Download DV500 AC Adapter

User’s
Manual
DV500
AC Adapter
This user’s manual covers the specifications of the AC adapter. The polarity of the
connector is shown in the figure below. For details on how to use the AC adapter, see
the DC100, DA100, DS400/DS600, or MV100/MV200 user’s manual. An AC power cord
comes with the DV500 AC Adapter. The type of AC power cord varies depending on the
suffix code.
Suffix Code
D
F
R
Q
H
Cord Type
UL/CSA cable
VDE cable
SAA cable
BS cable
GB (CCC) cable
Maximum Rated Power Voltage [V]
125
250
250
250
250
DV500
AC power cord
D: UL/CSA cable
Connector
–
+
DC output side
AC input side
(Connect to the
AC power cord )
F: VDE cable
Q: BS cable
R: SAA cable
H: GB cable
Yokogawa Electric Corporation
2nd Edition: January 2009 (YK)
All Rights Reserved, Copyright © 2005 Yokogawa Electric Corporation
IM DV500-01E
2nd Edition
1/2
AC Adapter Specifications
Rated supply voltage:
AC power supply, 100 to 240 VAC
Supply voltage range used:
AC power supply, 90 to 250 VAC
Rated supply frequency:
50 to 60 Hz
Rated output voltage:
19.5 VDC
Operating temperature range:
0 to 35°C
Operating humidity:
25 to 85%RH (no condensation)
Storage temperature:
–20 to 60°C
Storage humidity:
10 to 90%RH (no condensation)
Insulation resistance:50 MΩ between AC power input and DC output (500
VDC)
Withstand voltage:3 kVAC (50/60 Hz) between AC power input and DC
output for 1 minute
External dimensions*:
Approx 143 × 63 × 30.5 mm
Weight*:
410 g or less
* AC adapter unit only
WARNING
• Use only power cords supplied by YOKOGAWA for the instrument.
• Ensure that the supply voltage matches the rated supply voltage of the AC
adapter before connecting the power cable.
• Connect the power cord after checking that the power switch of the relevant
instrument is turned OFF.
• If you are not going to use the instrument for an extended time, unplug the
power cord of the AC adapter from the outlet.
• Be sure nothing is placed on top of the AC adapter or power cord or let heat
generating objects come in contact with them.
• When unplugging the power cord from the outlet, never pull the cord itself.
Always hold and pull by the plug. If the power cord is damaged, contact your
dealer for replacement.
IM DV500-01E