Download V-Blue user manual - IMS Groups

V-Blue user manual
NOTE
Please read this manual and download the demo video before usage!
1.)
Make sure the phone has a fully charged battery.
2.)
Make sure the battery used for the clip is also okay
3.)
Connect battery to clip (blue and red LED should be ON)
4.)
Remove sim card from phone.
5.)
Power on the phone.
6.)
Insert the clip and press shortly the red button.
7.)
Wait few seconds until your phone will get an black screen with the letters “Boot Mode”
8.)
The blue LED will blink twice shortly.
9.)
The phone will restart, please keep the clip still connected !!!
10.)
After 5 seconds, the phone will restart again.
11.)
After the second restart, you should wait until you see again the normal screen with the
message “Insert Sim Card
12.)
Now you can disconnect the clip, phone is unlocked.
NOTE: Do not disconnect the clips during or before the second time boot sequence is
finished