Transcript
SleepTunez ™ Bluetooth Sleep Mask Speakers & Microphone USER MANUAL Features: 1. SleepTunez™ blocks out light while you enjoy your music, wirelessly. 2. Built-in microphone for hands-free telephone use, wirelessly. 3. Compatible with any Bluetooth-enabled device. 4. Soft, slow-recovery memory foam covered in microfiber is comfortable and relaxing. How to operate: 1. Press the ON/OFF button (about 5 sec) until the LED light blinks from blue-red. 2. Open Bluetooth settings in your device and pair with "SleepTunez" 3. After successful pairing, you can enjoy the wireless function of the built-in speakers. Pressing the ON/OFF button briefly will pause. 4. Press the ON/OFF button to ANSWER/END a phone call 5. Press & hold the ON/OFF button for 2-3 seconds will dial last number. 6. Press & hold the PREVIOUS button for VOLUME (-), press & hold the NEXT button for VOLUME (+). 7. While charging the red LED light will remain on. When charging has completed, the red LED light will turn off. 1. LED Light Indicator 2. Volume(+) / Next Track 3. ON/OFF & Play/Pause 4. Volume(-) / Previous Track Package Contents: Washing Instructions: 1 x SleepTunez™ Bluetooth eye mask Before washing, be sure to remove speakers & all 1 x Micro USB Charging cable electronic parts from the SleepTunez™ mask. Simply 1 x User guide unzip & remove control boxes from their inner pouch (both sides) and pull memory foam with electronics out one of the unzipped ends. See below: