Transcript
Wireless Remote Control Vibration Receiver / Vibrator Package Include: 1 x Vibration Receiver: Z-04 (Vibration Mode) 1 x Transmitter: C-1 1 x User manual Feature: Wireless control You can control the receiver with transmitter (remote control) from any place within a reliable distance; the wireless signal can pass through walls, floors and doors. Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code. One/several transmitters can control one/several receivers simultaneously. If you use two or more receivers in the same place, you can set them with different codes. Vibration Receiver: Model No.: Z-04 Mode: Vibration Decode: Fixed code by Soldering Power Supply: 2 x AAA 1.5V Battery (included) Size: 77mm x 38mm x 17mm Transmitter: Model No.: C-1 Channel: 1 CH Remote Control Distance: 100m / 300ft (theoretically) Encode: Fixed code by soldering Unit size: 58mm x 39mm x 16mm Power Supply: 1 x 23A -12V battery (included, can be used for 12 months) Usage: 1) Press and hold button: The receiver vibrates. 2) Release the button: The receiver stops vibration. Note: If you mount battery to receiver, it can continuously work 24~48 hours. So when you don’t use the product, please don’t mount battery to receiver. Front view Back view Vibrator On On LED Switch Switch Off Off _ + Code 2 1 0 0 2 1 0 0 H 2 x 1.5V Batteries Antenna _ C7 C6 C5 C4 C3 C2 C1 C0 L ANT + Mode of code H N L Code : 0 H N L Code : 1 SHENZHEN GUIYUAN INDUSTRY DEVELOPMENT CO.,LTD Http://www.carymart.com E-Mail: [email protected] H N L Code : 2
