to change. Some functions of your telephone are controlled by a software key and the configuration of the unit. This equipement has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. This Class B digital apparatus complies with Canadian ICES-003. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed ans used in accordance with the instructions, may cause harmful interference to radio communications. If this equipment does cause harmful interference, please contact your installer. Collection of these products at the end of their product life must be done selectively. Alcatel, Lucent, Alcatel-Lucent and the Alcatel-Lucent logo are trademarks of AlcatelLucent. All other trademarks are the property of their respective owners. The information presented is subject to change without notice. Alcatel-Lucent assumes no responsibility for inaccuracies contained herein. Copyright © 2009 Alcatel-Lucent. All rights reserved.