Download SLX-18MG-1 Data Sheet

even under the toughest conditions.
PRODUCT HIGHLIGHTS
n
18 ports including 2 flexible Gigabit combo ports
that can be RJ45 copper or fiber optic
SLX-18MG-1 Industrial Ethernet Switch
n
High port count in a small footprint
PRODUCT DATASHEET
Sixnet Networking
Series
Easy to configure management functions
n
Truly rugged design with -40 to 75°C operation
SLX-18MG-1
PRODUCT DATASH
SLX-18M
n
REAL-TIME SECURE PERFORMANCE
Managed
18-Port Industrial Ethernet
Switch
Real-Time-Ring™ or Rapid Spanning Tree (RSTP)
Two Flexible
Combination Gigabit Ports
18
PORT
INDUSTRIAL
ETHERNET
MANAGED SWITCH
for fast redundant ring orETHERNET
mesh networks
18 PORT INDUSTRIAL
MANAGED
SWITCH
Your choice – Just connect
to the RJ45 for a
n
n
SNMPv1 and v2 network management
10/100/1000Mbps auto-detecting copper link or plug in
a fiber transceiver
formanaged
a 100 or 1000Mbps noise-immune
The SLX-18MG
isfor
ansecurity
18 port industrial
Ethernet
SNMPv3 authentication
& encryption
fiber link. These advanced ports give you the flexibility
The SLX-18MG is an 18
port industrial
Ethernet
managed
switch
with
fast
combination
ports
n SNMP notifications
(traps)
for 16
report
on and
event 2 Gigabit
you need and make your jobthat
easier!
switch with 16 fast and
2 Gigabit support
combination
ports operation
that
n Priority Queuing
both
copper
and fiber optic connections. This
(QoS/CoS)
for real-time
n
support both copper n and
optic
connections.
IGMPfiber
for Multicast
filtering
switch
is (snooping
designed& querying)
toThis
be rugged, reliable, real-time and
VLAN
for convenient
traffic
segregation
switch is designed ton be
rugged,
reliable,
real-timecompact
and DIN rail packaging, protected
secure.
It combines
n Broadcast & multicast storm protection
circuitry
and powerful
software to keep your system going
secure. It combines compact
DIN rail
packaging,
protected
n RMON & port mirroring for advanced diagnostics
even your
undersystem
the toughest
circuitry and powerful software
to keep
goingconditions.
n Security with HTTPS, SSL, SSH, SNMPv3 & more
even under the toughest
conditions.
PRODUCT
HIGHLIGHTS
n Easy configuration
via Web, Telnet
or CLI
n Free field-installable
upgrades
forever2 flexible Gigabit combo ports
n firmware
18 ports
including
PRODUCT HIGHLIGHTS
n
that
TROUBLE FREE OPERATION
can be RJ45 copper or fiber optic
18 ports including 2 flexible Gigabit combo ports
n -40 to +75 °C operating
n High
rangeport count in a small footprint
that can be RJ45
copper or fiber optic
n UL/CSA (CUL), CE and Hazloc (Zone 2) rated
18 PORT INDUSTRIAL ETHERNET
SWITCH
n TrulyMANAGED
rugged design with
-40 to 75°C operation
n
High port count in(PENDING)
a small footprint
n
n Easy to
Dual (redundant) power
inputs
ETHERNET
PERFORMANCE
n Truly
rugged design
n
SLX-18MG-1
configure management functions
with -40 to 75°C operation
Industrial surge and spike protection
STANDARDS COMPLIANCE
n Electrical safety – UL508 / CSA C22.2/14; EN61010-1, CE
REAL-TIME SECURE PERFORMANCE
18 Ethernet ports including 2 Gigabit
n Self-test/alarm
outputfunctions
contact
Easy
to
configure
management
n EMC – FCC part 15, ICES-003; EN61000-6-4, EN61000-6-2, CE
Managed, store & forward, wire-speed n
Real-Time-Ring™ or Rapid Spanning
Tree (RSTP)
n DIN rail or direct panel mounting
n Hazardous locations Two
Flexible
Combination
Gigabit
Ports
n All IEEE 802.3 Ethernet
– UL1604
/ CSA
C22.2/213 (Class
I, Div.
2);
protocols supported
for fast redundant ring or mesh networks
REAL-TIME
SECURE
PERFORMANCE
choice
Just connect to the RJ45 fo
EN60079-15 (Zone 2,Your
Category
3), CE–(ATEX)
n RJ45 ports 1 - 16 (shielded) 10/100BaseTX
n SNMPv1 and v2 network management
n n RJ45 ports 17 - 18SOLUTIONS
for
marine and offshore
per ABS
10/100/1000Mbps
auto-detecting
copper link or plu
(shielded)
10/100/1000BaseTX
FOR
YOUR
INDUSTRIAL
NETWORKING
Real-Time-Ring™
or Rapid
Spanning
Tree
(RSTP) CHALLENGESn Maritime – designed WWW.SIXNET.COM
Two Flexible
Combination
Gigabit
Ports for a 100 or 1000Mbps noise-imm
n RoHS
n RJ45 port speed auto-negotiation
and
WEEE
compliant
a
fiber
transceiver
SNMPv3 authentication & encryption for security
for fast redundant ring or meshnnetworks
n ISO9001:2000
Your choice
– Just certified
connect
to These
the advanced
RJ45 forports
a give you the flexi
n RJ45 MDI/MDIX auto-crossover
company
fiber
link.
n SNMP notifications (traps) for report on event
n n RJ45
SNMPv1
v2 network management
you
need
and
make
your
job
easier!
TD andand
RD auto-polarity
10/100/1000Mbps
auto-detecting
copper
link
or
plug
in
PHYSICAL
n Ports 17 and 18 are combination gigabit
thatQueuing
have both(QoS/CoS)
a RJ45
n ports
Priority
fortransceiver
real-time operation
a fiber
a 100
1000Mbps noise-immune
n DIN rail or for
n SNMPv3 authentication & encryption for security
direct
panelor
mounting
connector and SFP fiber connector. For each of these ports, only one
fiber
link.
These
advanced
ports
give you the flexibility
n Case
n IGMP for Multicast filtering (snooping
– Corrosion-resistant aluminum
& querying)
n ofSNMP
the connectors
can be used
at afor
time.
notifications
(traps)
report on event
n and
you
need
make
your
job
easier!
Ingress protection – IP40
n VLAN transceivers
for convenient traffic segregation
n SFP (pluggable) ports 17 - 18 accept mini-GBIC
n Weight – 0.34 kg (12 oz.)
n Priority Queuing (QoS/CoS) for real-time operation
n Fiber
optic port speed: 100 Mbps or 1000
Mbps
n Broadcast
& multicast storm protection
n Dimensions – see mechanical diagram
n n Fiber typical specs (see separate datasheet for details)
IGMP for Multicast filtering (snooping
&
querying)
n RMON & port mirroring for advanced diagnostics
All specifications are subject to change. Consult factory for latest info.
p Multimode, 0.55 km, 850 nm, 50-62.5/125 µm
for convenient
traffic
n pVLAN
Singlemode,
10 km, 1310
nm,segregation
9-10/125
µm with HTTPS, SSL, SSH, SNMPv3 & more
n Security
MECHANICAL DRAWING
n p Long haul, up to 120 km, 1550 nm, 9-10/125 µm
Broadcast & multicast storm protection
n Easy configuration via Web, Telnet or CLI
4.30"
n Typical latency (varies on load & settings)
n Free diagnostics
port16
mirroring
fortime
advanced
field-installable firmware upgrades forever[10.92 cm]
n pRMON
@ 10 &
Mbps:
us + frame
p @ 100 Mbps: 5 us + frame time
n Security with HTTPS, SSL, SSH, SNMPv3 & more
TROUBLE
FREE OPERATION
Snaps to
n Full or half duplex operation configurable
per port
standard
Removable
n n MAC
Easy
configuration
via8192
Web, Telnet
ortoCLI
addresses
supported
n -40
+75 °C operating range
DIN Rail
Screw Block
n Memory bandwidth 32 Gbps
EN50022
n UL/CSAforever
n Free field-installable firmware upgrades
(CUL), CE and Hazloc (Zone
2) rated
(35 mm)
n Ethernet isolation 1500 VRMS 1 minute
(PENDING)
n Console ports – USB and RS232 (RJ45)
n
n
n
TROUBLE FREE OPERATION
ETHERNET COMPLIANCE
n
n
n
Dual (redundant) power inputs
5.52"
cm]
-40 to +75 °C operating range n newer
Industrial
surge and spike [14.02
protection
IEEE 802.3u (Fast Ethernet 100Mbps for
devices)
Removable DIN
clip for direct
panel mounting
IEEE
802.3 (10Mbps
supports
devices)
UL/CSA
(CUL), Ethernet
CE and
Hazloc
(Zone
2) rated
nlegacy
Self-test/alarm
output contact
IEEE
802.3x (Full-Duplex with Flow Control)
(PENDING)
n DIN rail or direct panel mounting
n IEEE 802.1D/w (Rapid Spanning Tree for
redundant rings and
Panel mounting ears
n Spanning
Dual (redundant)
power
inputs
Tree for interoperability)
accept up to
a #12 screw
n IEEE 802.1p (Priority Queuing – QoS, CoS, ToS/DS)
n Industrial surge and spike protection
SOLUTIONS FOR YOUR INDUSTRIAL NETWORKING CHALLENGES
n IEEE 802.1Q (VLAN for traffic segregation)
nn
6.02"
[15.29 cm]
n
Self-test/alarm output contact
REAL-TIME-RING™
4.69"
[11.92 cm]
n
nn
n
n
DINloss
railrecovery:
or direct
mounting
Link
30panel
mS plus
5 mS per hop
Switches in a ring: <50 for best performance
Multiple rings supported (configurable)
See the User Manual for a More Detailed Diagram
ORDERING GUIDE
SOLUTIONS
FOR YOUR INDUSTRIAL NETWORKING CHALLENGES
“OK”
ALARM OUTPUT
SLX-18MG-1
n
n
n
Indicates power & operational status
Voltage same as switch input voltage
Maximum current output 0.5 Amp
POWER INPUT
n
n
Redundant input terminals
Reverse polarity protection
WWW.SIXNET.C
2.88"
[7.31 cm]
WWW.SIXNET.COM
18 port industrial
Ethernet switch
GMFIBER-SFP-500
Gigabit SFP fiber transceiver, mm, 550 m
GMFIBER-SFP-2K
Gigabit SFP fiber transceiver, mm, 2 km
GSFIBER-SFP-10K
Gigabit SFP fiber transceiver, sm, 10 km
GSFIBER-SFP-30K
Gigabit SFP fiber transceiver, sm, 30 km
Electrical safety – UL508 / CSA C22.2/14; EN61010-1, CE
18 Ethernet ports including 2 Gigabit
GSFIB
n
Input –power
all portsEN61000-6-4,
active)
n EMC
FCC (typical
part 15,with
ICES-003;
EN61000-6-2, CE
Managed, store & forward, wire-speed
GSFIB
p
n Hazardous
8 W (w/locations
no fiber plugged
in) / CSA C22.2/213 (Class I, Div. 2);
n All IEEE 802.3 Ethernet protocols supported
– UL1604
p
10 W (w/(Zone
2 fiber2,plugged
in)3), CE (ATEX)
EN60079-15
Category
n RJ45 ports 1 - 16 (shielded) 10/100BaseTX
FMFIB
n Maritime
n
n RJ45 ports 17 - 18 (shielded) 10/100/1000BaseTX
– designed
for marine
Power input
voltage 10-30
VDC and offshore per ABS
FSFIB
n RoHS
n
n RJ45 port speed auto-negotiation
andprotection
WEEE compliant
Transient
15,000 watts peak
18 PORT INDUSTRIAL
ETHERNET MANAGED SWITCH
SLX-18MG-1
n
n RJ45 MDI/MDIX auto-crossover
company
n ISO9001:2000
FSFIB
Spike protectioncertified
5,000 watts
(10x for 10 uS)
n RJ45 TD and RD auto-polarity
PHYSICAL
STANDARDS
COMPLIANCE
ETHERNET PERFORMANCE
ENVIRONMENTAL
FSFIB
n Ports 17 and 18 are combination gigabit ports that have both a RJ45
n DIN
rail –
orUL508
direct
panel
mounting
n Electrical
n 18 Ethernet ports including 2 Gigabit
safety
/
CSA
C22.2/14;
EN61010-1,
CE
n
Operating
temperature:
connector and SFP fiber connector. For each of these ports, only one
n Case – Corrosion-resistant aluminum
n EMC
n Managed, store
– FCC
partto15,
ICES-003;
EN61000-6-2, CE
p
forward, wire-speed
-40
+75
°C (cold EN61000-6-4,
startup at -40 °C)
of the&connectors
can be used at a time.
n Ingress protection – IP40
ET-PSn Hazardous
n All IEEE n802.3
locations
– UL1604
/ CSA
C22.2/213 (Class I, Div. 2);
n Storage
protocols
supported
temperature
-40 to
+85 °C
SFPEthernet
(pluggable)
ports 17
- 18 accept mini-GBIC transceivers
n Weight – 0.34 kg (12 oz.)
EN60079-15
(Zone
2,
Category
3),
CE
(ATEX)
n RJ45 ports
n
SP-ETH
n 1
16
(shielded)
10/100BaseTX
Humidity (non-condensing) 5 to 95% RH
Fiber optic port speed: 100 Mbps or 1000 Mbps
n Dimensions – see mechanical diagram
n Maritime
n RJ45 ports
– designed
for marine
andisoffshore
per ABS
n 17
- 18
(shielded)
(optional
conformal
coating
available)
Fiber
typical
specs 10/100/1000BaseTX
(see separate datasheet for details)
n RoHS
All specifications
subject
change. Consult
speed
p
n RJ45 port
WEEEare
compliant
n and
Multimode,
0.55 km, 850 nm, 50-62.5/125 µm
auto-negotiation
Vibration
and
shock:toIEC60068-2-6,
-27factory for latest info.
18 PORT
ETHERNET MANAGED SWITCH
SLX-18MG-1 RJ45-D
n ISO9001:2000
p INDUSTRIAL
n RJ45 MDI/MDIX
certified
company
Singlemode,
10 km, 1310 nm, 9-10/125 µm
n Maximum
auto-crossover
Operating
Altitude: 30,000 ft.
MECHANICAL
DRAWING
p RDLong
haul, up to 120 km, 1550 nm, 9-10/125 µm
n RJ45 TD
and
auto-polarity
NOTE: C
PHYSICAL
4.30"
STANDARDS COMPLIANCE
(varies gigabit
on load ports
& settings)
ETHERNET
PERFORMANCE
n Ports
17 nandTypical
18
arelatency
combination
that have both a RJ45
n DIN rail or direct panel
[10.92
cm]
mounting
p
@ 10
Mbps:
16 us +2
frame
time
n Electrical safety – UL508 / CSA C22.2/14; EN61010-1, CE
n 18and
connector
SFP
fiber
connector.
For
each
of these ports, only one
Ethernet
ports
including
Gigabit
n Case – Corrosion-resistant aluminum
p @ 100 Mbps: 5 us + frame time
331 Ushers
Road • Ballston
Lake, CE
NY 12019 • USA
n EMC – FCC part 15, ICES-003;
EN61000-6-4,
EN61000-6-2,
of then connectors
can
be&used
at a time.
Managed,
store
forward,
wire-speed
Snaps to
n Ingress protection
– IP40
• Fax +1.518.877.8346
•
n Full or half duplex operation configurable per port
n Hazardous
n SFPn(pluggable)
locationsRemovable
–+1.518.877.5173
UL1604 / CSA C22.2/213
(Class I, Div. 2); sales@s
ports 17
- 18 accept
mini-GBIC
transceivers
All IEEE 802.3
Ethernet
protocols
supported
standard
n Weight – 0.34 kg (12 oz.)
n MAC addresses supported 8192
DIN
Rail
n Fibern optic
EN60079-15
(Zone
2,
Category
3),
CE
(ATEX)
port
speed:
100(shielded)
Mbps or 1000
Mbps
RJ45
ports
1 - 16
10/100BaseTX
Screw Block
SOLUTIONS
FOR YOUR
INDUSTRIAL NETWORKING CHALLENGE
n Dimensions
n Memory bandwidth 32 Gbps
– see mechanical
diagram
EN50022
n Maritime
n Fibern typical
– designed for marine and offshore per ABS
specs
separate
datasheet
for details)
RJ45
ports (see
17 - 18
(shielded)
10/100/1000BaseTX
(35 mm)
n Ethernet isolation 1500 VRMS 1 minute
n RoHS
All specifications
are subject
to change.
Consult factory for latest info.
p nMultimode,
and WEEE
compliant
0.55
km,auto-negotiation
850 nm, 50-62.5/125 µm
RJ45
port
speed
n Console ports – USB and RS232 (RJ45)
n
n
SLX-18MG-1 Industrial Switch Specifications
n ISO9001:2000 certified company
µm
MECHANICAL
DRAWING
5.52"
6.02"
Removable DIN
9-10/125 µm
PHYSICAL
[14.02
cm]
[15.29 cm]
clip
for
direct
n
4.30"
IEEE
802.3u
Ethernet
100Mbps
newer
n Typical
n latency
load
& settings)
Ports
17(varies
and
18on(Fast
are
combination
gigabitfor
ports
thatdevices)
have both a RJ45
panel
mounting
n DIN rail
or direct
[10.92
cm] panel mounting
n IEEE 802.3 (10Mbps Ethernet supports legacy devices)
p
@ connector
10
Mbps: 16
usSFP
+ frame
and
fiber time
connector. For each of these ports, only one
n
Case – Corrosion-resistant aluminum
n
IEEE
802.3x
(Full-Duplex
with
Flow
Control)
p @ of
100
Mbps:
5 us + can
frame
the
connectors
betime
used at a time.
n Ingress
protection – IP40
n IEEE 802.1D/w (Rapid Spanning Tree for redundant rings and
Snaps
to
n Full or
n half
Panel mounting ears
duplex
operation
configurable
per port
SFP
(pluggable)
ports
17 - 18 accept
mini-GBIC transceivers
n
standard
Weight – 0.34
kg (12
oz.)
Spanning
Tree
for
interoperability)
Removable
accept
up to
n MACn addresses
supported
8192
Fiber optic
port speed:
100 Mbps or 1000 Mbps
DIN
Rail
n Dimensionsa–Screw
Block
#12
n IEEE 802.1p (Priority Queuing – QoS, CoS, ToS/DS)
seescrew
mechanical
diagram
n Memory
n Fiber
bandwidth
Gbps(see separate datasheet for details)
typical32
specs
EN50022
n IEEE 802.1Q (VLAN for traffic segregation)
2.88" info.
(35
mm)
n Ethernet
All
specifications
are
subject
to
change.
Consult factory for latest
pisolation
1500 VRMS
1 minute
Multimode,
0.55 km,
850 nm, 50-62.5/125 µm
4.69"
[7.31 cm]
REAL-TIME-RING™
n Console
pports
– USB and 10
RS232
(RJ45)
[11.92 cm]
Singlemode,
km, 1310
nm, 9-10/125 µm
MECHANICAL DRAWING
pn Link
loss
recovery:
30 mS
5 mS
hop
See the User Manual for a More
Detailed Diagram
Long
haul,
up to 120
km,plus
1550
nm,per
9-10/125
µm
5.52"
6.02"
ETHERNET COMPLIANCE
Removable DIN
n Switches
4.30"
in a(varies
ring: <50
for best
performance
n Typical
[14.02 cm]
[15.29 cm]
latency
on load
& settings)
clip for direct
n IEEE 802.3u (Fast Ethernet 100Mbps for newer devices)
n Multiple
rings supported
(configurable)
p
@ 10 Mbps:
16 us + frame
time
panel GUIDE
mounting[10.92 cm]
ORDERING
n IEEE 802.3 (10Mbps Ethernet supports legacy devices)
p ALARM
@ 100OUTPUT
Mbps: 5 us + frame time
“OK”
SLX-18MG-1
18 port industrial Ethernet switch
n IEEE 802.3x (Full-Duplex with Flow Control)
Snaps to
n Full
or half duplex
operation
configurable
per port
n Indicates
power
& operational
status
n IEEE 802.1D/w
GMFIBER-SFP-500
Gigabit SFP fiber transceiver, mm, 550 m
standard
(Rapid
Spanning
Tree
for
redundant
rings
and
Panel mounting ears Removable
n MAC
addresses
8192voltage
n Voltage
samesupported
as switch input
DIN
Railup to
ScrewSFP
Blockfiber transceiver, mm, 2 km
Spanning
Tree for interoperability)
accept
GMFIBER-SFP-2K
Gigabit
n Memory
bandwidth
32
Gbps
n
EN50022
current output 0.5 Amp
a #12 screw
n IEEE 802.1pMaximum
(Priority
Queuing
–
QoS,
CoS,
ToS/DS)
(35 mm)
n Ethernet isolation 1500 VRMS 1 minute
GSFIBER-SFP-10K
Gigabit SFP fiber transceiver, sm, 10 km
n IEEEPOWER
802.1Q INPUT
(VLAN for traffic segregation)
2.88"
n Console ports – USB and RS232 (RJ45)
4.69"
GSFIBER-SFP-30K
Gigabit SFP fiber transceiver,
sm,
30 km
n Redundant input terminals
[7.31
cm]
REAL-TIME-RING™
[11.92
cm]
5.52"
6.02"
ETHERNET
COMPLIANCE
n Reverse
Removable
DIN
polarity protection
SFP
fiber transceiver,
n Link loss recovery: 30 mS plus 5 mS per hop
[14.02
cm] User Manual
[15.29
cm] sm, 50 km
SeeGSFIBER-SFP-50K
the
forGigabit
a More
Detailed
Diagram
clip for direct
n Input
n IEEE
power
(typical
with all ports
active)for newer devices)
802.3u
(Fast
Ethernet
100Mbps
n Switches in a ring: <50 for best performance
panel mounting
GSFIBER-SFP-80K
Gigabit
SFP
fiber
transceiver,
sm, 80 km
p
8 W(10Mbps
(w/ no fiberEthernet
plugged in)
n IEEE 802.3
supports legacy devices)
n Multiple rings
(configurable)
p supported
ORDERING
GUIDE
10
W
(w/
2
fiber
plugged
in)
n IEEE
FMFIBER-SFP-4K
100Mb
SFP
fiber
transceiver,
mm,
4 km
802.3x (Full-Duplex with Flow Control)
n Power input voltage 10-30 VDC
n OUTPUT
“OK” ALARM
18
port
industrial
Ethernet
switch
IEEE
802.1D/w (Rapid Spanning Tree for redundant rings andSLX-18MG-1
FSFIBER-SFP-30K
100Mb
SFP fiber transceiver, sm, 30 km
Panel mounting
ears
n Transient protection 15,000 watts peak
Spanning
for interoperability)
n Indicates
accept up
to fiber transceiver, mm, 550 m
power &Tree
operational
status
GMFIBER-SFP-500
Gigabit
SFP
n Spike protection 5,000 watts (10x for 10 uS)
FSFIBER-SFP-60K
100Mb
a #12 screw SFP fiber transceiver, sm, 60 km
n IEEE
(Priority
n Voltage
same 802.1p
as switch
input Queuing
voltage – QoS, CoS, ToS/DS)
GMFIBER-SFP-2K
Gigabit100Mb
SFP fiber
mm,sm,
2 km
n
ENVIRONMENTAL
FSFIBER-SFP-100
SFP transceiver,
fiber transceiver,
1002.88"
km
IEEE
802.1Q
(VLAN
for
traffic
segregation)
n Maximum
current output 0.5 Amp
p
p
nSinglemode,
10 km, auto-crossover
1310 nm, 9-10/125
RJ45 MDI/MDIX
ETHERNET
COMPLIANCE
n
Long
haul,
to 120
km, 1550 nm,
RJ45
TDupand
RD auto-polarity
4.69"
n Operating temperature:
GSFIBER-SFP-10K
Gigabit SFP fiber transceiver, sm, 10 km[7.31 cm]
ACCESSORIES
POWERREAL-TIME-RING™
INPUT
[11.92 cm]
p -40 to +75 °C (cold startup at -40 °C)
n
GSFIBER-SFP-30K
Gigabit
SFPfor
fiber
transceiver,
sm, Diagram
302Akm
Link
lossterminals
recovery: 30 mS plus 5 mS per hop
n Redundant
See the User
Manual
a More
ET-PS-024-02
Power
supply
– ACDetailed
to 24VDC,
n input
Storage
temperature -40 to +85 °C
n Switches
in a(non-condensing)
ring: <50 for best
performance
n Reverse
polarity
protection
n
SP-ETH-2
Ethernet
surge sm,
& lightning
Humidity
5 to
95% RH
GSFIBER-SFP-50K
GigabitDual
SFPport
fiber
transceiver,
50 km
Multiple
rings
supported
(configurable)
n Inputnpower
(typical
with
all portscoating
active)
protecton for the 10/100 ports only
ORDERING GUIDE
(optional
conformal
is available)
GSFIBER-SFP-80K
Gigabit SFP fiber transceiver, sm, 80 km
p
8 ALARM
Wn(w/Vibration
no OUTPUT
fiber plugged
in) IEC60068-2-6, -27
and shock:
“OK”
RJ45-DB9F-CBL
Console
port cable,Ethernet
DB9 to RJ45
SLX-18MG-1
18 port industrial
switch
p 10 W
n (w/
2
fiber
plugged
in)
Maximum
Operating
Altitude:
30,000
ft.
FMFIBER-SFP-4K
100Mb SFP fiber transceiver, mm, 4 km
n Indicates power & operational status
GMFIBER-SFP-500
Gigabit
SFP
fiber
transceiver,
mm, 550 m
n Power input voltage 10-30 VDC
NOTE: Contact SIXNET for special or long haul transceivers up to 120 Km.
n Voltage same as switch input voltage
FSFIBER-SFP-30K
100Mb SFP fiber transceiver, sm, 30 km
n Transient protection 15,000 watts peak
GMFIBER-SFP-2K
Gigabit SFP fiber transceiver, mm, 2 km
n Maximum current output 0.5 Amp
n Spike protection 5,000 watts (10x for 10 uS)
FSFIBER-SFP-60K
100Mb SFP fiber transceiver, sm, 60 km
•
•
GSFIBER-SFP-10K
Gigabit
SFP fiber transceiver,
sm, 10 km
331
Ushers
Road
Ballston
Lake,
NY
12019
USA
Datasheet SLX-18MG-1
POWER INPUT
• [email protected] 100Mb SFP fiber transceiver, sm, 100
ENVIRONMENTAL
FSFIBER-SFP-100
km
Rev: 27
Aug, 2009
+1.518.877.5173 • Fax +1.518.877.8346
GSFIBER-SFP-30K
Gigabit SFP fiber transceiver, sm, 30 km
n Redundant input terminals
n Operating temperature:
ACCESSORIES
FOR
YOUR
INDUSTRIAL
NETWORKING
CHALLENGES
WWW.SIXNET.COM
n SOLUTIONS
Reverse polarity protection
GSFIBER-SFP-50K
Gigabit SFP fiber transceiver, sm, 50 km
p -40 to +75 °C (cold startup at -40 °C)
n Input power (typical with all ports active)
ET-PS-024-02
Power supply – AC to 24VDC, 2A
n Storage temperature -40 to +85 °C
GSFIBER-SFP-80K
Gigabit SFP fiber transceiver, sm, 80 km
p 8 W (w/ no fiber plugged in)
n Humidity (non-condensing) 5 to 95% RH
SP-ETH-2
Dual port Ethernet surge & lightning
p 10 W (w/ 2 fiber plugged in)
FMFIBER-SFP-4K
100Mb
SFP
fiber transceiver,
protecton
for the
10/100
ports only mm, 4 km
(optional
conformal coating is available)
n Power input voltage 10-30 VDC
n Vibration and shock: IEC60068-2-6, -27
FSFIBER-SFP-30K
100Mb
SFP fiber
sm, 30 km
RJ45-DB9F-CBL
Console
port cable,
DB9transceiver,
to RJ45
n Transient protection 15,000 watts peak
n Maximum Operating Altitude: 30,000 ft.
Americas
As the global experts in communication, monitoring and control for
n Spike protection 5,000 watts (10x for 10 uS)
FSFIBER-SFP-60K
100Mb SFP fiber transceiver, sm, 60 km
industrial
automation
and or
networking,
Red Lionuphas
been
[email protected]
NOTE:
Contact SIXNET
for special
long haul transceivers
to 120
Km.delivering
ENVIRONMENTAL
FSFIBER-SFP-100
SFP fiber
sm,Ethernet
100 km and
innovative
solutions for over100Mb
forty years.
Ourtransceiver,
automation,
Asia-Pacific
cellular M2M technology
enables companies worldwide to gain real-time
Operating temperature:
ACCESSORIES
•[email protected]
Ushers
Road
Lake, NY 12019 • USA
data visibility that drives productivity. ProductDatasheet
brandsSLX-18MG-1
include Red Lion,
p -40 to +75331
°C (cold
startup
at -40Ballston
°C)
27 Aug,2A
2009
+1.518.877.5173 • Fax +1.518.877.8346 • [email protected]
ET-PS-024-02
Power supply
– AC
to Rev:
24VDC,
N-Tron
and Sixnet. With headquarters
in York,
Pennsylvania,
the company
n Storage temperature -40 to +85 °C Europe
hasSP-ETH-2
offices across the Americas,
Asia-Pacific
and Europe.
Red Lion is
n Humidity
Dual port
Ethernet
surge
& lightning
5 to 95%Middle
RH
SOLUTIONS
FOR (non-condensing)
YOUR INDUSTRIAL
NETWORKING
CHALLENGES
WWW.SIXNET.COM
East
protecton for the 10/100 instrumentation
ports only
part of Spectris plc, the productivity-enhancing
and
(optional conformal coating is available)
Africa
w w wn . rVibration
edlio
n shock:
. n e tIEC60068-2-6,[email protected]
controls
company. For more Console
information,
visit to
www.redlion.net.
and
-27
RJ45-DB9F-CBL
port please
cable, DB9
RJ45
n Maximum Operating Altitude: 30,000 ft.
ADLD0207 041615 ©2015 Red Lion Controls, Inc. All rights reserved. Red Lion, the Red Lion logo, N-Tron and Sixnet are
+1 (717) 767-6511
Connect. Monitor. Control.
registered trademarks of Red Lion Controls, Inc. All other company and product names are trademarks of their respective owners.
NOTE: Contact SIXNET for special or long haul transceivers up to 120 Km.
n