Download Power Panel Real World Cerrtifier

Power Panel
This Power panel has all of the features of the standard unit plus the ability to connect between 2 devices (“inline”). Inline connections allow passing PoE power to the
device and displays power draw (in watts).
- Network devices: Indicates advertised speed, duplex, & pairs, Phone: Indicates voltage amplitude & pairs used,
PoE: Indicates voltage amplitude (discovery & full), pairs used (end or mid span) & watts (when connected inline)
- Force link button: Sends link pulses to prompt communication from network devices. Test PoE button: Simulates
a VoIP phone or camera and prompts PoE power
- Detect DSL tone (DSL model only): Indicates presence of DSL digital tone
- Connect “Inline” (Inline model only): Connect between 2 devices and pass through PoE power to the device
allowing you to monitor an active system Measure power draw of the PoE device (in watts)
- Locate wire using tone (Tone Star model only) Detect tone placed on the wires by the Power Panel main unit.
Power Panel DVM Models to choose from:
- Standard unit (POE1000): Packed with features for sesing what is on a Cat5/6 cable (switches, phones, PoE
power) plus interacts with these devices.
- DSL Unit (POE1000DSL) All of the features of teh standard unti plus the ability to sense DSL tones.
- Inline unit (POE1000IL) The most popular Power Panel Cat5/6 DVM model has all the features of the standard
unit plus the ability to connect between 2 devices (“inline”). Inline allow passing PoE power to the device...
monitoring the device while it is ON. Plus the inline Power Panel measures & displays power draw (in watts).
- Tone Star Unit POE1000ILT: All the features of the inline unit plus we add our full features, filter probe. The probe
is used as a wire locator to audibly trace the tone placed on teh wires by the power panel main unit. It features
a tone button, volume control, ultrabright LED lighted tip, and 2 status LEDs: One to visually identify the tone and
the other to warn you that there is 60hz present in teh area. The probe is filtered to minize fluorescent hum
Product Includes:
- Power Panel CAT5/6 DVM
- 9V Battery
POE1000
POE1000DSL
POE1000IL
POE1000ILT
Real World Cerrtifier
- Illustrated Users Manual
- Warranty: 1 Year parts and labor
- Made in the U.S.A
Power Panel DVM Standard Model (Single Jack)
Power Panel DVM Standard Model with DSL Sensing (Single Jack)
Power Panel DVM inline, Power Sensing (Double Jack)
Power Panel DVM Tone Start, POE1000ILwith lighted probe
$115.00
$170.00
$130.00
$165.00
Performance, Certify, and Troubleshoot LAN Hardware and Cabling (10MB, 100MB, Gigabit)
The RWC100 takes you far beyond typical LAN and Cable testing. Now you can perform all of your standard
cable tests plus “Type” your cable (CAT 3, 5, 5E, 6) and perform real speed tests on cables, switches, hubs,
and PCs. With results displayed on easy-to-read graphs! Plus, store the test for later printing.
- Speed Tests (10MB, 1000MB, Gigabit):
- Real world Cert Level 1 (Projected)
- Real World Cert Level 2 (Confirmed)
- Cable typing (CAT 3, 5, 5E, 6)
- Displays Port speed, duplex, data level of all pairs
- Inline Port Mode (negotiated results)
- Port beacon (locate port)
- Cable Length (real 1 nanosecond TDR)
- Opens, shorts, split pairs, splits distance
- Next, Next, (far), Skew, Propagation delay
- Attenuation, Hot Splits
- Multi-pair Toner/Probe
- Stores 250 tests for later printing
Benefits:
- Certify & troubleshoot all LAN hardware & cabling.
- Compatible with all 10MB, 100MB, & Gigabit Networks!
- Test existing cables for higher speed compatibility
- Spot faulty wiring closet jumpers from your wall outlet
- Detect worn connectors and faulty terminations.
- Identify excessively noisy cables
- Decode 10/100/GIG PCs, switches & hubs
- Go between 2 LAN devices & identify the speed
- Test 10/100/Gigabit PCs, switches & hubs for signal
- Perform your own inspection on new devices and cables
- Identify network bottlenecks caused by slow links
- Print “Receipt” to document test results
Product Includes:
- RWC1000 Main Unit
- RWC1000 Remote Unit
- Cat5e Patch Cables (2)
- Protective Case (Zippered)
- Documentation Tablet
- “Passed” Stickers (64)
- 9V Battery (2)
- Instructional DVD
- Illustrated Users Manual
- Warranty: 1 year parts and labor
- Made in the U.S.A
RWC1000K
Major Credit Cards Accepted
Real World Certifier
1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com
$430.00
51
LanXPLORER PRO
LanXPLORER PRO is an outstanding In-Line Active and Passive network tester from
IDEAL INDUSTRIES, INC. It offers unsurpassed test capability for Local Area Network
management with state-of-the-art touchscreen interface and large clear color display.
LanXPLORER PRO is a high quality, powerful, convenient and easy to use tester unrivalled by any other
product available today.
With full In-Line and Endpoint test capabilities, LanXPLORER PRO tests not only copper cables but also
active LAN connections over copper and fiber links. In addition, it liberates the user from cables by allowing
most tests to be conducted through a wireless connection offering unparalleled flexibility. With such
comprehensive test capability and ease of use, LanXPLORER PRO is the perfect tool to meet the needs of
IT installers & systems administrators in any enterprise, campus or industrial Ethernet environment.
-
Lanxplorer Pro Key Features
Troubleshoot passive cabling and active networks
Touch-n-test user interface
Copper, fiber and Wi-Fi testing
Peak, instant, 30-second, & continuous bandwidth monitoring
PoE and PoE+ endpoint and in-line testing with load simulation
Device discovery and top-talker identification
A quick glance at the Lanxplorer Pro
- Network Tests over Copper & Fiber
- Identification of active devices with Network Discovery function
- Comparison of active network devices against historical data with
Network Verify
- DHCP client, Ping and Traceroute tests with VLAN support
- Full bandwidth Layer 1,2,and 3 Loopback device
- Diagnostic statistics including Top Ten talkers, protocols, error
generators and packet size distribution
-
Copper Features
Best-in-class Wiremapper - tests cables by pin as well as by pair with
split pair detection and length measurement
Wire tracing function in combination with an Amplifier Probe
Detection of PoE and PoE+, with voltage, current and power
measurements in endpoint and In-Line modes
Hub blink test with color-switching on supported devices
10/100/1000 BASE-T support
Network monitoring with In-Line tests and PC diagnostics function
-
Optical Fiber Features
Singlemode and Multimode SFP options
1000 BASE-SX, LX and ZX support
Link LED blink for visual tracing
Monitoring of VoIP calls and quality, including RTP Jitter
-
Wi-Fi Features
Identification of active network devices with Network Discovery function
Comparison of active network devices against historical data with Network Verify
DHCP client, Ping and Traceroute tests with VLAN support
802.11 b,g and n support
Identification of access points, Service Set Identifiers (SSID), channels in use,
signal strength and security settings
- Detection of channel conflicts
-
-
Lanxplorer Pro Functions
Advanced Wiremap and Wire Trace
PoE / PoE+ testing
Network Discovery
Network Verify
DHCP, Ping, Traceroute, VLAN
Endpoint LAN Testing over Copper
LAN Testing over Wi-Fi
In-Line LAN Testing over Copper with VolP Monitor, PC Diagnostics & PoE / PoE+
Loopback Mode
LAN Testing over Optical Fiber
Touchscreen
USB Interface & Internal Memory Internal memory for up to 100 tests in XML
format. Job manager for efficient organization of results. Data exportable to PC
via USB flash drive.
The LanXPLORER™ redefines ‘Simplicity of Use’. Through its state of the art QVGA 3 ½” Colour Touchscreen display, the LanXPLORER™ replaces the complex
menu navigation of existing products with a revolutionary Touch ‘n’ Test system. Testing with LanXPLORER is simple and fast. Results are easy to interpret
through its high resolution graphic display.
Touch ‘n’ Test
Virtual Keyboard
High Definition
Touchscreen menu navigation allows
tests to be completed within three
steps
Virtual Keyboard allows easier and
much faster data input
Crystal clear graphical interpretation
of results like Wiremap through large
3 ½” QVGA color display
33-942P
LanXPLORER PRO - Premium Package:
$3195.00
Package Includes Touch Screen, Dual RJ-45 ports, Wi-Fi, single SFP:
Includes soft carrying case, 2 RJ-45 STP patch cords, 1 smart remote,
printed quick reference guide, manual on CD, rechargeable battery
pack, AC power supply, inductive cable tracing probe
52
Datacomtools.com
TM
Options and Accessories
33-940-BP
LanXPLORER, NiMH Battery Pack
33-940-R1
LanXPLORER Active Remote #1
33-940-R12
LanXPLORER Active Remote #2-12
33-940-RJ45
LanXPLORER RJ45 Tool & 10 Inserts
33-940-PS
LanXPLORER Power Supply, 2.5A
SFP-850-1
LanXPLORER 1000Base-SX Fiber Option
SFP-1310-1
LanXPLORER 1000Base-LX Fiber Option
SFP-1550-1
LanXPLORER 1000Base-ZX Fiber Option
$95.00
$40.00
$425.00
$145.00
$91.00
$155.00
$395.00
$755.00
Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply
VDV PRO
The VDV PRO Cable Tester is a cable testing and verification device that can test all
wiring requirements throughout today’s residential and commercial environments.
- Network link LED blink for visual cable tracing
- Voice testing capability detects RJ-11 (1, 2, or 3 pair)
- Voice test also shows Normal or Reverse for pins 1 through 6
- Length measurement is shown during initial test results for convenience and time savings
- Eight remotes have RJ-45, RJ-11 and Coax F-jacks for increased testing capabilities
- Tests for shield continuity, shorts, opens, miswires, reversals and split pairs with remote connected
- Full dot-matrix LCD display for user convenience to read display results
- One-ended testing for shorts, opens and split pairs (no remote needed)
- Test results displayed in wire map format with message line for shorts and split pairs
- Will display wire map for 10Base-T and Token Ring with remote connected
- UTP, STP, and Coax length measurement in feet or meters using cable capacitance method
- Coax mapping with up to eight color coded coax remotes.
- Tone generator mode sends four different tones on all conductors, selected pair or selected pin
- Auto-off in any mode and low power consumption for long battery life
- Identifies presence of voltage on cables
33-770
33-771
33-774
33-780
33-775
VDV MultiMedia Cable Tester
VDV PRO w/one remote and terminator
VDV PRO w/eight remotes and terminators
VDV PRO Eight Remote Kit (ID 1-8)
VDV Pro w/one remote and probe
Eight Coax Terminator Kit
$240.00
$330.00
$125.00
$275.00
$36.95
The VDV MultiMedia Cable Tester is an easy-to-use cable testing and verification device that can quickly test all wiring
requirements found throughout today’s residential and commercial environments.
The VDV MultiMedia Tester makes it a snap to quickly verify wiring integrity and assure proper terminations for diverse
types of networks.
Voice – tests 3-pair USOC and 6-position RJ11/12 jacks for voice cable testing
Data – tests both shielded and unshielded cable testing to T568A/B (RJ45)
Video – tests coax cable for opens and shorts with F-Connector interface
- Comprehensive testing for Voice, Data and Video applications.
- Designed for testing in residential and commercial environments.
- Supports RJ11/12, RJ45, and coax F-Connector cabling and interfaces.
- Easy-to-read LCD display with PASS/Miswire indicators, wiremap display and troubleshooting modes.
- Multi-tone support for cable tracing and fault isolation.
- Convenient internal storage for remote.
- Capacity to support additional remotes
33-856
IENet™ PRO
VDV Multimedia Cable Tester Kit
$105.95
The tester features a unique easy-to-use cable test for 2 pair and 4 pair Industrial Ethernet cabling. With shielded 2 pair,
M12 and RJ-45 ports, the IENet™ PRO is compatible with most Industrial Ethernet cabling. Test results are displayed in
the PROFINET® Industrial Ethernet required format.
- Simple selection between Voice, 2 & 4 pair Data, & Coax testing functions (Voice & Video/Security tests via adapters)
- Tests for opens, shorts, miswires, reversals, split pair (user selectable) and length
- Indicates correct wiremap to T568A/B standards for shielded and unshielded cabling
- Easy-to-read LCD display with “PASS” or “Miswire” indicator for each test
- Identifies presence of voltages on cables
- Tone generator supports four different tones making fault isolation easier
- Integrated remote unit to make storage and carrying easier
- Can support additional optional remotes making it efficient for one person testing
- Network LED blink for visual cable tracing
- Numerical indication for UTP “No Shield” and STP - “Shield” to comply with industrial ethernet PROFINET® requirements
33-772
33-773
33-775
33-776
Major Credit Cards Accepted
IENet™ PRO w/single remote
IENet™ Pro w/eight remotes
Eight Coax Terminator Kit
IENet™ Pro Eight Remote Kit (ID 1-8)
1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com
$325.00
$510.00
$36.95
$268.00
53
PC Cable-Check Pro
This new universal tester maps cables, detects good connections, opens, shorts or
crosses. It works with over 20 types of cables including: LAN & telephone, Serial,
coaxial, USB, VGA, Mini-USB, S-video, FireWire, PS/2 keyboard & parallel printer.
- Auto scan or manual scan modes
- Rubber feet to grip to desk to prevent slipping
- Power shuts off after 30 seconds of non-use
- Rugged case now with built-in handle for transport
- 9V battery included
- Tests cables with the following terminations:
- Modular plugs: RJ45, RJ11, RJ12 UTP/STP
1577
LAN ProNavigator Tester & Kit
PC Cable-Check Pro
$154.85
If you’re a technician on the go, you need the LAN ProNavigator™ from Paladin Tools! Two-piece tester
includes main unit and remote with test results at both ends.
- One-button, simple testing (PASS/FAIL or fault find)
- Traces wires with tone & remote lights
- Quick fault analysis on coax & data cables
- CAT-5, CAT-5e or CAT-6 (UTP/STP) cable testing
- Detects opens, shorts, crossed wires & split pairs
- Compact & lightweight, comfortable to hold
- Test status lights at both ends (Main unit & remote)
- Designed & manufactured in the USA
1543
901066
Data/Link ID and Cable Check
- Coaxial: BNCs & CATV “F”
(BNC-to-F adapter required; not included)
- D-sub: 9-, 15- & 25-pin
- HD-sub: 15-pin
- USB: A, B, & mini 5-pin
- 1394 FireWire: 4- & 6-pin
- Centronics: 36-pin printer
1543 includes: Test set (main & remote),
2 RJ45 patch cords, 2 belt clips
901066 includes: Test set (main & remote),
2 RJ45 patch cords, 2 BNC coaxial cables, 2
CATV “F”to BNC adapters, 1BNC/BNC adapter, 1
dhielded RJ45 coupler, 2 belt clips in durable case
LAN ProNavigator Tester
LAN ProNavigator Test Set Kit
$89.00
$134.75
This tester maps UTP, STP, and flat satin cables with RJ45 terminations to identify good connections, opens,
shorts, and crosses and the unit also identifies network activity and transmission speeds.
- Cable mapping function tests data & phone connection schemes including patch cords & installed cables
- Identifies cross-over telephone connections
- Detects PC (NIC) & HUB data transmissions and PC (NIC) & HUB NLP or FLP link pulse
- Identifies data & link transmission speeds with real time detections: 100 MB or 10 MB
- Automatically scans with choice of slow or fast speeds
- Low battery detection on LAN ID tester
- One-year warranty
Kit Includes: (2) RJ45 patch cords, 9V battery included, A durable nylon carrying case with belt loop
1576
LAN Cable-Check
Data/Link ID and Cable Check
$58.00
Test continuity of RJ45 data and telephone connection schemes on patch cords or on installed cable runs to
identify: good connections, opens, shorts and cross-connections.
- Identifies cross-over telephone connections
- Automatically scans when cables are connected and unit turned on
- Two scan speeds: fast or slow
- Map connector and cable pin-out
- Tests cable up to 1,650 feet or 500 m
- Also tests R11 connections using an RJ11 adapter (Not Included)
- One-year warranty
Kit includes: (2) RJ45 patch cords, 9V battery included, A durable nylon carrying case with belt loop
1574
54
Datacomtools.com
TM
LAN Cable-Check
$28.35
Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply
Tone & Probe Plus Cable Check
The tester also provides full-range continuity testing, line condition, signal tracing & wire
identification with tone generator and tone probe cable tracer capabilities.
RJ45 LAN Tester identifies
- Good Connection, Opens, Shorts and Crosses
- Connector and Cable Pin-Out
- Clear LED Display for Each Pin and Shield
- Shielded RJ45 Modular Plug Socket
- Display of mapping w/dual speeds slow or fast
- Tests RJ11 and RJ45 Cables with Runs up to 600’
Telephone Test Set and Tone Probe Cable Tracer
- View telephone line status: Dial tone, ringing or busy
- Provides talk power for telephone lines and butt set use
- Selectable Dual/Single Tone Application for Circuits
- Four Tone Generator Patterns
- Test Continuity of Wires, Cables and Loads
- Tone Generator Features Auto-Off Function
- Located Patch and Termination Point of Wire
Kit Includes: Main & Remote Units, (2) 9v Batteries, (2) RJ45 Shielded Patch Cords, RJ11 & Alligator Clip
Cord, RJ11 Patch Cord, Durable, Nylon Carrying Case
1573
Tone & Probe Plus Cable Check
$77.75
- Fox 2 deluxe Tone Generator
- Hound 3 Probe Inductive Tracer
- Cordura Carrying Case
Fox 2 & Hound 3 Probe Kit
Note: The Fox and Hound series is not intended for use on powered wire or cables. All wire or cables must be
non-powered, non-grounded and non-connected
3399
ProTone Wire Locator
Fox 2 & Hound 3 Probe Kit
The Famous probe sold with 1000s of our Real World Certifiers is included in this
ProTone Kit
Tone Generator and Amplifier Probe Kit
- Loud tone with filtering technology locates wires quickly
- Ultra bright LED on tip to see dark cables
Product Includes:
- Volume control and tone LED for controlled operation
- Main Unit
- Insulated Tip and “60HZ present” warning LED for safety
- Remote Probe Unit
- RJ11, RJ45 and insulated Alligator clips for connection
- Batteries
- Powerful extra tests: voltage, polarity and continuity
- 2 RJ45 to RJ45 Jumpers
- Pouch and 9V batteries included
- Product Manual
- Protective
CTX590
ProTone Wire Locator
TRACETone™ Tone Generator & Amplifier Probe
TRACETone™ Tone Generator & Amplifier Probe
Major Credit Cards Accepted
$69.95
Tone Generator and Amplifier Probe Kit
Cable tracing kit with advanced new features
to give a complete signal tracing solution.
- Test continuity and located signal of
installed wire and cable.
- 2 selectable tone styles
- Tone Generator and Amplifier Probe fit
together for easy storage.
- RJ-11 Alligator clip & cable assembly included.
62-140
$103.55
$43.55
- Tone Generator #62-160.
- Amplifier Probe #62-164.
- Soft black nylon carrying case.
- Cable assemblies and flat tip.
33-864
Tone generator and amplifier probe kit
1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com
$98.75
55
Tone and Probe Kits
Greenlee is proud to introduce fully upgraded versions of its industry standard tone and probe tracing kits.
These kits offer superior tracing for low voltage applications such as telephone, data, and security alarm
wiring. Essential for the internal wiring technician, the tone and probe kits provide the ability to check
voltage on wire pairs as well as generate a tagging tone, which is then picked up by the tracing probe.
Featuring overall improved internal circuitry in both the amplifier and the tone generator, all of the new tone
and probe kits promise to provide an enhanced customer experience for tracing and identifying single
conductors or cables within bundles, either at midpoint or at remote ends.
The 601K-G Basic Tracing Kit features volume control and external warble-select. The 701K-G Professional
Tone & Probe Tracing Kit takes the functionality a step further, featuring an LED headlight, headset jack,
Short circuit beeper and external warble-select. Finally, the 701K-G/6A Professional Tone and Probe Tracing
Kit has all the features of the 701K-G but incorporates upgraded Telco-Grade angled-bed-of-nails clips for
those larger jobs. Best of all, each tone and probe kit in this new series is backed by a one year warranty.
601K-G
601K-G features: Tone Probe: 200B-G with adjustable volume control, and replaceable tip. Tone Generator:
77M-G with continuity & polarity LED, external warble select, short circuit LED/beeper: LED, Single/dual line
modular: LED, and alligator/ABN connector clips: Alligator
701K-G features: Tone Probe: 200EP-G with adjustable volume control, replaceable tip, LED signal indicator,
test telephone port, headset jack, and LED flashlight. Tone Generator: 77HP-G with continuity & polarity LED,
external warble select, RJ11 & RJ45 socket, lanyard, short circuit LED/beeper LED, single/dual line modular
LED: Dual, and alligator/ABN connector clips: Alligator
701K-G
701K-G/6A features: Tone Probe 200EP-G with adjustable volume control, replaceable tip, LED signal
indicator, test telephone port, headset jack, and LED flashlight. Tone Generator: 77HP-G/6A with continuity
& Polarity LED, external warble select, RJ11 & RJ45 socket, lanyard, short circuit LED/beeper LED, single/
dual line modular LED: Dual, and alligator/ABN connector clips: ABN
601K-G
701K-G
701K-G/6A
Basic Tone and Probe Kit
Professional Tone and Probe Tracing Kit
Tone & Probe Tracing Kit w/ABN Test Clips
$88.10
$109.85
$109.85
701K-G/6A
Pro 3000 Tone and Probe Kit
The Pro3000 Tone & Probe Kit is the innovative analog tone and probe from Fluke Networks. It’s your best
choice for toning and tracing bare wire on non-active networks. Easily identify individual pairs with its patented SmartTone™ technology (the five different tones for exact pair identification). Angled-bed-of-nails clips
allow easy access to individual wires, and the RJ11 connector is ideal for use on telephone jacks. The large
powerful speaker on the probe allows you to hear through drywall, wood or other enclosures to find wires
quickly and easily. You can send tone up to ten miles on most cables. Attach the nylon pouch to your belt,
and you will be equipped for any wire identification job.
26000-900
Pro 3000 Tone and Probe Kit
$82.00
IntelliTone™ Pro Toner & Probe
The IntelliTone™ Toner and Probe Series from Fluke Networks gives you a digital signal locating technology
that’s as advanced as the systems you work with. IntelliTone’s breakthrough solution and the only solution
that locates and isolates hidden or bundled voice, data and video cables quickly and reliably, even on active
networks. With dramatic gains in speed, precision and productivity that make analog tools obsolete.
Intellitone MT-8200 Include:
IntelliTone 200 Toner & Probe
IntelliTone 100 Tone & Probe
IntelliTone 200 Toner
IntelliTone 100 Toner
IntelliTone 200 Probe
IntelliTone 100 Probe
Coax F Connector Adapter
RJ11 patch cables
RJ45 patch cables
Test leads with alligator clips
Lanyards
Owners Cd and quick start guide
9V battery
Price
56
Datacomtools.com
60A
•
61A
63A
50A
•
•
TM
•
•
•
•
•
•
(2)
$125.00
53A
•
•
•
(2)
(2)
•
•
•
(2)
$199.00
51A
•
•
•
•
•
$125.00
•
•
•
•
•
•
(2)
$150.00
•
•
•
•
•
•
•
$95.00
•
•
•
•
$95.00
Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply
Tracker II
- Traces the path and determines the depth of wires and metallic pipes on active or
dead systems without having to deactivate the system.
- Lightweight receiver provides audible and visual indications of signal strength.
- Transmitter output and receiver sensitivity are fully adjustable for maximum accuracy.
- Transmitter offers three methods of connection: direct, inductive coupler, and inductive antenna.
- Includes transmitter assembly, receiver assembly, inductive coupler (clamp), built-in inductive antenna, two
8 ft. (2.4 m) test leads with heavy-duty alligator clips and durable polyethylene case.
- High frequency transmitter provides range up to 4,000 ft. (1,219 m) and depths up to 7 ft. (2 m).
- Receiver is 32 in. long (813 mm).
- Battery operated (eight AA and one 9V battery are included).
- 1 year limited warranty.
501
Wire Finder/Mini Locator
Tracker II
$690.00
For technicians who occasionally need to locate buried or in-wall wiring but don’t require all the bells and
whistles of a high priced cable locator. Compact design doesn’t take up valuable truck space while easy to
understand operations help avoid constantly referring to manuals. The 508S Wire Finder provides reliable
results on buried cables to depths of 3 feet and lengths up to 1000 feet. The unit can even be used to
determine the approximate depth of a wire or cable before you dig. Fully adjustable transmitter output and
receiver gain improve system performance and locating accuracy.
- Determines the approximate depth of a wire before digging begins
- Transmitter and receiver are fully-adjustable for accurate locating
- Reliable results on buried cables to depths of 3’ and lengths up to 1000’
- Quick-change test leads for use in any industry, even international power outlets
- Voltage protection allows use on live AC circuits
- Automatic shutoff prevents accidental battery discharge
508S
Pulser Fault Locator
Wire Finder/Mini Locator
$280.00
Pulser Fault Locator completes your buried cable trouble-shooting tool set, pinpointing the smallest breaks in
buried cable insulation. The transmitter pulses a high-voltage signal that radiates into the earth at fault locations. With the A-frame mounted receiver, a visual analog meter points the way to the source of the voltage &
identifies faults on a single wire, showing the need to replace instead of repair. Complete with a rechargeable
transmitter, receiver, A-frame, ground stake, 120VAC charger, 12 volt DC cigarette lighter adapter & operating
instructions. Extra long test leads feature heavy duty alligator clips for use on multiple cable types.
- Portable Transmitter “Pulses” a High Voltage Signal into the Earth at the Location of the Faults.
- With the A-frame Mounted Receiver, a Visual Analog Meter Points the Way to the Source of the Voltage.
- Multiple Faults on a Single Wire can be Identified Indicating the Need to Replace Instead of Repairing.
- Extra Long Test Leads Feature Heavy-Duty Alligator Clips for Use on Multiple Cable Types.
- Includes a Rechargeable Transmitter, Receiver, A-Frame, Ground Stake, 120V AC Charger, 12 Volt DC
(Cigarette Lighter) Adapter, and Complete Operating Instructions.
- Battery-Operated (1) 12V and (1) 9V Included.
- 1-Year Warranty
PE2003
Modular Adapters
Pulser Fault Locator
$1110.00
The Banjo Modular Adapters are designed to permit testing on working lines, and
allow circuit access without disrupting service.
- Sturdy copper contacts are angled to prevent alligator clips from falling off during testing.
- Small holes in each contact allow insertion of test probes.
- All circuits are clearly marked on sides and bottom of the Banjo adapters.
- Banjo Modular Adapters available with 4, 6,and 8 wire (RJ11, RJ45)
- Banjo Modular Adapters available with numbered contacts and no interruption of service design
- High impact plastic design; outside plant resistant Banjo Modular Adapter allows for replace-able line cords
- The Banjo adapter is available in four, six, or eight wire configuration for voice and data applications.
- Heavy duty, molded-in clip for attaching to shirt pocket or tool pouch.
10210-100
10220-100
10230-100
10210-101
10220-101
10230-101
Major Credit Cards Accepted
4-Wire Banjo Adapter (in-line)
6 Wire Banjo Adapter (in-line)
8 Wire Banjo Adapter (in-line)
4 Wire Banjo Adapter w/K-plug (in-line)
6 Wire Banjo Adapter w/K-plug (in-line)
8 Wire Banjo Adapter w/K-plug (in-line)
1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com
$22.00
$24.00
$28.00
$26.00
$28.00
$33.00
57
Butt Sets
TS52
TS44-PRO
TS®52 PRO Caller ID test set
features the latest in test set
technology.
TS42
TS30
TS®40 Series combine ruggedness, and waterproof
durability with powerful testing capabilities. TS44-PRO
includes Data lockout protection & Data lockout override.
The TS®30 – a rugged
butt-in telephone test set
at an affordable price.
TS52PRO Test Set with angled bed-of-nails cord piercing pin
TS52PRO Test Set with 346A Plug
TS52PRO Test Set with Piercing Pin Clips
TS52PRO Test Set w/angled bed-of-nails cord w/piercing pin & RJ11 plug
TS44 PRO Test Set with piercing pin only
TS44 PRO Test Set with angled bed-of-nails & piercing pin
TS44 PRO Test Set with angled bed-of-nails & RJ11 plug
TS42DLX Test Set with angled bed-of-nails
TS42DLX Test Set with piercing pin clips
52801009
52801004
52801001
52801RJ9
50801001
50801009
50801RJ9
42801-009
42801-001
$404.00
$404.00
$404.00
$414.00
$384.00
$384.00
$384.00
$309.00
$285.00
TS25
TS®25D Test Sets - features data lockout, lockout
override and a large LCD.
30800-009
25501-109
22801-009
22801-001
22800-009
19800-009
19800-003
TS22
TS®22 Series Test Sets
- combining reliability,
durability and expanded
utility.
TS19
The TS®19 features
DataSafe®, Tone or
Pulse operation, and
Talk capabilities.
TS30 Test Set with angled bed-of-nails clips
TS25D Test Set with angled bed-of-nails kit
TS22A Test Set with angled bed-of-nails clips
TS22A Test Set with piercing pin clips
TS22 Test Set with angled bed-of-nails clips
TS19 Test Set with angled bed-of-nails clips
TS19 Test Set with banana jacks clips
$228.00
$237.00
$324.00
$324.00
$280.00
$110.00
$110.00
Butt Sets
LB110
LB220
LB255
LB300
1780
PE961
PE830
The Lil’ Buttie™ Telephone
Test Set is designed for
use by datacom, telecom,
cable installers and
technicians.
Advanced features of the Lil’
Buttie PRO include scrolling
recall of stored numbers, full
display of caller ID and call
waiting data and faults, and
amplified speaker.
The Lil’ Buttie Ranger™
Telephone Test Set is an advanced, DSL-safe telephone
test set for use by datacom,
telecom, and cable installers
and repair technicians.
The Resi-Talker is JDSU’s
most economical test set
for basic telephone system
work. Identify POTS dial
tone with most economical
butt set.
Portable handset for installers, repair technicians and
other authorized personnel
to use for line testing and
temporary communications.
Features our DigAlert overvoltage alarm & lock-out to
eliminate damaging digital
service lines. Provides full
ADSL compatibility.
This Telephone Test Set
will help you deal with the
increasing complexity of
telecom installation and
maintenance
LB110
LB220
LB220-BT
LB230
LB255
LB255-BT
LB300
Lil’ Buttie with piercing clip set
Lil’ Buttie Pro with bed-of-nails clips
Lil’ Buttie Pro with bed-of-nails clips & protective boot
Lil’ Buttie Pro with bed-of-nails clips & AT&T clip
Ranger with ADLI, bed-of-nails cord set, & pouch
Ranger with ADLI, bed-of-nails cord set, & protective boot
Resi-Talker with alligator clips cord set
$115.00
$152.55
$159.98
$156.00
$229.80
$236.00
$85.05
Modular Adapter
This modular adapter allows
in-line testing for any plug/jack
combination. It includes two 4-pair
jacks plus a 152mm (6 in.) modular
cord terminated with our patented
4-pair “universal” plug for accessing
any standard 6- or 8-position jack.
Individual conductors are broken
out by pin number and correspond
to eight separate test pads. Test
equipment can be securely attached
to the test pads using alligator clips.
For quick reference in the field,
USOC, T568A, and T568B wiring charts are printed right onto the MODAPT body. When used with
Siemon’s TESTAR® adapter and S110® test adapter, the MODAPT can be used to test connections on
S66M and S110 blocks.
58
Paladin Tools Butt Set
Test set with two-way hands free & DigAlert™
Tele-Mate Pro telephone test set
$110.00
$320.00
$178.00
Tone & Probe Kits
MODAPT
MODAPT
1780
PE961
PE830
Siemon modular adapter
Datacomtools.com
TM
$20.85
601K
801K
For professionals who need wire
identification tools without the extra cost,
the 601K kit is the answer.
601K
801K
When it comes to wire identification kits,
the 801K premium tone and probe kit is
top of the line!
Basic Tone and Probe Kit
Premium Tone and Probe Kit
601K Kit Tone Generators and Probes Also Sold Separately
77M
Tone Generator
200B
Inductive Amplifier
801K Kit Tone Generators and Probes Also Sold Separately
77HP/6A
Tone Generator
200FP
Multi-Filter Tone Probe
$102.10
$169.00
$31.85
$68.60
$38.85
$115.00
Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply
Fluke 27 II & Fluke 28 II Rugged IP 67 Industrial Multimeters
Accuracy Specifications
DC voltage
Max resolution
Accuracy
AC voltage
Max resolution
Accuracy
DC current
Max resolution
Accuracy
AC current
Max resolution
Accuracy
Resistance
Max resolution
Count
Capacitance
Frequency
Temperature
Low pass filter (measurement on VSD’s)
Compliance
IP rating
Power
Battery life
27II
0.1 mV to 1000V
0.1 % + 1
0.1 mV to 1000V
0.5% + 3
0.1µA to 10A
0.2% + 4
0.1µ to 10A
1.5% + 2
6000
-
Yes/Yes
250µS (28 II)
Yes
Yes
Yes
CAT IV 600 V/CAT II 1000V
Rubber Holster
10 feet drop test
Yes, IP 67 rated
Limited lifetime
2.5in x 3.93in x 7.8in, 1.54lbs
0.1Ω to 10A
0.7% + 4
0.2% + 4
1.0% + 2
6000/19,999
1 nF to 9999µF
0.5Hz to 199.99 kHz
-200°C - 1090°C
Yes
CAT IV 600 V, CAT III 1000V
IP67
Three AA batteries
800 Hours
27 II Rugged IP 67 Average Responding Multimeter
28 II Rugged IP 67 True-rms Multimeter
27 II
28 II
28II
0.05 % + 1
The Fluke 88V Automotive Multimeter is designed to help
automotive professional beat the book. This DMM has
more measurement functions, troubleshooting features
and accuracy to solve virtually any problems on conventional and hybrid vehicles.
Features:
- 0.1 % dc accuracy
- Current measure up to 10 A, 20 A for up to 30 seconds
- Millisecond pulse width measurements for fuel injectors
- Optional magnetic hanger allows meter to attach to the
vehicle and free your hands for other tasks
- Min/Max/Average recording with Min/Max Alert to capture variations automatically
- Peak Min/Max to record transients as fast as 250 μs
- Relative mode to remove test lead resistance from low ohms measurements
- Auto and manual ranging for maximum flexibility
- Autohold™ to capture stable readings with only one touch of the leads
- Analog bargraph to track changing or unstable signals
- Input Alert provides audible warning against wrong use of input jacks
- 10 meg ohm input impedance won’t damage computer circuits
- Limited lifetime warranty
88V
88V Automotive Multimeter
114 Digital Multimeter
$441.95
$451.95
The new Fluke 114 is the Troubleshooting tool for “go/nogo” testing. it includes a feature to prevent false readings
caused by ghost voltage.
77-IV Digital Multimeter
- AutoVolt: Automatic ac/dc voltage selection
- LoZ: Helps prevent false readings due to ghost voltage
- Large White LED Backlight to work in poorly lite areas
- Compact ergonomic design for one-handed operation
- Resistance, continuity, frequency, and capacitance
- Min/Max/Average to record signal fluctuations.
The 77-IV Digital Multimeter has the features needed to repair most
electrical and electronic problems. This meter is simple to use and has
significant improvements over Fluke’s original 70 Series with more
measurement functions and conformance to the latest safety standard.
- Wide 1000V measurement range
- Average responding ac measurements
- 0.3% accuracy
- 10 Amps continuous
- Frequency and capacitance
- Resistance and continuity
Functions
V DC
V AC
A DC
A AC
Resistance
Capacitance
Frequency
Range best
600.0 mV to 1000V
6.000 V to 1000 V
60.00 mA to 10 A
60.00 mA to 10 A
600.0 Ω to 50 MΩ
1 nF to 9,999 µF
99.99 Hz to 99.99 kHz
Functions
Volts AC/DC
Resistance
Accuracy
± (0.3% + 1)
± (2.0% + 2)
± (1.5% +2)
± (2.5% + 2)
± (0.5% + 1)
± (1.2% + 2)
± (0.1% + 1)
Best resolution
0.1 mV
1.0 mV
0.01 mA
0.01 mA
0.1 Ω
1 nF
0.01 Hz
77-IV Digital Multimeter
77-IV
114
Includes:
- TL75 Test leads
- 9V battery (Installed)
- 80BK temperature probe
- AC72 Alligator clips
- Getting started manual
Diode test
Sleep mode - 30 minutes
IEC 61010 rating - CATIII-1000V
Battery access door that enables
changing batteries without
breaking the calibration seal.
- Holster
- CD with detailed manual
87-5 Industrial Multimeter
87-5
$399.95
Test Leads
TL223
TL220
TLK225
TL81A
AC285
TL221
TL76
TL71
AC220
AC283
TP220
$59.10
$59.10
$122.95
$122.95
$22.25
$22.85
$25.35
$21.65
$30.25
$30.25
$18.05
Includes: Holster, Installed 9 V battery, TL75 Test leads User manual
115
115 Digital Multimeter
Temperature Probe
C1600 Gear Box
C50 Soft Meter Case
C25 Large Soft Case for DMMs
TPAK ToolPak, Meter Hanging Kit
CXT80 Extreme Case
C100 Universal Carrying Case
C101 Hard Case
C125 Soft Meter Case
C550 Tool Bag
C35 Soft Carrying Case
$140.95
Specifications
- Maximum voltage between any terminal and earth ground 600 V
- Surge protection 6 kV peak per IEC 61010-1 600 VCAT III, Pollution Degree 2
- Display Digital: 6,000 counts, updates 4 per second
- Bar graph 33 segments, updates 32 per second
- Operating Temperature -10 °C to + 50 °C
- Storage Temperature -40 °C to + 60 °C
Cases
SureGrip Electrical Test Lead Set
SureGrip Industrial Test Lead Set
SureGrip Master Accessory Set
Deluxe Electronic Test Lead Set
SureGrip Alligator Clips
SureGrip Test Lead Extension Set
2mm/4mm Test Lead Set
Test Lead Set
SureGrip Alligator Clips
SureGrip Pincer Clips
SureGrip Industrial Test Probes
114 Digital Multimeter
- AutoVolt: automatic ac/dc voltage selection
- Large white LED backlight to work in poorly lit areas
- Resistance and continuity
- Min/Max/Average to record signal fluctuations
- CAT III 600 V safety rated
- Safety conformance
The Fluke 87-5 has measurement functions, troubleshooting features,
resolution and accuracy to solve more problems on motor drives, in-plant
automation, power distribution and electo-mechanical equipment.
-
Best Accuracy
0.5% + 2
0.9% + 2
Compact true-rms meter for field service technicians. The
Fluke 115 is the solution for a wide variety of electrical
and electronic testing applications.
$269.95
True-RMs
Touch hold
Fused current inputs
Continuity
MIN/MAX mode
Peak MIN/MAX - 250 µSec
Relative mode
Range and Resolution
600 V
40MΩ
115 Digital Multimeter
87-5 Industrial Multimeter
-
$441.95
$48.00
$29.85
$32.00
$30.65
$163.95
$42.90
$47.65
$30.00
$77.50
$17.15
80PK-26
80PK-8
80TK
80AK
80AK-A
80PK-3A
80PK-9
80PK-EXT
$167.95
Compatibility Key
General Specifications:
Bar graph/backlight
Peak transient capture
Min/Max/Avg
Reading hold
Relative readings (zero)
Safety rating
External protection
Drop test
Dustproof/waterproof
Warranty
Size & weight (HxWxL) w/holster
88V Automotive Multimeter
110 Series
170 Series
27II, 28II
77IV
87-5
233
289
Tapered Temperature Probe
Pipe Clamp Temperature Probe (K)
Thermocouple Module (K)
Thermocouple Adapter
Thermocouple Adapter
Surface Probe (K)
General Purpose Probe (K)
Extension Wire Kit (K)
$84.29
$136.99
$116.95
$22.95
$23.75
$129.95
$43.95
$47.15
Fluke Multimeter Accessories
Major Credit Cards Accepted
1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com
59
233 Remote Display Multimeter
The Fluke 116 was specifically designed for the HVAC professional. It has everything
needed in an HVAC meter including temperature and microamp measurements to
quickly troubleshoot problems with HVAC equipment and flame sensors.
- Removable display gives flexibility.
- Place the display where you can see it and then put the
meter where it is convenient - no more juggling of leads.
- True-rms ac voltage and current for accurate
measurements on non-linear signals
- Measure up to 1000 V ac and dc
- Measure up to 10 A (20 A for 30 seconds)
- Built in thermometer conveniently allows you to take
temperature readings
- Built in thermometer for HVAC applications
- Microamps to test flame sensors
- Min/Max/Average to record signal fluctuations
- Large white LED backlight to work in poorly lighted areas
- Compact ergonomic design for one-handed operation
- Compatible with optional magnetic hanger
Features:
- Temperature measurements
- Large Backlit digital display
- 3-1/2 Digits
- AutoVolt/LoZ
- Min/Max recording
- 6000 counts
Functions
Volts
Current
Temperature
Resistance
Capacitance
Frequency
Diode
116
- Analog bargraph
- Display hold
- CAT III 600 V safety rated
Range and Resolution
600V
600.0µA
+400°C
40MΩ
1 nF to 9,999µF
5 Hz to 50 kHz
2V
Best Accuracy
0.5% + 2
1.0% + 2
1.0% + 2
0.9% + 2
1.9% + 2
0.1% + 2
0.9% + 2
116 Digital Multimeter
$194.95
117 Digital Multimeter
Compact True-RMS meter for commercial applications. Fluke 117 is the ideal meter
for demanding settings like commercial buildings, hospitals, and schools.
- VoltAlert™ technology for non-contact voltage detection
- AutoVolt automatic ac/dc voltage selection
- Low input impedance: helps prevent false readings due to ghost voltage
- True-rms for accurate measurements on non-linear loads
- Measures 20 A (30 seconds momentary; 10 A continuous)
- Compact ergonomic design for one-handed operation
- Compatible with optional magnetic hanger (ToolPak) for hands free operation
- CAT III 600V safety rated
Specifications:
- Max. voltage between any terminal & earth ground 600V - Surge protection 6 kV peak per IEC 61010-1 600 V CAT III
- Fuse for A input 11 A, 1000 V FAST Fuse
- Display Digital: 6,000 counts, updates 4 per second
- Bar graph 33 segments, updates 32 per second
- Battery type 9 volt Alkaline, NEDA 1604A/ IEC 6LR61
117
117 Digital Multimeter
Introducing the 179, 177 and 175 Digital Multimeters - the new generation of
DMMs. Want a smarter meter or a tougher one? Buy one of these and you get
both. With features like lifetime warranty. 6000 count resolution. 0.09% accuracy
177,179. Min/Max/Average. True-rms, ac voltage and current. They’re all CAT IV
rated and sport an easy access door. The 177 and 179 have a backlight. The 179
measures temperature. All told, this is one powerhouse line of digital multimeters.
They’re all super-simple to use and built tougher than a world champion wrestler.
- Backlight to illuminate the screen (177 & 179 only)
- Min/Max/Average recording
- Drop protected to 1 meter
Includes:
- 80BK Temperature Probe (179 only)
- Test leads
175
177
179
233
- Installed 9V battery
- Users manual
175 Multimeter
177 Multimeter
179 Multimeter
$259.95
$269.95
$280.95
Current Clamps
I2000FLEX
I410
I1010
I200
I3000S
I400
$321.95
$208.95
$339.95
$132.95
$540.95
$132.95
FOM Fiber Optic Meter
$311.95
The new 289 are the next generation high performance
logging Multimeter designed to solve complex problems
in electronics, plant automation, power distribution, and
electromechanical equipment.
- TrendCapture Graphing Capability to Review Logged Data
- Larger ¼ WGA dot Matrix Display
- More Memory - Extended on-board Logging Capability
- More Information. Multiple Readings per Display
- Low Pass Filter for Motor Drive Measurements
- LoZ Function - Helps Eliminate False Readings due to Ghost Voltage
- New 50 Ω Range with 1mΩ Resolution for Accurate Motor Winding Measurements
- New “i” button - On-board Function help
- PC Interface for Closed-case Calibration and Easy Data Transfer
Features:
- Multiple on screen displays
- True-rms ac bandwidth
- dBV/dBm
- DC mV resolution
- Megohm range
- Conductance
- Continuity beeper
- Elapse time clock/time of day clock
- Min-Max-Avg/duty cycle/pulse width
- Isolated optical DMM interface with USB PC connection
- Auto/touch hold
- Over 200 hours logging capacity with new sleep function
- Warranty Limited
289
Yes
100 kHz
Yes
1µV
Up to 500 MΩ
50.00 nS
Yes
Yes
Yes
Yes
Yes
Yes
Lifetime
289 Industrial Logging Multimeter w/ TrendCapture
Probe Lights
L210
FOM
AC Current Clamp (up to 2000A)
AC/DC Current Clamp (up to 400A)
AC/DC Current Clamp (up to 1000A)
AC Current Clamp
AC Current Clamp (up to 3000A)
AC Current Clamp
Yes
Auto/Manual
Yes
Yes
AA Alkaline
Yes
Rubber Overmold
Three Years
2.08” x 2.08” x 7.6”
1.3 lbs
289 Industrial Logging Multimeter w/TrendCapture
Fiber Optic Meter
I410
0.1mV to 1000V
0.25% + 2
0.1mV to 1000V
1.0% + 3
0.1mA to 10A
1.0% + 3
0.1mA to 10A
1.5% + 3
0.1Ω to 40MΩ
6000
1000 nF to 9999µF
0.1 Hz to 50.00 kHz
-40°C to 400°C
AA Batteries: (3) Body, (2) Display
400 Hours
2.4 GHz ISM Band, 10 meter range
CAT IV 600V, CAT III 1000V
233 Remote Display Multimeter
$205.95
170 Series Multimeters
Features:
- Lifetime Warranty
- Display shows improved resolution
Accuracy Specifications
DC voltage
Range
Accuracy
AC voltage
Range
Accuracy
DC current
Range
Accuracy
AC current
Range
Accuracy
Resistance
Range
Counts
Capacitance
Frequency
Temperature
Power
Battery Life
Wireless frequency
Safety Rating
General Specifications
AC True-RMS
Ranging
Backlight
Min/Max/ Avg
Battery type
Removable Display
External Protections
Warranty
Size (H x W x L)
Weight
$460.95
L210
L206
LVD1
L215
Compatibility Key
116 Digital Multimeter
$576.95
110 Series
170 Series
27II, 28II
77IV
87-5
233
289
Probe Light Kit
Deluxe LED Hat Light
Volt Light
SureGrip Kit w/ Light & Probe Extender
$28.95
$34.90
$26.50
$72.55
For more information on Fluke Multimeter Accessories go to www.datacomtools.com
Fluke Multimeter Accessories
60
Datacomtools.com
TM
Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply
289/FVF Data Login Multimeter and Software Combo Pack
Digital Logging Meters
Includes:
- Fluke-289 True-rms industrial logging multimeter.
- FVF-SC2 FlukeView forms software and cable.
- TL71 Silicon test lead set.
- AC72 Alligator clips.
- 80BK-A Integrated DMM temperature probe.
- TPAK Magnetic meter hanger for hands-free operation.
- C280 Soft case for meter protection and accessory storage.
289/FVF
Data Login Multimeter and Software Combo Pack
$649.95
179/EDA2 Electronics Multimeter and Deluxe Accessory Combo Kit
Includes:
- 179 True-rms digital multimeter.
- C35 lightweight soft case.
- TL910 Electronic test probes.
- TL224 SureGrip silicon test leads.
- AC280 SureGrip hook clips.
- 80BK-A Type-K temperature probe.
- ToolPak meter handing accessory to hold meter on steel surfaces.
179/EDA2
Electronics Multimeter and Deluxe Accessory Combo Kit
DML-430A Digital Logging Meter (43,000 Data Points)
$316.95
117/322 Electrician’s Combo Kit
Includes:
- 117 True-rms digital multimeter.
- C115 Deluxe carrying case.
- 322 Compact clamp meter.
- TL75 Test lead set.
- ToolPak Meter hanging strap.
- Three-year warranty on 117 DMM.
- Two-year warranty on 322 Clamp.
- One-year warranty on accessories.
117/322
Electrician’s Combo Kit
$294.95
116/322 HVAC Combo Kit
HVAC Combo Kit
Includes:
- Fluke 88V automotive multimeter. - Insulation piercing probe.
- TL224 Heat resistant test leads.
- Packaged in a carrying case.
- TP220 Removable test probes.
- AC285 Alligator clips.
- TPAK Magnetic hanger.
- 80BK-A Temperature probe.
- RPM80 Inductive pick-up.
- Automotive backprobe pins.
Automobile Combo Kit
$607.95
87V/E2 Industrial Electrician’s Combo Kit
Industrial Electrician’s Combo Kit
Major Credit Cards Accepted
$289.00
Digital Multimeters
DM-810-A includes:
- Auto and manual ranging
- Beep-Jack™ audible and visible warning to guard against
improper A and mA terminal plug in.
- High visibility 10000 count LCD dual digital display.
- Capacitance measurement capability.
- Intelligent auto-power off, display backlight, analog bar graph.
- True RMS
- PC interface capability using optional USB RS-232 cable with
data recording PC software.
- Lifetime Limited Warranty.
DM-820-A also includes:
- Non-contact and single probe voltage detection.
Includes:
- 87V Industrial multimeter.
- C35 lightweight soft case.
- TL224 1.5m silicone leads.
- TP38 removable probes.
- AC220 retractable alligator clips.
- ToolPak meter hanging accessory.
- 80BK-A K-type temperature probe.
87V/E2
- Performs resistance, conductance, frequency, duty cycle, temperature and
capacitance measurements, plus diode and continuity tests.
- Dual temperature measurement up to 1832°F/1000°C using type K thermocouples.
- Bright, backlit display is easy to read under any light condition.
- Intelligent Power Off conserves battery life but will not turn off during measurements.
- Wide AC bandwidth – to 100 kHz for voltage and 20 kHz for current.
- Accessories included: (1) 9V battery, bead temperature probe (400°F/ 204°C max.),
test leads, protective boot, carrying case.
- Lifetime Limited Warranty.
DM-860A Industrial 500,000-Count Digital Multimeter
$294.95
88V/A Automobile Combo Kit
88V/A
- AC+DC True RMS, 50,000-count dual display for greater
accuracy. 500,000 count available in DC voltage mode.
- VFD (variable frequency drive) voltage and frequency functions
for accurate readings on noisy drive waveforms.
- Beep-Jack™ audible and visual input alert helps avoid blown
fuses or damage to meter.
- 41-segment analog bar graph makes it easy to view changes.
- Record max, min, avg, and max-min and data hold.
- Crest capture (peak hold) max and min readings.
- Relative offset display mode makes monitoring relative
measurement changes simple.
Specifications
Voltage measurement 500.00mV; 5.0000, 50.000, 500.00, 1000.0V
Amperage measurement 500.00, 5000.0μA; 50.000, 500.00mA; 5.0000, 10.000A
Resistance
500.00Ω; 5.0000, 50.000, 500.00kΩ; 5.0000, 50.000MΩ
Capacitance
50.00; 500.0nF; 5.000, 50.00, 500.0μF; 5.000, 25.00 mF
Frequency
5Hz-200kHz sine wave; 5Hz-2MHz logic level square wave
Temperature
K type, -58°F to 1832°F (-50°C to 1000°C)
Measurement category Category CAT IV, 1000V
Includes:
- Fluke 116 HVAC multimeter.
- Fluke 322 clamp meter.
- TL75 Hard point test lead set.
- Tool pak meter hanger.
- C115 Deluxe carrying case.
- 80PK-11 Velcro pipe clamp.
- 80AK-A Thermocouple adapter.
- 80PK-1 Thermocouple bead probe.
116/322
$255.00
Industrial 500,000-Count Digital Multimeter
Includes:
- 179 True-rms digital multimeter.
- 1AC-II VoltAlert voltage detector.
- C35 lightweight soft case.
- AC220 retractable alligator clips.
- TP220 12mm stainless steel tip.
- TL224 1.5m silicone leads.
- ToolPak meter hanging accessory.
- 80BK-A K-type temperature probe.
Electrician’s Multimeter and Voltage Tester Combo Kit
- Voltage Measurement: 60mV to 1000V AC/DC
- Amperage Measurement: 600mA to 10A AC/DC
- Resistance: 600Ω to 60MΩ
- Frequency (Hz): 40 ~ 500
- Measurement Category: Cat IV 1000V
$316.95
179/AC-II Electrician’s Multimeter and Voltage Tester Combo Kit
179/AC-II
- Auto and manual ranging
- Beep-Jack™ audible and visible warning to guard against
improper A and mA terminal plug in.
- Capacitance & dual-input temperature measurement capability.
- Autocheck feature provides selection of AC volts, DC volts or
resistance with low impedance for ghost voltage elimination.
- High visibility 10000 count LCD dual digital display.
- True RMS (AC + DC)
- Data Logging Capability: 87,000 points stored single channel,
43,000 points stored dual channel.
- Intelligent auto-power off, display backlight, analog bar graph.
- Lifetime Limited Warranty.
- Voltage Measurement: 60mV to 1000V AC/DC
- Amperage Measurement: 600mA to 10A AC/DC
- Resistance: 600Ω to 60MΩ
- Frequency (Hz): 40 ~ 500
- Measurement Category: Cat IV 1000V
$451.95
DM-820A Digital Multimeter
DM-810A Digital Multimeter
1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com
$190.00
$175.00
61
Professional Plant Digital Multimeters
Mini Digital Multimeter + Voltage Detector
DM-510 Features:
- Auto and manual ranging
- Non-contact and single-probe voltage detection
- Beep-Jack™ audible and visible warning to guard against improper A and mA
terminal plug in.
- High visibility 6000 count LCD display.
- Capacitance and temperature measurement capability.
- Low impedance mode.
- True RMS
- Peak (crest) hold; min, max
- Auto power off, display backlight, analog bar graph
- PC interface capability using optional USB RS-232 with data recording PC software.
- AutoCHECK provides selection of AC volts, DC volts, or resistance with low impedance for ghost-voltage elimination.
- Lifetime Limited Warranty.
- Voltage Measurement: 60mV to 1000V AC/DC
- Amperage Measurement: 600mA to 8A AC/DC
- Resistance: 600Ω to 60MΩ
- Frequency (Hz): 50 ~ 400
- Measurement Category: Cat IV 300V; Cat III 600V, Cat II 1000V
DM-510A
Professional Plant Digital Multimeter
$130.00
- AC/DC Voltage & current, resistance, diode/continuity.
- Built-in non-contact AC voltage detector (NCV) with red
LED indicator and audible beeper.
- Large-digit 2,000 count LCD display.
- 10A max Current.
EX310
- Manual ranging w/ 9 functions and 0.5% basic accuracy.
- Battery test function for 1.5V and 9V batteries.
- Low battery indicator.
- Complete with test leads, tilt stand, protective holster
and 9V battery.
EX320
- Autoranging DMM with 8 functions and 0.5% basic accuracy.
- Large-digit 2,000 count LCD display.
- 10A max Current.
- Max Hold, Data Hold, Relative and Auto power off.
- Complete with test leads, tilt stand, protective holster and 2 AAA batteries.
EX310
EX320
Mini Digital Multimeter + Voltage Detector
Mini Digital Multimeter + Voltage Detector
$39.99
$49.99
Heavy Duty True RMS Industrial MultiMeter
Digital Multimeters
- 1000V input protection on all functions.
- Dual sensitivity frequency functions.
- Large backlit LCD.
- Diode open circuit voltage of 2.8V DC.
- Auto power off with disable feature.
- Complete with double molded test leads, magnetic
hanging strap, Type K bead wire temperature probe
(EX505, EX520 & EX530), carrying case, & 9V battery.
DM-200 Features:
- Auto and manual ranging
- Non-contact and single-probe voltage detection
- Beep-Jack™ audible and visible warning to guard against improper A and mA
terminal plug in.
- High visibility 6000 count LCD display.
- Auto power off, display backlight, analog bar graph
- PC interface capability using optional USB RS-232 cable with data recording PC
software.
- Lifetime Limited Warranty.
- Voltage Measurement: 60mV to 1000V AC/DC
- Amperage Measurement: 600mA to 8A AC/DC
- Resistance: 600Ω to 60MΩ
- Frequency (Hz): 50 ~ 400
- Measurement Category: Cat IV, 300V; Cat III 600V, Cat II 1000V
DM-210A
DM-200A
DMM, 1KV AC/DC, CAP, TEMP (DM-210A)
DMM, 1000V AC/DC (DM-200A)
$107.60
$72.65
TRMS Digital Multimeter
- True RMS for no-compromise accuracy when harmonics are present.
- Large LCD for easy viewing.
- AC/DC voltage detection for identifying live lines without contacting conductors.
- Easy viewing, backlit display.
- Auto shut-off for longer battery life.
- Low battery indicator.
- Audible continuity and diode tests.
- Frequency, capacitance, & resistance measurements.
- Data hold to capture measurement.
- 6000-count LCS for high resolution.
- Min/Max feature for added versatility.
- Audible input alert warns user if leads are in incorrect position.
- Lifetime limited warranty.
Specifications
Amperage measurement
Voltage measurement
Resistance measurement
Frequency measurement
Capacitance
Display
Measurement category
DM-350
TRMS Digital Multimeter
$133.35
Durable nylon carrying case
- Inside pocket for test leads.
- Elastic straps inside to hold
multiple instruments.
- With carry strap.
62
Models: EX510, EX520 (True RMS)
- 6000 count—high resolution.
- 0.09% accuracy.
- Min/Max/Relative/Data Hold.
- 20A max current.
Model EX530 (True RMS)
- 40,000 count—highest resolution.
- 0.06% accuracy.
- Min/Max/Relative/Data Hold.
- 20A max current.
- Peak Hold (AC only).
Model EX570 (True RMS)
- Type K thermocouple contact temperature
- InfraRed Thermometer w/laser point. measurements.
- 0.06% accuracy.
- Hold, relative and peak hold.
- 40,000 count - highest resolution.
- Min, Max and Average recording.
- Memory for storage and recall of
three measurements.
EX503
EX505
EX510
EX520
EX530
EX570
Industrial Multimeter (4000 count)
True RMS Industrial MultiMeter (4000 count)
Industrial MultiMeter (6000 count)
True RMS Industrial MultiMeter (6000 count)
True RMS Industrial Multimeter (40,000 count)
True RMS Industrial MultiMeter w/IR Thermometer
Carrying Case
Datacomtools.com
$23.20
TM
Sure-Grip Test Leads
- 39in. silicon insulated wire.
- Tips for low contact resistance.
- Measurement Category IV,
1000V per UL31010.
- Maximum current 10 amps.
- Lifetime limited warranty.
TSG-3
Sure-Grip Test Leads
$27.45
$94.99
$114.99
$149.00
$179.99
$219.99
$249.99
Professional MultiMeter
- Large backlit LCD display with easy-to-read 1” digits.
- Type K thermometer built-in for temp. measurements.
- Low current capability: measure down to 0.1μA.
- Input fuse protection and mis-connection warnings.
- Complete with CAT III test leads, multi-position tilt stand
and velcro strap for hanging, protective holster with test
lead holder, bead wire temperature probe, and 9V battery.
600.0, 2000µA; 6.000, 10.00A
600.0mV; 6.000, 60.00, 600.0, 1000V
600.0Ω; 6.000, 60.00, 600.0kΩ; 6.000, 60.00MΩ
40 Hz minimum , 100Hz to 60 kHz Maximum, depending on function and range
600.0nF; 6.000, 60.00, 600.0, 2000µF
6000-count LCD
CAT IV, 600V; CAT III, 1000V
Greenlee Multimeter Accessories
TC-20
Models: EX503, EX505 (True RMS)
- 4,000 count.
- 0.5% accuracy.
- Data Hold and Relative.
- 10A max current.
Model EX410/EX411
- True RMS (EX411)
- Manual Ranging
Model EX430
- True RMS (EX430)
- Autoranging
- Capacitance
- Frequency
Model EX450
- Built-in IR thermometer
- Autoranging
Model EX470
- Built-in IR thermometer
- True RMS
- Autoranging
- Capacitance
- Frequency
- Relative function
EX410
EX411
EX430
EX450
EX470
Manual Ranging MultiMeter
True RMS Manual Ranging MultiMeter
Autoranging MultiMeter
Autoranging MultiMeter + IR Thermometer
True-RMS Autoranging Multimeter + IR Thermometer
$49.99
$74.99
$94.99
$119.99
$149.99
Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply
Probe Light Kit
Stud Finder with AC Detection
- Reliable way to find AC voltage, wood & metal studs.
- Finds the edges of wood/metal studs up to 3/4”
deep through drywall.
- Non contact detection of AC voltage.
- Dual scanning for more flexibility.
- Deepscan mode finds the edges of wood or metal
studs up to 1 1/2” deep for thick construction such
as plywood, paneling or tile over drywall.
- Senses the changes in subsurface densities to pinpoint studs & joists, while detecting AC voltage.
- One year limited warranty.
L211 Probe Light Kit:
- Includes L200 Probe Light, TL71 Premium DMM Test Lead Set & C75 case.
- Small, rugged light easily attaches to any Fluke test probe.
- Flexible silicone test leads are heat and cold resistant.
- Zippered case has two inside pockets.
- Probe light frees both hands for work.
- 120 hours of battery life.
- Uses 2 3-volt watch batteries.
L211
Probe Light Kit
$48.95
SureGrip™ Master Accessory Set
SF-420AC
Kit includes all the SureGrip™ leads and probes in a handy roll-up pouch:
- AC220 SureGrip™ alligator clip set.
- AC280 SureGrip™ hook clip set.
- AC283 SureGrip™ pincer clip set.
- AC285 SureGrip™ large jaw alligator clip set.
- TP220 SureGrip™ test probe set.
- TL224 SureGrip™ silicone test lead set.
- 6-Pocket storage pouch.
TLK225
SureGrip™ Master Accessory Set
Stud Finder with AC Detection
Metal Locator
- Save time by eliminating rework, needless holes and
broken bits and sawblades.
- Finds both ferrous and non-ferrous metal and indicated depth up to 6” deep.
- Easy-to-read LCD identifies target location and depth.
- Indicates depth to nearest 1/2”.
- Automatically indicated if target is steel rebar or copper pipe (or any magnetic vs. non-magnetic material.)
- Easy-to-use, simple two button operation.
- One year limited warranty.
$122.95
SureGrip™ Kit with Probe Light and Probe Extender
Kit Includes:
- L200 Probe light.
- TP280 20 cm Test probe extenders.
- TP220 SureGrip test probes.
- TL224 SureGrip silicon test lead set.
- Foldable soft pouch with six pockets and hook-and-loop.
L215
SureGrip™ Kit with Probe Light and Probe Extender
SF-780
$72.55
- 1m long test lead with a safety shrouded, right angle banana connector on
one end and a stainless steel test probe on the other end, rated up to 10A.
- Insulated alligator clip rated up to 5A probe tip extender rated up to 3A.
- Modular test probe with banana connector in the handle, rated up to 10A.
- Modular hook & pinch style clip test lead w/banana connector rated up to 5A.
- Modular pinch-style clip test lead with banana connector, rated up to 5A.
- Modular alligator clip with banana connector, rated up to 5A.
- Bare spade lug with banana connector, rated up to 10A.
- CAT III 300V.
- Compatible w/multimeters that accept safety shrouded, banana connectors.
- One year warranty.
Deluxe Electronic Test Lead Kit
With the Fluke 561 infrared thermometer, you can also take
contact and ambient temperatures in the way that’s best
for you. Use the IR thermometer to measure hot, moving,
electrically energized, and hard-to-reach objects instantly.
Infrared and Contact Thermometer
561
5904A/POM
Deluxe Electrical DMM Test Lead Kit
Infrared Thermometer
62
Infrared Thermometer
63
Deluxe Multi-Use DMM Maxi-Kit
Major Credit Cards Accepted
$314.95
411D & 416D Distance Meters
Fluke Distance Meters are professional-grade laser distance
meters - they’re fast, easy to use, & they fit on your tool belt.
$90.00
- Reduce estimation errors, saving time and money.
- Instant measurements of the distance between two objects
with one-button operation.
- Quick calculations of distance such as area and volume.
- Easy distance addition & subtraction calculations.
Deluxe Multi-Use DMM Maxi-Kit:
- Silicon insulated 4ft (1.2m) leads with right angle plug.
- Modular probe set with replaceable tips.
- 5 sets of replacement tips.
- Retractable tip test probe set.
- Test lead coupler set.
- Medium alligator clip set.
- Large alligator clip set.
- Spade lugs.
- IC probe tip adapter.
- Minigrabber & Minipincer test clip leads.
5677B
$99.50
63 Infrared Thermometer
- High-resolution optics.
- High accuracy: 1 % and repeatability: 0.5 %.
- MAX temperature display.
- Laser targeting.
- Backlit display.
- Expanded measurement range up to 535°C (999°F).
$81.50
Deluxe Electrical DMM Test Lead Kit:
- Silicone insulated 4ft (1.2m) test leads.
- Modular electrical test probes with stainless-steel tips.
- Maxigrabber test clips with jaws.
- Maxigrabber test clips with hooks.
- Maxigrabber test clips with pincers.
- Large alligator clips.
- Nylon storage pouch.
$178.95
62 Infrared Thermometer
- Single point offset laser sighting.
- Best accuracy in its class: + 1% of reading.
- Holds temperature readings for 7 seconds.
- Dual displays shows current and MAX measurements.
- Backlit display for poorly lit areas.
- Comfortable ergonomic handle with protective rubber boot
for added durability.
- Fitted carrying case.
- Wide temperature range from -30º to 500ºC.
$122.95
Deluxe Electronic Bench DMM Test Lead Kit with Straight DMM Plugs:
- Silicone insulated 4ft (1.2m) leads fit meters from Fluke, HP, and others.
- Modular electronic test probes attach to leads.
- Extended fine-point adapters attach to probe tips.
- IC adapters attach to probes for secure probing on chip leads.
- Minipincer test clip leads for fine pitch chip leads.
- Minigrabber test clip leads extend the reach of the test leads.
Deluxe Electronic Bench DMM Test Lead Kit with Straight DMM Plugs
$189.00
561 IR and contact thermometer
Combines the temperature measurement functions that
industrial, electrical, and HVAC/R professionals need, all in
one tool. It measures both infrared and contact temperature, replacing several other test tools.
Test Lead Kits
6204A
Metal Locator
IR Thermometers
Deluxe Electronic Test Lead Kit
TL81A
$36.25
Laser Distance meters are better than ultrasonic devices
because they use laser light waves & measure their reflection
to accurately determine distances.
$105.00
411D
416D
Laser Distance Meter 30m/100ft max
Laser Distance Meter 60m/200ft max
1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com
$115.00
$235.00
63
MicroScanner2 Cable Verifier
MS2-100
The MicroScanner2 Cable Verifier presents a revolutionary change in voice, data, and
video cable testing. It starts by taking results from what was four different test modes
and displaying them all at once – graphical wiremap, pair lengths, distance to fault,
cable ID, and far end device. What’s more, its integrated RJ11, RJ45, and coax test ports support virtually
any type of low-voltage cable testing with no need for awkward adapters. The end result is reduced test
time and technician error. That makes high-quality installations more efficient than ever.
Today’s communications technicians have a lot more problems to deal with than just the cabling. They have
to rule out a whole host of potential cable and service issues before determining the cause of a connection
problem. MicroScanner2 acknowledges this, giving technicians high power vision to verify today’s most common voice, data, and video services. That means faster, more comprehensive troubleshooting
MS2-100 Includes:
- MicroScanner2 Cable Verifier
- Main wiremap adapter
- Multi-language Getting Started Guide
MS2-100
MS2-KIT
Microscanner2 Cable Verifier
MS2-KIT includes:
- MicroScanner2 Cable Verifier
- Main wiremap adapter
- Remote identifiers #2-7
- IntelliTone Pro 200 probe
- Shielded twisted-pair RJ45 patch cord
- RJ11 patch cord
- Clip-set RJ45 to 8 alligator clip bare wire adapter
- F Coax push on patch cord
MS2-KIT
MS2-TTK
$449.00
- Accessory soft pouch
- (2) AA alkaline batteries
- (1) 9V alkaline battery
- MicroScanner2 Getting Started Guide
- MicroScanner2 Owners CD
- IntelliTone Pro Getting Started Guide
- IntelliTone Pro owners CD
- Packaged in a deluxe Fluke Networks carry case
Microscanner2 Cable Verifier Kit
MS2-TTK Includes:
- MicroScanner2 Cable Verifier
- IS60 Pro-Tool Kit
- IntelliTone™ 200 Tone Probe
- RJ11 and RJ 45 patch cables
MS2-TTK
- User CD
- Batteries
- Fluke Networks carry pouch
$795.00
- Lanyard
- Owners CD and quick start guide
- 9 volt battery
- Packaged in a deluxe Fluke Networks carry case.
MicroScanner2 Termination Kit
$795.00
Perform physical cabling tests & wiring verification including length measurement.
- Tests for shorts, opens, miswires, reversals, and split pairs
- Measure cable length and send tone as tone generator
- Displays PASS icon for correctly wired T568A/B and 6-pin telephone cable
- Two-line, 16-character full alphanumeric LCD with icons for clear results
- Integrated jacks for Telco and Network connections, F-connector for coax
- Separate Telco, Coax, and Network mode buttons for easy test selection
- Cable test results displayed in wire map format along with diagnostic messages
- Auto-off and timed backlight in any mode for low power consumption and long battery life
Testifier Pro Cable Tester
TP650 TestifierPro Cable Tester, #1 Remote, Pouch
TP655 TestifierPro Cable Tester, #1 to 8 Remotes, Zippered Pouch
TP650
TP655
Jonard Holster Kits
TK-50
64
TK-22148
TK-375
Datacomtools.com
TM
TestifierPro Cable Tester
TestifierPro Cable Tester Kit
$215.00
$279.00
TK-50 includes:
- Can wrench
- Cable splicing Knife
- Electrician’s scissors
- Probe pick
- Belt Pouch
TK-22148 includes:
- Electrician’s Scissors
- Combo crimper long nose plier
- Belt Pouch
TK-375 includes:
- Fiber optic stripper
- Electrician’s scissors
- Belt Pouch
TK-50
TK-22148
TK-375
Five piece telecom installers kit
Telephone splicing kit
Fiber optic kit
$38.00
$32.25
$38.00
Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply
CI-Kits
CI-KIT2
CI-KIT
The CI kit provides all the tools that a telecommunications technician needs for day-to-day
activities. Included in the kit is an S814 impact tool with 66 and 110 termination blades, a
probe pic, electricians scissors, mini flathead screwdriver, and a cpt –web cable preparation
tool. These tools are stored in a handy , lightweight clip-on pouch which allows the installer to cut, strip, and
terminate cabling without having to carry separate tools or larger tool kits.
Siemon’s CI KIT2 builds upon the many benefits of the standard CI KIT but is larger to fit the popular AllPrep
Cable preparation tool in place of the cpt-web tool, and a “D-ring” has been added to carry additional tools.
These tools are stored in a lightweight clip-on pouch which allows the installer to cut, strip and terminate
cabling without having to carry separate tools or larger tool kits.
CI-KIT
CI-KIT2
Siemon Tool Kit
Siemon Tool Kit
$158.00
$193.75
PRO Network/Telco Installer Kit
Kit Includes
- 30-696 Ratchet Telemaster™
- 35-485 Punchmaster™ II Punch Down Tool with 110 Blade
- 35-473 Probe Pick & Spudger
- 45-165 Coaxial Stripper, 3/16 Inch to 5/16 Inch
- 35-088 Electrician’s Scissors w/Stripping Notch
- 35-497 Replacement Blade, Punchmaster™ II Turn-Lock™ Style 66 Blade
- 85-396 8-Position 8-Contact Round Solid, (RJ-45) (Package of 50)
- 35-535 Mechanic’s Tool Bag
33-506
PRO Network/Telco Installer Kit
$180.00
Master Series Network Service Kit
Kit Includes
- 30-696 Ratchet Telemaster™
- 35-485 Punchmaster™ II Punch Down Tool with 110 Blade
- 35-473 Probe Pick & Spudger
- 45-165 Coaxial Stripper, 3/16 Inch to 5/16 Inch
- 35-093 Cable Splicing Kit
- 35-497 Replacement Blade, Punchmaster™ II Turn-Lock™ Style 66 Blade
- 62-200 LinkMaster™ Tester
- 35-908 7-in-1 Twist-a-Nut™ Screwdriver/Nutdriver
- 33-864 Tone Generator and Amplifier Probe Kit
- 62-096 Smart6™ Modular Tester
- 45-719 Kinetic T-Stripper/Tel Crimp Tool
- 85-396 8-Position 8-Contact Round Solid, (RJ-45) (Package of 50)
- 35-410 Large Mouth Bag - 13 in. long
33-706
Master Series Network Service Kit
DataReady® PRO Kit
$375.00
A complete data cable installation kit providing everything to support the installer using
commonly-available connectors, and punchdown termination blocks. All tools contained
in a professional-quality, soft-sided zipper case with heavy-duty wrist strap.
Kit Contains:
- Data SureStrip™ Cat5e, Cat6, Phone Cutter/Stripper
- Untwist Tool
- Ergonomic CrimpALL/8000 Crimper Frame Only
- RJ45 WE/SS Die (8P8C)
- RJ11/12 WE/SS Die (6P6C, 6P4C, 6P2C)
- RJ22 Handset WE/SS Die (4P4C)
901378
Major Credit Cards Accepted
- RJ45 AMP Die (8P8C)
- RJ11 AMP DEC-MMJ Offset Die (6P6C)
- SurePunch® Pro PDT Handle & Light
- 110/66 Blade - SurePunch® & SurePunch® Pro PDTs
- Double 110 Blade-SurePunch® & SurePunch® Pro
- LAN ProNavigator™ Tester 1543
DataReady® PRO Kit
1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com
$329.00
65
Telecom Tool Kits
Fluke Networks’ Electrical Contractor Telecom Kits are comprised of industry standard telecommunications
tools and test equipment. Contents include: D®814 Impact Tool, Cable Stripper, Probe Pic, Electrican’s
D-Snips™, Standard 4-wire Modular Adapter and EverSharp® 66/110 cut blade. Soft carrying case included
for easy organization.
- Choose either kit I with TS®30 Test Set or kit II with Pro3000™ Analog Tone & Probe
- D814™ industry standard punchdown tool for reliable terminations
- EverSharp™ 66/110 Cut Blade provides flexibility for different block and jack terminations
- Cable Stripper quickly rings and slits many types of cable
- Use the Probe Pic to check for loose or damaged connections
- Cut and strip wire cleaner and faster with the Electricians’ D-Snips™
- Connect to jacks for testing with the Standard 4-Wire Modular Adapter
- A soft zippered pouch keeps your tools all in one convenient place
11290-000
11289-000
Electrical Contractor Telecom Kit I (with TS®30 Test Set)
Electrical Contractor Telecom Kit II (with Pro3000™ Analog T&P Kit)
11290-000
11289-000
$324.00
$227.00
Ultimate Tool Kits
Part #
900265
1116
1257
1555
6500
1780
1556
8000
2061
2062
2063
2064
2067
2687
3589
4571
4572
4573
4574
4575
4591
4599
1543
1573
1594
1821
1119
1907
1908
1280
2281
2282
2283
9645
9714
9715
1900
9546
1902
9520
1903
1923
1927
9546
901074
4941
4923
4932
4933
4934
4938
4939
66
Description
KT 8 Professional Cutter
Data SureStrip
LC CST CATV
SealTite® Pro Crimper
PowerPlay PT-510
Butt Set
All-in-One Data & Phone Tool (WE/SS-style)
Ergonomic CrimpALL8000 Crimper Frame Only
RJ45 WE/SS Die for CrimpALL® 800/1300 Series
RJ11/12 WE/SS Die, CrimpALL® 8000/1300 Series
RJ22 Handset Die for CrimpALL® 8000/1300 Series
RJ45 AMP Die for CrimpALL® 8000/1300 Series
RJ11 DEC-MMJ Die, CrimpALL® 8000/1300 Series
Dies for Crimp ALL 8000 & 1300 Series RJ45 & CATV
SurePunch® Pro PDT Handle Only
110/66 Blade - SurePunch® & Pro PDTs
110 Blade for SurePunch® & Pro PDTs
66 Blade - SurePunch® & Pro PDTs
BIX™ Blade for SurePunch® & Pro PDTs
Krone LSA Blade for SurePunch® & Pro PDTs
Double 110 Blade-SurePunch® & Pro
SurePunch® Pro PDT Detachable Light
LAN Pro Navigator™ Tester
Tone & Probe Plus Cable Check™
LAN & A/V Cable-Check™ - 1594
AM 35 Round Cable Slitter (1 - 1.4”)
SmartHome Data SureStrip®
BNC Extraction Tool
CATV
CST Pro Coax Stripper 3-Level (Green Cassette)
CST Pro Replacement Blade Orange
CST Pro Replacement Blade Black
CST Pro Replacement Blade Blue
RG59 Compression Cable TV F Connectors - 50 pack
RG6/6Q Compression RCA Connectors - 10 pack
RG6/6Q Compression BNC Connectors - 10 pack
Can Wrench
RJ45 WE/SS 8P8C Modular Plugs (Cat5 & E) - 10 pack
RJ45 Modular adapter (8-Way)
RJ11 WE/SS 6P6C Modular Plugs - 10 Pack
RJ11 Adapter
Untwist Tool
Flaring Tool for CATV “F”: RG6,RG6Q & RG59
Twisted Pair Modular Connectors
CATV “F” (female) to BNC (male) Adapter
GripPack Quick Release PDT Holder
Ultimate Tool Bag
Ultimate Technician Tool Kit
Ultimate Premise Service Kit
Ultimate DataReady Pro Kit
Ultimate Telco Technician Tool Kit
Ultimate Coax Compression Tool Kit
Datacomtools.com
TM
4932
•
­•
•
•
•
4933
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
4934
•
•
•
•
•
•
•
•
•
•
4939
•
4932
•
4933
•
•
•
•
•
•
•
•
4938
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
4934
4938
•
•
4939
$499.00
$385.00
$329.00
$485.00
$445.00
Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply
Premise Service Kit
Paladin’s data, voice, & coaxial LAN installation kit provides everything for twisted pair & coaxial cable installation. All tools
contained in a professional blow-mold case.
- 900265 KT 8 Cutter
- 1116 Data SureStrip™
- 1257 LC CST CATV
- 2062 CrimpALL® 8000/1300 Series
- 3590 SurePunch® Pro PDT Handle & Light
- 4572 110 Blade for SurePunch® & SurePunch® Pro PDTs
- 4573 66 Blade - SurePunch® & Pro PDTs
901039
- 1543 LAN ProNavigator™ Tester
- 1573 LAN Cable-Check™ & Telephone Test Set
- 1902 RJ45 Modular adapter (8-Way)
- 901074 CATV “F” (F) to BNC (M) Adapter
Ergonomic CrimpALL/8000 Crimper Frame Only
- Die for CrimpALL 8000 & 1300 Series RJ45 &
- CATV RJ11/12 WE/SS Die
Premise Service Kit
$387.35
DataReady Kit
The complete Category 5 datacom tool set in a handy zipper case! Everything needed for a CAT-5 installation
except the cable.
Kit Includes:
- 1116 Data SureStrip
- 1556 All-in-One Data & Phone Tool
- 3570 SurePunch Handle
- 4571 110/66 Blade
- 1576 Data/Link ID & Cable-Check
- 9546 RJ45 WE/SS Modular Plugs
- One-year Warranty on Kit
901053
DataReady Kit
CrimpALL® Packs
$169.00
Contains the ergonomically designed CrimpALL® tool frame & the four most popular datacom die sets in a
rugged nylon pack with belt loop and wrist strap.
4803 Includes:
- RJ11/12 WE/SS Die, CrimpALL® 8000/1300 Series
- RJ22 Handset Die for CrimpALL® 8000/1300 Series
- Die for CrimpALL/8000 & 1300 Series RJ45 & CATV
- Die for CrimpALL/8000 & 1300 Series - Insulated
Terminal & Lug
4803
4801
1300 Packs
4801 Includes:
- RJ45 WE/SS Die for CrimpALL 8000/1300 Series.
- RJ11/12 WE/SS Die, CrimpALL 8000/1300 Series.
- RJ22 Handset Die for CrimpALL 8000/1300 Series.
- RJ11 DEC-MMJ Die, CrimpALL 8000/1300 Series.
CrimpALL® DIY Home Pack
CrimpALL® Data Pack
$138.00
$121.45
Contains the four most popular datacom die sets and Paladin’s new Lil Splitter! 1300 Series crimp tool frame
and four die sets in rugged black nylon pack with belt loop and wrist strap.
4301 Includes:
- Ergonomic CrimpALL/8000 Crimper Frame Only
- RJ11/12 WE/SS Die (6P6C, 6P4C, 6P2C) - 2062
- RJ22 Handset WE/SS Die (4P4C) - 2063
- RJ45 WE/SS & CATV F Die - 2687
- Die for CrimpALL/8000 & 1300 Series - Insulated
Terminal & Lug - 2035
4301
4303
Major Credit Cards Accepted
4303 Includes:
- 1300 Series Crimp Frame Only - 1302
- RJ11/12 WE/SS Die (6P6C, 6P4C, 6P2C) - 2062
- RJ22 Handset WE/SS Die (4P4C) - 2063
- RJ45 WE/SS & CATV F Die - 2687
- Die for CrimpALL/8000 & 1300 Series - Insulated
Terminal & Lug - 2035
1300 Data Pack
1300 DIY Home Pack
1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com
$117.89
$110.00
67
Network Tool Kits
This convenient kit is perfect for small offices or students just starting out. It includes the essential tools
needed to easily install networks or to make quick repairs.
4929 Includes:
- SureStrip UTP/STP & flat stain cutter/stripper
- All-in-one Phone/Data Crimper
- Non-Impact 110 Punchdown Tool
- (20) RJ45 plugs, Cat5e, solid/stranded; flat/round cable
- Zipper case with carrying strap
4909 Includes:
- Data SureStrip
- Economy All-in-One Phone & Data Tool (WE/SS)
- 110 Non-Impact Punchdown Tool
- RJ45 WE/SS 8P8C Mod. Plugs (Cat5e, Cat5) x 10
Basic LAN Tool Kit
Network Tool Bundle
4929
4909
$82.65
$56.75
Computer Service Kit
For repair and maintenance of desktop computers & electronic equipment.
Kit includes:
- 3.6V cordless screwdriver, battery & charger
- ESD wrist strap
- 30-watt soldering iron
- Desolderer & soldering aid with pick & scraper/cutter tip
- 2 needle nose pliers
- Angled-head lead cutter
- Insulated tweezers
- Component gripper & IC extractor
- 10-piece driver socket set
- 24-piece driver bit set: Torx, Hex, Phillips,
Pozidrive, Slotted & Square-Head
- Socket adapter/extender & socket bit holder/extender
Computer Service Kit
4370
$109.20
Starter Kits
Part #
1556
1116
3570
4572
6500
9546
3580
Description
DataSure® UTP/STP cutter/stripper
Datacomm scissors
All-in-One phone/data crimp tool
SurePunch® punchdown tool
110 reversible blade
PT-510 PowerPlay 18-Tools-in-One
(10) RJ45 Cat5e modular plugs
Compact zipper case
110 Non-impact punchdown tool
4919
•
•
•
•
•
•
•
•
4908
•
•
•
•
•
4918
•
•
•
•
125.00
98.00
•
•
75.95
4919
4918
Grip Packs
4945
Part #
1116
1925.1
3589
4940
4571
4599
3570
68
Description
Data SureStrip
Datacom & Telecom Scissors
SurePunch® Pro PDT Handle only
GripPack Quick Release Tool Holster
110/66 Blade - SurePunch & Pro PDTs
LED Light
SurePunch Handle
PT-540
Hex bit adapter
Datacomm Snips
Mini Maglite with 2 AA Batteries
Black Sharpie® Pen
Datacomtools.com
TM
4941
•
•
•
•
•
•
•
•
121.45
4942
•
•
•
•
•
•
110.10
4943
•
•
•
•
•
•
•
113.35
4945
4946
•
•
•
•
•
•
•
139.98
•
4946
•
95.95
Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply
Black Attaché Tool Kits
TCMB150ST Contains:
- 23 Individual Hand Tools
- Popular WP25 Weller® 25 Watt Soldering Iron
- 24 Series 99® Interchangeable Screwdriver/Nutdriver Blades & Handles
- XL75 Offset Ratchet Screwdriver Set
- Measuring Tape
- Solder
- Length 17 3/4” (451mm)
- Width 12 5/8” (321mm)
- Depth 4 3/4” (121mm)
TCMB100ST Contains:
- 53 Individual Hand Tools
- 31 Series 99 Interchangeable Screwdriver/Nutdriver Blades & Handles
- 2 Specialized Screwdriver and Nutdriver Kits
- Length 17 3/4” (451mm)
- Width 12 5/8” (321mm)
- Height 5 3/4” (146mm)
TCMB100STW Contains:
- 53 Individual Hand Tools
- 31 Series 99 Interchangeable Screwdriver/Nutdriver Blades and Handles
- 2 Specialized Screwdriver and Nutdriver Kits
- Length 18”
- Width 15”
- Depth 8”
TCMB150ST
TCMB100STW
TCMB100ST
Black Polyethylene Attaché Tool Kit
Black Attaché Tool Kit w/Wheels
Black Polyethylene Attaché Tool Kit
$689.50
$992.25
$856.80
Aluminum Attaché Tool Kits
TCA100ST Contains:
- 53 Individual Hand Tools
- 31 Series 99 Interchangeable Screw/Nutdriver Blades & Handles
- 2 Specialized Screwdriver and Nutdriver Kits
TCA150ST Contains:
- 23 Individual Hand Tools
- 24 Series 99 Interchangeable Screw/Nutdriver Blades and Handles
- XL70 Offset Ratchet Screwdriver Set
- Measuring Tape
- Solder
TCA100ST
TCA150ST
Aluminum Attaché Tool Case w/Tools
Aluminum Attaché Tool Case w/Tools
- Length 17 5/8” (448mm)
- Width 12 5/8” (321mm)
- Height 7 7/8” (200mm)
- Length 17 5/8” (448mm)
- Width 12 5/8” (321mm)
- Height 5 3/4” (146mm)
$1008.00
$798.00
Rugged Codura® Tool Kit
TCS100ST Contains:
- 53 Individual Hand Tools
- 31 Series 99 Interchangeable Screw/Nutdriver Blades and Handles
- 2 Specialized Screwdriver and Nutdriver Kits
TCS150ST Contains:
- 23 Individual Hand Tools
- Popular WP25 Weller25 Watt Soldering Iron
- 24 Series 99® Interchangeable Screw/Nutdriver Blades and Handles
- XL75 Offset Ratchet Screwdriver Set
- Measuring Tape
- Solder
TCS100ST
TCS150ST
Rugged Cordura Tool Case - with Tools
Rugged Condura Tool Kit
Major Credit Cards Accepted
- Length 17” (432mm)
- Width 12” (305mm)
- Depth 3 1/4” (83mm)
- Length 17” (432mm)
- Width 12” (305mm)
- Depth 3” (76mm)
$768.60
$572.25
1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com
69
Basic Data & Video Kit
Data/Video Kit
- Basic Data and Video Kit
- Data T-Cutter
- UTP Stripper
- Stripmaster wire stripper for RG-6
- Punchmaster II punchdown tool w/110 blade
- OmniSeal XL compression tool
- TRACETone tone generator & amplifier probe
- VDV Multimedia cable tester
- Journeyman electrician’s tote
33-916
Basic Data & Video Kit
- Data/Video Kit
- Data T-Cutter
- 7-in-1 Screwdriver
- UTP stripper
- Coax stripper w/ replacement cartridge
- Punchmaster II punchdown tool w/110 blade
- 110/66 Blade combo punch down blade
- Crimpmaster crimp tool for RJ-45 modular plug
- OmniSeal XL compression tool
- Probe pic and spudger
- Plus Other Items
$395.00
RJ-45, RJ-11 Telemaster™ Kit
33-917
Basic termination kit for 10Base-T.
- UTP/Coax Stripper
- Telemaster RJ-11/RJ-45 Tool
- 50 8-Position RJ-45 Non-Keyed Solid Plugs
- Durable hard case
- Telemaster™ for RJ-11/RJ-45 Plugs
- 15 4-Position, RJ-11 stranded modular plugs
- 15 6-Position, RJ-11 stranded modular plugs
- 15 8-Position, RJ-45 stranded modular plugs
- Durable hard case
RJ-45, RJ-11 Telemaster™ Kit
$68.15
10Base-T Crimpmaster™ RJ-45 Kit
33-750
$240.00
Coax Termination Hip Kit
33-945
Coax Termination Hip Kit
$115.00
Lil’ Buttie Pro Telephone Test Set
- 30-793 OmniSEAL Pro XL Compression Tool
- 45-074 Data T Cutter
- 45-603 Coax/UTP Cable Stripper
- 89-044 OmniCONN RG-6 Compression F Connectors
- 89-572 RG-59 RCA Compression Connectors
- 89-582 RG-6 RCA Compression Connectors
33-635
Lil’ Buttie Pro Telephone Test Set
Datacomtools.com
TM
RCA Compression Connector Kit
$158.00
High-Powered Telco Field Kit
- Lil’Buttie Pro™ with bed-of-nails cord set
- Headset and a Two-Piece Belt Clip
- High sensitivity tone tracer with a round tip/paddle
style tip.
- Multi-function turbo-tone™ generator w/alligator clips
- 7.5” Cable assembly with 2 no-fault RJ12 connectors
- Cordura™ Pouch
- LB220 Lil’ Buttie PRO Telephone Test Set
- TT100 Tracer Probe, round and paddle-style tips
- TG100 Tone Generator
- Belt Clip
- Mini headset
- 1.22m (4ft) RJ11 to angled bed-of-nails cord set
- 60.96cm (2ft) RJ11 to alligator clips set
- 19cm (7.5 in) RJ12 to RJ12 cable for no-fault
connection to RJ11 or RJ45 jacks
- Lanyard
- Pouch
70
$625.00
- This kit is great for any contractor or installer doing
custom Audio/Video installs
- 30-793 OmniSEAL Pro XL Compression Tool
- 45-074 Data T Cutter
- 45-603 Coax/UTP Cable Stripper
- 36-240 Cabinet Tip Electronic Screwdriver
- Sample pack of RTQ Compression Connectors
KP400
Pro Installer Kit
RCA Compression Connector Kit
Ideal for anyone who is installing security
cameras, cable or satellite TV, or working with
general coax compression installations.
33-624
$115.00
- Large Mouth Bag
- 110/66 Blade
- 66 Blade only and Punch master II 110 Blade only
- Lever-Snipes Electrician’s Scissors
- Probe Pic and Spudger
- Two different Strippers
- 7-in-1 Twist-a-Nut Screwdriver and Nutdriver
- Mag-Tape Tape Measure
- Torpedo Level
- Plus Other Items
- Data T®-Cutter
- UTP/Coax Stripper
- Crimpmaster™ Frame Only
- 8-Position Die Set for RJ-45 Plugs
- 200 8-Position RJ-45 Non-Keyed Solid Plugs
- Durable hard case
10Base-T Crimpmaster™ RJ-45 Kit
Economy 10Base-T Telemaster™ Kit
Pro Installer Kit
Termination kit for 10Base-T
33-652
$525.00
Economy 10Base-T Telemaster™ Kit
Basic kit with multifunctional telephone tool to
cut, strip, and crimp.
33-704
Data/Video Kit
$255.00
KP401
High-Powered Telco Field Kit
$269.95
Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply
Security/AlarmTone Generator and Tone Tracer Probe
Deluxe Resi Kit
KP312
- Resi-Tester
- Resi-Toner
- Resi-Talker Test Set
- Resi-Tracer
- Replacement #1 Coax Remote Identifier
- 12in. Cable Assembly, RJ45/Alligator Clips
- Cord Sets - Alligator Clips
- 48” Cord Set
- Set of 20 (1-20) Coax Remote Identifiers For Resi-Tester™
- TP312: Set of 20 (1-20) RJ45 Wiremappers
- Instruction Manual
Deluxe Resi Kit
$498.00
- TG300 Latch-Test Security/AlarmTone Generator with molded
alligator clips cord set
- TT100 Tone Tracer Probe, round and paddle-style tips
- 19cm (7.5 in) RJ12 to RJ12 cable for no-fault connection to
RJ11 or RJ45 jacks
- Lanyard
- Pouch
KP106 Security/AlarmTone Generator & Tone Tracer Probe $135.00
Pro’s Electronic Tool Kit (110V)
- Utility component storage box
- Long nose plier 135mm
- Diagonal cutting plier 110mm
- Flat nose plier 135mm
- Bent nose plier 130mm
- Dual Color Lineman’s plier
- Reverse action tweezer
- Drill set w/adaptor 110V/220V
- 3pcs soldering aid tools
- Soldering iron stand with sponge
- Adjustable wrench 6”
- Soldering iron 110V/220V
- Pro-soft s/d 3/16” or 5mm
- Pro-soft s/d 1/4” or 6mm
- Pro-soft s/d 3.2x75mm
- Pro-soft s/d #0x75mm
- Pro-soft s/d 5.0x75mm
- Pro-soft s/d #1x75mm
- Pro-soft s/d 6.0x57mm
- Pro-soft s/d #2x57mm
- Pro-soft s/d #2x157mm
- Pro-soft s/d #1x150mm
- Pro-soft s/d 6.0x40mm
- Pro-soft s/d #2 x40mm
- Crimping tool inch/metric
- Desoldering pump
- Precision s/d set 6pcs
- 5pcs needle file set
- Mini-vacuum kit
- Cleaning fluid, head (60cc)
- Cleaning fluid, head (18cc)
- 3-1/2 digital multimeter
- Testing screwdriver
- IC extractor
- Pallet for 1PK-900N
- Flash light
1PK-1900NA
HDTV Video RF Coaxial Cable Tool Kit
Pro’s Electronic Tool Kit (110V)
$295.00
Telco Termination Kit
- Die Set (SQ.041”,HEX.068”,.178”,.255”,.278”)
- Die Set(SQ.042”,HEX.197”,.278”)
- Die Set(SQ.042”,HEX.068”,.275”,.278”)
- Die Set(SQ.042”,.052”, HEX.068”,.255”,.324”)
- Die Set(SQ.042”,HEX.178”,.275”)
- Die Set (SQ.042”,HEX.068”,.0178”,.197”,.255”)
- Supercrimp Crimp Tool Frame
- Rotary Coaxial Cable Stripper(RG-58/59/62/3C/4C)
- Forging Cable Cutter (160mm)
- All-in-one Toner & Probe Kit
PK-4012
- 7pcs folding type hex key set
- 3 prong holder
- PVC insulated tape
- Stainless scissors 6”
- Solder core 63%, SN
- Bit T10x30mm
- Bit T15x30mm
- Wrist strap 10FT
- Utility knife (3 blades self loading)
- 10pcs electronic combination wrench
- Hobby vise
- Aluminum frame tool case w/1 pallet
HDTV Video RF Coaxial Cable Tool Kit
- Precision Wire Stripper
- Pro-Crimper Modular Tool
- UTP/STP Cable Stripper
- 6-position 4 contact flat stranded (50 pcs)
- 4-position 4 contact flat stranded (50 pcs)
- 8-position 8 contact round stranded (25 pcs)
- RJ-45 protection cap (20pcs/bag)
- Molded Case
$229.00
1PK-937E
Telco Termination Kit
$60.00
Network Maintenance Kit
- IC extractor, Folding hex wrench
- 6” adjustable wrench
- 6” forceps, Inspection mirror
- Mini-flashlight
- 5” diagonal cutter
- Desoldering pump
- Wire stripper (AWG 30-20)
- 5” snipe nose pliers
500-006
- Rotary coax stripper
- Modular plug crimper
- Assorted screw drivers
- Coax crimper
- Soldering iron
- Zipper bag
Network Maintenance Kit
Lan Data Installers Kit
$158.00
Cable Service Kit
- MT-7068: All-in-one toner & probe kit
- CP-373: Pro-crimper modular tool
- 8PK-314BR: Impact & punchdown tool
- CP-505: Universal stripping tool (UTP/STP, RG59/6/7/11)
- 1PK-SD006: 6-in-1 magnetic quick change screwdriver
- SR-332: All purpose snip
- 9ST-PK4015: Carrying zipper case
- Punchdown tool with two blades (110 and 66 Styles)
- Ratcheted modular plug crimper
- LAN tester with remote
- UTP stripper
- Assorted modular plugs and boots
500-021
Lan Data Installers Kit
Major Credit Cards Accepted
$150.00
902-241
Cable Service Kit
1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com
$150.00
71
VoIP Kit
- 6” Long nose plier
- 6” Side cutting plier
- Utility component storage box
- Probe-pic spudger
- 6 In 1 magnetic quick change screwdriver
- Telecom mini-test set
- Connector-crimping plier
- Double end socket can wrench
- 3 in 1 Wire stripper tool
- In-line modular adapters 4/6/8 pin
902-299
- All-in-one toner & probe kit
- Punch down tool with 110/66 blades
- 4P/6P/8P telcom crimping tool
- Deluxe portable tool bag
• Case size: 390x250x245mm (15.4”x9.8”x9.6”)
• Individual packing: Color label+shink
VoIP Kit
$435.00
Electronics Master Kit (110V)
- Utility component storage box
- Long nose plier 135mm
- Diagonal cutting plier 110mm
- Dual Color Lineman’s plier
- Bent nose plier 130mm
- Side cutting plier 150mm
- Dual Color Long nose plier
- 3pcs soldering aid tools
- Soldering iron stand with sponge
- Adjustable wrench 6”
- Soldering iron 110V or 220V
- Pro-soft s/d 3/16” or 5mm
- Pro-soft s/d 1/4” or 6mm
- Pro-soft s/d 3.2x75mm
- Pro-soft s/d #0x75mm
- Pro-soft s/d 5.0x75mm
- Pro-soft s/d #1x75mm
- Pro-soft s/d 6.0x100mm
- Pro-soft s/d #2x100mm
- Pro-soft screwdriver 6.0x40mm
- Pro-soft screwdriver #2 x40mm
- Desoldering wick
- 6pcs electronic screwdriver set
- Crimping tool inch/metric
- Desoldering pump
- 5pcs needle file set
- Testing screwdriver
- Alignment tool (200mm/2.0mm)
- IC extractor
- 7pcs Folding type hex key set
- 6pcs open-end wrench set
- Heavy Duty Claw Hammer
- PVC insulated tape
1PK-1700NA
- Stainless scissors 6”
- Solder core 63%, SN
- Parts tube
- Heat sink
- Utility knife (3 blades)
- Measuring tape 3M/10FT
- Inspection mirroe
- Slip-channel pump pliers 254mm
- Pallet for 1PK-1700N serios
- Top Pallet for 1PK-1700N serios
- Carrying tool case
Electronics Master Kit (110V)
$225.00
Telecom Installation Kit
- PM-736: Dual color long nose plier 136mm
- PM-737: Dual color diagonal cutting Plier 125mm
- CP-376KX: Professional Modular Crimps Strips & Cuts tool
- CP-3140: Punch down tool 110 blade
- MT-7051N: Multi-modular cable tester
- MT-8001: Butt Set
- SD-202A: Pro-soft screwdriver 5x75mm
- SD-207A: Pro-soft screwdriver 6x100mm
- SD-207B: Pro-soft screwdriver #2x100mm
- SD-220B: Pro-soft screwdriver #2x40mm
- ST-2012H: Soft side tool pouch (305x235x95mm)
- Individual packing: Color Box
PK-12012H
Computer Service Tool Kit
Computer Service Tool Kit
- 3 Piece Anti-Static Align Tool
- Precision Wire Stripper
- 4” Micro Cutting Pliers
- 7 Piece Folding Hex Wrench
- 5” Electricians Scissors
- 6 Piece Screwdriver Set
- Punchdown Tool w/110 Blade
- Plus Other Items
$52.99
Premise Pro Kit
500-043
72
Computer Maintenance Kit
$458.00
Communications Maintenance Kit
- 4P/6P/8P telcom crimping tool
- Punch down tool with 110/66 blades
- All-in-one toner & probe kit
- In-line modular adapters 4/6/8 pin 3 in 1
- Compression tool for RG59/RG6/RG11 type
waterproof connectors
- Universal stripping tool(UTP/STP/RG-59/6/7/11)
- Zipper bag
902-296
$199.00
Computer Maintenance Kit
- 5” Diagonal Cutter
- 5” Long-Nose Pliers
- All-in-One Crimp Tool
- Tweezers
- IC Extractor and Inserter
- Desoldering Braid & Solder
- 8-Bit Pack
- Plus Other Items
500-003
Telecom Installation Kit
Premise Pro Kit
Datacomtools.com
$375.00
TM
- 5” Cutters
- 5” Needle-Nose Pliers
- 5” Micro Cutters
- 6” Adjustable Wrench
- Wire Stripper/Cutter
- Quick Heat Soldering Iron
- Desoldering Braid
- PLCC Extractor
- Plus Other Items
500-026
Communications Maintenance Kit
$140.00
Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply
Basic Twisted Pair & Coax Kit
Master Network Installation Kit
Features the EZ-RJ45® Crimp Tool & connectors for the
simplest, fastest & performing installation of Category
5/5e networks. Includes the tools for CATV installations.
- “Super Crimp” Frame
- RJ45, RJ22, & RJ11 Die Set,
- RG58, RG59, 62 BNC, TNC Die Set
- RG58, RG59, 62 A/U Die Set
- Punchdown w/110/66 Blades
- Rotary Coax Stripper
- Cable Cutter
- Plus Other Items
500-020
Master Network Installation Kit
- Punchdown tool with 110 blade
- EZ-RJ45® Crimp Tool
- Cable Cutter
- Cat5 Jacket Stripper & Universal Coax Cable Stripper
- F Connector Assembly/Removal Tool
- 10 EZ-RJ45® Connectors and a nylon zippered case
90121
$499.00
Twisted Pair Termination Kit
This kit includes all of the necessary tools for twisted pair
and coaxial terminations.
- SealSmart Compression Crimp Tool.
- EZ-RJ45® Crimp Tool.
- F Connector Assembly/Removal Tool.
- Coax and Round Wire Cable Cutter.
- Cat5 Jacket Stripper & Universal Coaxial Cable Stripper.
- Punchdown Tool w/110 style blade and a nylon
zippered case.
- Punchdown tool with 110 style blade.
- EZ-RJ45® Crimp Tool.
- BTP-6 Coax & Data Cable Cutter.
- Cat 5 Cable Jacket Stripper.
- 10 EZ-RJ45® Connectors & a nylon
zippered case.
Twisted Pair Termination Kit
90124
$153.00
Master Electrician Tool Kit
Qty
Includes:
- Bags & holsters: 3
- Pliers:
4
- Wire Strippers: 3
- Screwdrivers:
6
- Knives:
1
- Hacksaws:
1
- Awl:
1
- Wrench:
- Hex Key:
- Tape measurer:
- Levels:
- Hammers:
- Gloves:
- Testers:
Qty
1
1
1
1
1
1
1
Qty
Includes:
- Bags & holsters: 1
- Pliers:
4
- Wire strippers:
3
- Screwdrivers:
4
Master Electrician Tool Kit
- Tape measurer:
- Levels:
- Hammers:
- Testers:
Qty
1
1
1
1
- Weight: 9.7lbs
0159-12
$404.95
Electricians Tool Kit
Journeyman’s Tool Kit
$259.00
Starter Electrician’s Tool Kit
Perfect kit for the professional or apprentice electrician.
Includes:
- Pouch & belts:
- Pliers:
- Wire strippers:
- Screwdrivers:
- Tape measurer:
Perfect kit for the beginner electrician. Four pocket
heavy duty tool leather tool pouch holds an
assortment of four professional hand tools.
Qty
2
4
1
6
1
Includes:
- Bags & holsters:
- Pliers:
- Wire strippers:
- Screwdrivers:
Electricians Tool Kit
Qty
1
1
1
2
- Weight: 2.25lbs
- Weight: 7.75lbs
$180.00
Master Electrician’s Kit
0159-14
Starter Electrician’s Tool Kit
$62.95
Large Mouth 20” Kit
Includes:
- Bags & holsters
- Pliers
- Wire strippers
- Screwdrivers
- Knives
- Hammers
- Testers
- Tape measurer
- Levels
35-809
$205.00
Perfect Kit for the Journeyman Electrician.
- Weight: 19.7lbs
0159-13
PRO Twisted Pair & Coaxial Tool Kit
Journeyman’s Tool Kit
Designed with the Master Electrician in Mind.
0159-11
$169.00
PRO Twisted Pair & Coaxial Tool Kit
The perfect solution when working with
twisted pair cable for telephone and
data communications installations.
90122
Basic Twisted Pair & Coax Kit
Master Electrician’s Kit
Major Credit Cards Accepted
Qty
1
3
2
6
1
1
1
1
1
$507.55
Includes:
- Bags & holsters
- Pliers
- Wire strippers
- Screwdrivers
- Crimp tools
- Knives
- Hammers
- Pullers
- Tape measurer
- Hacksaw
35-808
Large Mouth 20” Kit
1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com
Qty
1
3
2
4
1
1
1
1
1
1
$313.99
73
Journeyman Electrician’s Kit
Electrician’s Standard Tool Pouch Tool Kit
Includes:
- Bags & holsters
- Pliers
- Wire strippers
- Screwdrivers
- Knives
- Levels
- Pullers
- Tape measurer
Journeyman Electrician’s Kit
35-790
12-Piece Set WM
$430.00
Qty
2
4
1
4
1
12-Piece Set
$220.00
5-Piece Set
6-Piece Hip Kit
Qty
1
1
1
1
1
1
Qty
1
1
1
2
Includes:
- Bags & holsters
- Pliers
- Wire strippers
- Screwdrivers
35-5792
$95.65
5-Piece Set
$57.40
O LS N
I
NC
Tool Holsters & Bags
D
OT
TO
35-805
$185.50
Includes:
- Bags & holsters
- Pliers
- Wire strippers
- Screwdrivers
- Knives
- Tape measurer
LUDE
Multi-Purpose Tool Holder
Securely holds small tools
3-Pockets
CLC1103
$6.25
Multi-Purpose Tool Holder
Securely holds small tools
4-Pockets
CLC1104
$7.15
Cell Phone/Tool Holder
Holds compact cell phones.
Securely holds small tools
5-Pockets
CLC1105
$15.05
Electrical/Maintenance Pouch
3 Internal pocket sleeves and 6
external pockets.
CLC1503
$18.50
25 Pocket BriefBag
25 Multi-use pockets for tools and
business accessories
W: 16” H: 12 1/2” D: 1 1/2”
CLC1122
$39.05
O LS N
Tool Bags
D
I
NC
OT
TO
Includes:
- Bags & holsters
- Pliers
- Wire strippers
- Screwdrivers
- Tape measurer
Qty
2
4
1
4
1
6-Piece Hip Kit
35-794
Electrician’s Standard Tool Pouch Tool Kit
12-Piece Set
Includes:
- Bags & holsters
- Pliers
- Wire strippers
- Screwdrivers
- Tape measurer
35-5805
35-800
$270.00
12-Piece Set WM
Qty
1
4
2
3
1
1
1
1
2
Includes:
- Bags & holsters
- Pliers
- Wire strippers
- Screwdrivers
- Deburring tool
- Hammer
- Tape measurer
- Knives
- Tester
Qty
1
3
1
4
1
1
1
1
LUDE
Two Bag Combo
One: 12” x 4 1/2” x 5 1/2”
One: 14” x 5 1/2” x 6”
CLC1107
74
$19.65
24” All Purpose Gear Bag
All-purpose gear bag perfect for
carrying kneepads, power tools,
extension cords, etc.
L: 24” W: 12” D: 12”
CLC1111
Datacomtools.com
TM
$37.85
Extra Large Tote Bag
17 Multi-use outside pockets
organize tools and accessories.
L: 18” W: 7” H: 9”
CLC1113
$25.95
Double Zipper Tote Bag
9 Multi-use pockets inside
41 outside organize tools.
L: 18” W: 6” H: 9”
CLC1115
$37.85
Standard Tool Tote
8 multi-use pockets inside
8 outside to organize tools.
L: 14” W: 5 1/2” H: 6”
CLC1116
$21.20
Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply
I
NC
Tool Bags and Cases
D
TO
OT
O LS N
LUDE
33 Pocket Small Tote Bag
11 Multi-use pockets inside and
22 outside
L: 11” W: 4” H: 8”
CLC1126
$23.70
12” Tote Bag w/Top Plastic Tray
3 Pockets Inside
& 3 Outside
L: 11” W: 9” H: 10”
1533
$34.95
20” Open Top Softsided Tool Box
27 Multi-use pockets
& 6 webbing loops.
L: 20“ W: 11” H: 11”
CLC1579
$82.35
12” Standard BigMouth™ Bag
17 Pockets Inside
& 6 Outside
L: 12” W: 8.5” H: 8”
CLC1161
$25.45
18” Tote Bag w/Swivel Parts
14 Multi-use outside pockets
& 8 inside pockets
L: 18” W: 9” H: 11 1/2”
1544
$54.35
Electrical/Maintenance Tool Carrier
Pockets for drill bits and tips, cell
phone, electrical tester, strap, etc.
L: 23” W: 12” H: 15”
CLC1530
$65.15
49 Pocket Tote-In-A-Bag
75 Pocket-Tool Backpack
Outside Bag: 2 inside pockets &
Enough interior panels to hold a multi14 outside pockets
tude of tools including: 14 pc wrench
Small Inside Tote: 11 inside pockets
sets, electric drills and much more.
& 22 outside pockets
W: 13” H: 17 1/2” H: 9”
CLC1127
$50.85
CLC1132
$155.00
Electrical/Maintenance Tool Carrier Electrical/Maintenance Tool Pouch
23 Pocket Box-shaped design
27 Pocket Box-shaped design
prevents tipping.
prevents tipping.
L: 8” W: 8” H: 15”
CLC1527
$41.70
CLC1526
$49.10
Major Credit Cards Accepted
18” Megamouth Tote Bag
13 Multi-use pockets inside
& 18 outside
L: 18” W: 11” H: 12”
CLC1163
$58.35
16” Tote Bag w/Top Plastic Tray
10 Pockets inside
& 13 pockets outside
L: 16” W: 8” H: 11”
1534
$48.95
14” Open-Top Soft Sided Tool Box
21 Multi-use pockets
& 10 webbing loops
L: 14“ W: 11” H: 11”
CLC1578
$65.15
18” Multi-Compartment Carrier
54 Pockets Inside
& 4 Outside
L: 18” W: 7” H: 14”
1539
$84.95
Large Electrical/Maintenance Carrier
16 Multi-use outside pockets
& 7 inside
L: 11” W: 10” H: 19”
CLC1528
$54.60
24” Roller Tote Bag
23 Multi-use pockets inside
& 7 outside
L: 24” W: 11” H: 12”
CLC1167
$78.90
Standard BigMouth Bag
11 Multi-use pockets inside
& 22 outside
L: 14” W: 7” H: 10”
CLC1135
$31.85
18” Softsided Tool Box
21 Multi-use outside pockets & 12
inside pockets
L: 18” W: 9 1/2” H: 14”
1572
$54.95
13” Multi-Compartment Carrier
23 Pockets Inside
& 10 Outside
L: 13” W: 7” H: 13”
1537
$55.98
18” Tote Bag w/Top Plastic Tray
13 Pockets Inside
& 24 Outside
L: 18” W: 11” H: 11”
1535
$55.95
Large BigMouth Bag
13 Multi-use pockets inside
& 26 outside
L: 18” W: 8” H: 12”
CLC1136
$43.80
12” Softsided Tool Box
12 Multi-use outside pockets
& 8 inside pockets
L: 12” W: 8 1/2” H: 14”
1570
$39.99
Open-and-Closed-Top Tool Carrier
Closed zipper compartment includes
16 open pockets & elastic strap for
hex bit storage
L: 13” W: 7” H: 12”
CLC1574
$58.70
Open Top Tool Bag w/Molded Base
Zipper Top Carrier w/Molded Base
12 External pockets, including 2 over12 External pockets, including one
size pockets & one closed flap pocket.
closed flap pocket.
Interior includes 5 pockets, 6 webbing
8 Inside pockets, with 4 webbing
loops, & elastic strap for hex bit storage.
loops and a zipper pocket.
CLC1581
$75.75
CLC1582
1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com
$75.75
75
I
NC
Tool Bags and Cases
D
TO
OT
O LS N
LUDE
Triple Zippered Tool Carrier
18 Multi-use outside pockets
& 9 inside pockets
L: 10” W: 10” H: 11”
$38.40
CLC1108
CLC1148
$19.65
48 Pocket - Bucket Pockets
14 Double row pockets inside
& 34 triple row outside pockets
CLC1119
$18.55
30 Pocket Bucket Pockets
16 Multi-size pockets inside
& 14 outside
CLC1117
$18.65
Tool Bags and Cases
D
I
NC
LUDE
Mechanic’s Tool Bag
8 Pockets Inside
& 2 Outside
Available in four colors
MTB-XX*
Field Service Tech Case
One side features 39 sewn in tool
pockets and one large pouch with 3
more storage pouches. Outside has 2
pockets with hook and loop flaps.
Shoulder strap included.
$21.25
695ZT
Pallets Nylon Zipper Tool Case
The 651ZT single zipper holds
two pallets. Shoulder strap
included. Outside has 2 hook
and loop closure pockets
660ZT
$78.00
LAN Telecom Case
40 sewn in tool pockets, 4
pouches in one side, 11 sewn
in tool pockets. Outside has 2
pockets w/hook & loop flaps.
Shoulder strap included.
688ZT
$170.00
Master Technician Case
47 tool pockets, 3 meter pouches,
& shoulder strap.
Available in Black, Blue, Burgundy, Green
669ZT
$110.00
Pro Telecom Case
Holds all of the standard tools:
Screwdrivers, Marks, Probes,
Punch tools, Pliers, A level,
Strippers, Test adapters, Cable
tester, and much more!
680ZT
$148.65
Master Telecom Case
24 Sewn Interior Pockets, 5 Small
Parts Pouches, Special Pockets for
Tone Generator and Probe Set, &
Velcro Strap “Buttset” Holder
685ZT
$125.00
Telecom Case
Includes: Velcro Strap “Buttset”
Holder, 20 Sewn Tool Pockets,
& 1 Parts Pouch
630ZT
$84.95
Machine/Copy Repair Field Service
Outside has 2 pockets with hook and
loop flaps and a full-length document
pocket to provide additional storage
capacity.
641ZT
$110.00
OT
O LS N
Tuff-Tote™ Tool Carriers & Pouches
D
I
NC
LUDE
Combo Tool & Attache/Notebook
This case contains 47 tool pockets
and a meter pouch plus a padded
pocket for your computer. 2 outside
meter pouches & shoulder strap.
689ZT
$188.00
TroubleShooter Tool Case
29 sewn tool pockets, & 3
meter pouches
Available in Black, Green, Blue
& Burgundy
$128.45
TO
651ZT-2
$174.95
Ideal Tuff-Tote™ Carriers & Tool
Pouches are also offered in black
Tuff-Tote™ Ultimate Tool Carriers
2 divided inside compartments
w/6 screwdriver loops, A large
center compartment, 4 outside
pockets & 8 outside tool loops.
35-975
$215.00
Tuff-Tote™ Tool Carriers
6” x 8” Tool carrier w/4 center
screwdriver slots, 2 interior
compartments, 2 divided outside
pockets & 4 outside tool loops
35-969
$158.00
Tuff-Tote™ Tool Pouches
8-Pocket pouch features large utility
compartment with 2 dividers and 6
screwdriver loops, 7 outside pockets
release snaps and tape chain
35-950
35-975BLK
35-950BLK
$215.00
$109.89
$109.89
O LS N
Tool Bags and Cases
D
I
NC
OT
TO
$9.15
Drawstring Bucket Bag
6 Pockets Inside
& 16 Outside
O LS N
OT
TO
CLC1538
3 Multi-purpose, Clip-On Bag Combo
One 4” x 3” x 9” Bag
One 3 1/2” x 2 1/2” x 8” Bag
One 3” x 2” x 6 1/2” Bag
LUDE
20” Electrician’s Bag
Constructed of canvas, Contains
16 interior & exterior pockets
L: 20” W: 12” H: 10”
0158-11
76
$82.05
18” Multi-Pocket Bag
Constructed of nylon, 31 multi-use
reinforced pockets, inside & out.
L: 18” W: 11” H: 10”
0158-12
Datacomtools.com
TM
$41.00
11” Condura Open Tool Carrier
Constructed of double-layer of
Cordura, 37 pockets inside & out.
L: 11” W: 9” H: 10”
0158-13
$78.48
20 - Pocket Tool Caddy
Constructed of double-layer of
Cordura, 20 pocket inside & out.
L: 10” W: 7” H: 13”
0158-15
$51.25
Heavy-Duty 8-Pocket Leather Pouch
Large main pocket area for easy
storage, & 4 smaller compartments.
L: 7” W: 6” H: 10 1/2”
0258-11
$41.95
Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply
I
NC
Tool Bags and Cases
D
TO
OT
O LS N
LUDE
45” Cordless Drill Holster
Fits most 1/4” - 3/8” drills
2 Pockets hold bits, pencils, etc.
Fits belts up to 2 1/2” wide.
$18.95
902
Plier Holder
Fits narrow-type hand tools up to 10”
Fits belts up to 2 1/4” wide
$9.95
767
$5.89
Plier/Tool Holder
open-bottom design holds variety of tools
Fits belts up to 2 3/4” wide
417
Economy Plier/Tool Holder
Fits narrow-type hand tools up to 10”
Fits belts up to 2 3/4” wide
$6.50
328
$4.85
O LS N
Tool Bags and Cases
Heavy-Duty Polyethylene Cases
D
I
NC
OT
TO
DRL91
2 Pocket Tool/Plier Holder
2 Front tool snaps
Fits belts up to 2 1/4” wide
LUDE
Tool/Utility Knife Sheath
Holds knives and narrow tools
Fits belts up to 2” wide
449
$5.65
Steel Loop Hammer Holder
Cradle design eliminates pivoting
Fits belts up to 2 3/4” wide
439
16’ - 30’ Measuring Tape Holder
Molded leather retains shape
Fits belts up to 2 3/4” wide
$4.75
464
$8.95
Heavy-duty aluminum rim with
black trim & gasket, cast chrome
key locks, full-length piano hinge,
& golf grip handle. Case contains
standard pick-n-pluck cubed foam.
L: 21 1/2” W: 15 1/2” D: 9”
221609
$199.00
Heavy-duty aluminum rim with black
trim and gasket, cast chrome key
locks, full-length piano hinge, and
deluxe golf grip handle.
L: 19 5/8” x W: 13 3/4” x D: 7”
201407
$159.00
Heavy-Duty Polyethylene Cases
Heavy duty aluminum rim w/black
trim & gasket, cast chrome key
locks, full piano hinge, & golf grip
handle. Case contains pick-n-pluck
cubed foam. Includes wheels &
telescoping handle.
L: 21 1/2” x W: 15 1/2” x D: 9”
221609H
$280.00
Heavy duty aluminum rim w/black
trim & gasket, cast chrome key locks,
full piano hinge, & golf grip handle.
Includes wheels & telescoping
handle.
L: 19 5/8” x W: 13 3/4” x D: 7”
201407H
Heavy-duty aluminum rim w/black
trim & gasket, cast chrome key
locks, full-length piano hinge, &
golf grip handle. This contains our
standard pick-n-pluck cubed foam.
L: 18 1/2” x W: 12 1/2” x D: 7”
$239.00
181307
$148.00
Heavy Duty Cases
Heavy-duty aluminum rim with black
trim and gasket, cast chrome key
locks, full-length piano hinge, and
deluxe golf grip handle. Cubed foam
set included.
L: 27 1/2” x W: 19 1/2” x D: 7”
282007
$245.00
Heavy-duty aluminum rim w/black
trim & gasket, cast chrome key locks,
full-length piano hinge, & golf grip
handle. This case contains our standard pick-n-pluck cubed foam.
L: 23 3/4” x W: 17 3/4” x D: 9”
241809
$219.00
Medium Duty Cases
Heavy-Duty Polyethylene ATA Cases with Recessed Hardware. The exterior shell is
tough impact resistant HMW polyethylene. Heavy-Duty aluminum rim and gasket,
black trim, combination lock, full length piano hinge and spring loaded handle.
Modern look of heavy duty grained ABS with
extruded aluminum frame, deluxe golf grip handle,
cast chrome key locks and piano hinge. This case
has a light duty valance.
Series includes wheels and telescoping handle for convenient transportation.
Part #
201409A
221609A
201409AH
221609AH
241811AH
202014AH
282011AH
261613AH
261617AH
Inside Dimensions
Price
19 5/8”L x 13 3/4”W x 9”D
21 1/2”L x 15 1/2”W x 9”D
19 5/8”L x 13 3/4”W x 9”D
21 1/2”L x 15 1/2”W x 9”D
23 3/4”L x 17 3/4”W x 11”D
20”L x 20”W x 14”D
27 1/2”L x 19 1/2”W x 11”D
26”L x 16”W x 13”D
24”L x 24”W x 16”D
$235.00
$255.00
$330.00
$345.00
$360.00
$378.00
$385.00
$390.00
$405.00
Light-Duty ABS Series
Case contains standard pick-n-pluck cubed foam.
Part #
Inside Dimensions
Price
2005
2007
2207
2407
2807
20”L x 14”W x 5”D
20”L x 14”W x 7”D
22”L x 16”W x 7”D
24”L x 18”W x 7”D
28”L x 20”W x 7”D
$118.00
$130.00
$150.00
$170.00
$195.00
Blow-Molded Cases
Light-duty, black, scuff resistant molded ABS thermoplastic forms the tough
shell of these cases. Extruded aluminum rim, drawbolt key locks, and strong
molded handle.
* 1425 has medium-duty valance
These cases are manufactured from prime,
high-density polyethylene. The textured exteriors
resist dents, cracking and scuffs. The shells are
unaffected by extreme temperatures.
Part #
Inside Dimensions
Price
Part
Inside Dimensions
1412
1414
1416
1419
1425
1426
1705
12”L x 8”W x 5”D
12”L x 11”W x 5”D
16”L x 12”W x 5”D
18”L x 13”W x 5”D
18”L x 13”W x 7”D
16”L x 12”W x 7”D
17”L x 11”W x 5”D
$58.00
$65.00
$69.00
$75.00
$99.00
$84.00
$90.00
107
207
307
407
507
607
707
7 1/2”L x 5”W x 2 3/16”D
9 1/2”L x 6”W x 2 11/16”D
11”L x 7”W x 3 7/16”D
12 3/8”L x 8 7/8”W x 5 1/8”D
13 7/8”L x 9 7/8”W x 4”D
15 7/8”L x 10 7/8”W x 2 7/8”D
17 7/8”L x 12 3/4”W x 7 1/8”D
Major Credit Cards Accepted
1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com
Price
$14.00
$17.20
$25.00
$33.35
$40.45
$38.75
$77.50
77
Greenlee MagnumPro Fish Tape
Steel
Stainless Steel
All MagnumPRO™ Fish Tapes Feature:
- Advanced comfort grip and rugged case design
- Superior rapid grip tape payout and rewind
- Viewing ports to see amount of tape in case and allow quick debris removal.
-
Steel: Used for general fishing in conduit
Maximum durability
Improved low profile tip for easy fishing through all sizes of conduit
Available in 50’, 65’, 125’ and 240’ length
1/8”, 1/4” and flat steel profiles to accommodate different fishing situations
-
Stainless Steel: Used in general fishing in conduit & harsh environmental situations
Corrosion free stainless steel tape for maximum life
Fish further and faster with Speed Flex Leader
Available in 100’ and 200’ lengths
Replaceable Speed Flex Leader
Flexible Steel Cable: More flexible than steel, stronger than fiberglass or nylon and slips through later
and vertical bends in the same run
- Multi-strand steel cable for maximum flexibility
- Available in 50’ and 100’ lengths
Flexible Steel
-
FiberGlass: Used in proximity to energized lines and where good flexibility is desired
Non-conductive fiberglass tape with patented low-friction coating for faster and easier fishing
Perfect for fishing in conduit with wire or cable present
Available in 50’, 100’, 200’, and 250’ lengths
Replaceable tips
FTS438-65
FTS438-125
438-5H
FTSS438-100
FTSS438-200
FTFS439-50
FTFS439-100
FTF540-50
FTF540-100
FiberGlass
1/8” x 65’ - Steel Fish Tape
1/8” x 125’ - Steel Fish Tape
1/8” x 50’ - Steel Fish Tape
1/8” x 100’ - Stainless Steel Fish Tape
1/8” x 200’ - Stainless Steel Fish Tape
3/16’ x 50’ - Flexible Steel Fish Tape
3/16” x 100’ - Flexible Steel Fish Tape
11/64” x 50’ - Fiberglass Fish Tape
11/64” x 100’ - Fiberglass Fish Tape
$31.70
$57.25
$19.85
$65.31
$85.25
$91.65
$147.15
$135.40
$183.95
Zoom Fish Tapes
-
Translucent, impact-resistant case shows precisely how much tape is left.
Large Tuff-Grip™ handle provides secure grip, accommodates large gloved hands.
Zoom™ Tape’s tough outer nylon jacket offers abrasion resistance, with enhanced lubricity resin additives.
Zoom™ Tape’s 3/32” round, 19 strand preformed core handles tight bends and tough pulls by providing
omni-directional (all directions) flexibility to change planes in conduit runs.
- 304 Grade Stainless Steel (Cutlery Grade) assures long, rust-free performance.
- Can be used in aqueous pulling lubricants and wet conduit runs without concern about rusting.
3/16” x 50’ Zoom Fish Tape
3/16” x 100’ Zoom Fish Tape
3/16” x 200’ Zoom Fish Tape
31-090
31-092
31-096
Spiral Wrap
- Harness cables into a single
manageable bundle.
- Allows breakouts of cables.
- Provides protection
- Easy identification of cable
- Installation tool supplied.
- Bundle Range: 0.38” - 4.00”
- 100’ reel for easy handling
78
T50F-C
T50F-C0
T50F-C1
T50F-C2
T50F-C3
T50F-C4
T50F-C5
T50F-C6
T50F-C7
T50F-C8
T50F-C10
T50F-C16
T50FR-C
T50FR-C20
Natural Polyethylene
Black Polyethylene*
Brown Polyethylene
Red
Polyethylene
Orange Polyethylene
Yellow Polyethylene
Green Polyethylene
Blue
Polyethylene
Purple Polyethylene
Gray
Polyethylene
White
Polyethylene
Pink
Polyethylene
Natural Polyethylene**
Black Polyethylene**
1 roll
1 roll
1 roll
1 roll
1 roll
1 roll
1 roll
1 roll
1 roll
1 roll
1 roll
1 roll
1 roll
1 roll
$135.00
$169.00
$155.00
$155.00
$155.00
$155.00
$155.00
$155.00
$155.00
$155.00
$155.00
$155.00
$225.00
$255.00
*Weather Resistant
**Flame Retardant
Flame retardant products are UL94V-O rated
Datacomtools.com
TM
$90.90
$114.95
$192.00
Loom Tubing
Solid Wall
CLTS25F-C3
CLTS38F-C3
CLTS50F-C3
CLTS75F-C3
CLTS100F-C3
CLTS125F-L3
CLTS150F-D3
CLTS25F-C
CLTS38F-C
CLTS75F-C
CLTS100F-C
CLTS125F-L
0.28”
0.42”
0.51”
0.76”
0.92”
1.29”
1.48”
0.28”
0.42”
0.76”
0.92”
1.29”
0.39”
0.56”
0.67”
0.94”
1.09”
1.50”
1.73”
0.39”
0.56”
0.94”
1.09”
1.50”
100’
100’
100’
100’
100’
50’
500’
100’
100’
100’
100’
50’
1 roll $38.00
1 roll $45.00
1 roll $48.00
1 roll $68.00
1 roll $88.50
1 roll $55.00
1 roll $460.00
1 roll $33.10
1 roll $39.10
1 roll $59.60
1 roll $76.90
1 roll $47.45
Slit Wall
CLT25F-C3
CLT38F-C3
CLT50F-C3
CLT75F-C3
CLT100F-C3
CLT125F-L3
CLT150F-X3
CLT188F-X3
CLT25F-C20
CLT38F-C20
CLT50F-C20
CLT75F-C20
CLT100F-C20
CLT125F-L20
CLT150F-T20
CLT150F-X20
CLT188F-X20
CLT150F-X4
CLT188F-X4
0.27”
0.41”
0.51”
0.76”
0.92”
1.29”
1.55”
1.88”
0.27”
0.41”
0.51”
0.76”
0.92”
1.29”
1.55”
1.55”
1.88”
1.55”
1.88”
0.39”
0.56”
0.67”
0.94”
1.09”
1.50”
1.86”
2.17”
0.39”
0.56”
0.67”
0.94”
1.09”
1.50”
1.86”
1.86”
2.17”
1.86”
2.17”
100’
100’
100’
100’
100’
50’
10’
10’
100’
100’
100’
100’
100’
50’
200’
10’
10’
10’
10’
1 roll $38.00
1 roll $45.00
1 roll $48.00
1 roll $68.00
1 roll $000.00
1 roll $55.20
1 roll $29.25
1 roll $37.70
1 roll $33.10
1 roll $39.10
1 roll $41.45
1 roll $59.60
1 roll $76.90
1 roll $47.45
1 roll $210.00
1 roll $25.45
1 roll $32.75
1 roll $25.25
1 roll $37.70
Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply
Creep-Zit
81-000: Creep-Zit™ Pro 36ft. Kit - Threaded Connector Wire Running Rod Kit Includes:
- Five FiberFuse™ 6ft. push/pull rods with male and female threaded connector ends
- One Luminous FiberFuse™ 6ft. push/pull rod with male and female threaded connector ends
- One 6ft. Fish Tailz™ 1/8” Mesh Pull Sock
- Whisk Threaded Tip
- Ball Chain Threaded Connector Tip (12” ball chain length)
- Female Bull Nose Threaded Connector Tip
- Kit is packaged in a clear square plastic tube
81-130: Creep-Zit™ 30ft. Kit - Threaded Connector Wire Running Rod Kit Includes:
- Four FiberFuse™ 6ft. push/pull rods with male and female threaded connector ends
- One FiberFuse 6ft. push/pull rod with a fixed bull nose end and a female threaded connector end
- Whisk Threaded Connector Tip
- Ball Chain Lanyard (12” length)
- Kit is packaged in a clear square plastic tube
Creep-Zit™ 36” Kit
81-230: Creep-Zit™ 30ft. Luminous Kit - Threaded Connector Wire Running Rod Kit Includes:
- Four Luminous FiberFuse™ 6ft. push/pull rods with male and female threaded connector ends
- One Luminous FiberFuse 6ft. push/pull rod w/a fixed bull nose end & female threaded connector end
- Whisk Threaded Connector Tip
- Ball Chain Lanyard (12” length)
- Kit is packaged in a clear square plastic tube
81-000
81-130
81-230
Creep-Zit™ Pro 36ft. Kit - Threaded Connector Wire Running Rod Kit
Creep-Zit™ 30ft. Kit - Threaded Connector Wire Running Rod Kit
Creep-Zit™ 30ft. Luminous Kit - Threaded Connector Wire Running Rod Kit
$83.95
$74.95
$92.40
Creep-Zit™ 30ft Kit
Fishing Poles / Stix
-
Fish Poles Features:
Designed specifically for pushing and pulling wires over long distances.
Push or pull wires over suspended ceilings, under sub-floors or crawl spaces and in attics.
Non-conductive, high-impact construction.
Specialized hook can be used to install wires in suspended ceilings.
Velcro strap secures pole when in collapsed position.
Self-contained, no loose parts.
Lightweight design to minimize fatigue.
-
Fish Stix Features:
1/4” (6.4 mm) diameter fiberglass rods provide added rigidity when multiple sections are connected.
200 lbs. (0.9 kN) minimum pulling strength.
Two different threaded tips accommodate various bundles of wire or cable.
540-24 includes one 3’ Glo Stix™ section for improved tip visibility.
540-12 includes (3) 4’ fish stix sections
540-24 includes (3) 6’ fish stix sections and (1) 3’ fish stix section
Fish Poles
Glo-Stix Features:
- Luminescent fiberglass rods glow in the dark to make fishing voice, data and video wires easier in dark
spaces, such as above ceilings, in walls, and below sub-floors.
- More flexible for fishing in walls through outlet box holes.
- Sturdy, steel-threaded connectors are interchangeable with Green- lee - 1/4” Fish Stix.
-Clear, non-metallic storage tube keeps Glo Stix charged.
- 200 lbs. maximum pulling strength.
- 540-6: Kit includes a bullet nose and “J” hook threaded tips, packaged in a plastic tube
- 540-15: Kit with fixed bullet nose on both ends
02268/FP12
10442/FP18
10443/FP24
540-12
540-24
540-6
540-15
Fish Pole 12’
Fish Pole 18’
Fish Pole 24’
12’ Greenlee Fish Stix
24’ Greenlee Fish Stix
Glo Stix 6’ (4.0 mm x 1.8 m)
Glo Stix 15’ (4.7 mm x 4.6 m)
Major Credit Cards Accepted
$50.69
$77.65
$131.50
$43.05
$75.93
$6.80
$48.55
Fish Stix
Glo Stix
1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com
79
EZ-RJ45 Connectors
Slide wires thru the EZRJ45 Connector
Arrange wires in the
proper order
Twist the wires and slide
the connector into the
cable jacket for a tight fit.
Crimp & Finished!!
1) Save the cable jacket and separate the four cable wires
2) Slide the cable jacket between the twisted pairs
3) Untwist the wire by pushing the wire in the opposite
direction of the twist.
4) When you reach the end, pinch the wire inside and pull
outward to straighten.
The EZ-RJ45 Connectors, simplify twisted pair
terminations by allowing the wire to be inserted through
the connector and out the front. This allows the technician
to easily verify the proper wiring order. Electrical performance of the termination is optimized by pulling the connector down over the cable jacket and seating it tightly in
the rear of the connector. It also guarantees that the wires
will be properly flush to the front of the connector.
202003J
202035J
202010J
202036J
EZ-RJ45® Connectors, 100 Pc. Jar
Strain Relief for EZ-RJ45® Cat 5e Connector. Jar of 100
EZ-RJ45® Cat 6+ Connectors, 100 Pc. Jar
Strain Relief EZ-RJ45® Cat 6+ Connectors & Shielded Cat 5e Connector, Jar of 100
$62.00
$24.00
$70.00
$24.00
TeleMaster™ Crimp Tool Kit
- Tool for RJ-11(1,2,3 pair) & RJ-45 (4 pair) plugs
- 10 x 4-Position, RJ-11 Stranded Modular Plugs
- 10 x 6-Position, RJ-11 Stranded Modular Plugs
- 10 x 8-Position, RJ-45 Stranded Modular Plugs
33-700 TeleMaster™ Crimp Tool Kit $54.45
15015
Crimp Tool for EZ-RJ
- Tool steel die head assembly
provides 360° of connector
support during crimp.
$11.95
100054C
$86.95
All-in-One Ultra Telephone Tool
Our best all-in-one tool! Professional crimping
tool for either AMP/Tyco or Western Electric/
Stewart Stamping, type, 4-, 6-, & 8-position
modular plugs.
All-in-one crimping tool for Western
Electric (WE)/Stewart Stamping
(SS)-type, 6- and 8- position modular
telephone plugs. Cuts and strips.
Ratchet-controlled to master the
tension of the tool for ease of use.
Ratchet Telemaster
- Ratchet version of popular IDEAL Telemaster™ Tool.
for RJ-45 and RJ-11 modular plugs.
- Multi-function telephone tool cuts, strips, & crimps.
- Repeatable crimp action for high quality connections
- Embedded flat cable cutter and stripper.
- Crimps 8- position RJ45 connectors and 4- and 6- position RJ11 and
RJ12 connectors.
- Crimps AWG 28-24 telephone and data cables.
30-696 Ratchet Telemaster
11212-530
$61.85
All-in-One Telephone & Phone and Data Tools
Modular Crimp Tool
$47.00
Modular Crimp Tool
All-in-One Phone and Data Tool
The tool crimps modular plugs for data & voice
including handset plugs. Available for Western Electric/Stewart-Stamping or AMP -style connectors.
- Embedded cable cutter/stripper.
- Crimps 28-24 AWG telephone/data.
- Crimping cavities for RJ45, RJ11/RJ12 & RJ22
handset modular plugs
- Cuts and strips round UTP/STP phone and data
cable along with flat satin phone cable
901014 All-in-One Phone Tool AMP $130.00
901016 All-in-One Phone Tool WE/SS $130.00
1556 All-in-One Phone and Data Tool
$38.75
1557 All-in-One Phone and Data Tool AMP $38.75
Twisted Pair Hand Tools
This 3-in-1 ratchet-style crimp tool
cuts, strips, and crimps modular
plugs on either round or flat cables.
(Flat silver-satin cable is not
recommended for patch cords used
to transmit data, yet most tools
only offer a flat cable stripper.) The
parallel action design maintains accurate alignment of the die with
the plug for a precision crimp every time.
PT908
Modular Crimp Tool
$155.00
Telephone Ratchet Crimper
Pro-Crimper II Hand Tool
Category 6 Modular plug die set and tool crimps
both the strain relief and the modular plug
contacts at the same time.
- External strain relief clamp die set & tool are for
use /8-position category 3, 5, & 5e plugs only.
80
Wire Stripper
- Designed for stripping the jacket
on Cat 5, 5e cables.
- Will not nick inner conduct.
Modular Crimp Tool
Twisted Pair Crimp Tools
790163-1 Pro-Crimper II Hand Tool
How Straighten Twisted Pair Wire
$315.00
Datacomtools.com
TM
Typically used for Modular Plug
Connectors. Our Telephone Ratchet
Crimper was designed with a compact head to fit into tight spaces
and ergonomic handles for operator
comfort.
Portable Butterfly Hand Tool
Butterfly tool for Champ 25 Pair Connectors
- Terminates & shears all wires in a single operation.
- Wires can be laced in tool or lacing fixture.
- Base plate can be bench mounted.
229378-1 Butterfly Hand Tool
230328-3 Optional lacing fixture
$1745.00
$137.35
- Combination tool terminates 8, 6, & 4-position modular style plugs.
- No need to change crimping dies.
- Full-cycle ratchet provides quality terminations every cycle.
- Straight action ensures uniform crimp.
- Built-in wire cutter and stripper for flat cable.
- All-steel frame has rust-resistant, black oxide finish.
45575
Telephone Ratchet Crimper
$71.65
Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply
Pro Installer’s Modular Plug Tool
Part Number
1-231666-4
1-231666-3
1-231666-2
1-231666-1
1-231666-0
Network Tool Bundle
High
8-Position 6-Position
4- & 64-Position
Price
Performance 8- Line Die Body Die
Position
Handset
Position Die Set
Set
Set
Line Die Set Die Set
•
•
•
•
•
$378.00
•
•
•
•
$360.00
•
•
•
•
$315.00
•
•
•
$315.00
•
•
•
$265.00
Modular Plugs sold in boxes. Each box contains 100 Plugs
5-554720-3
RJ45 8 Conductor 26-24 AWG Solid Cable
5-554739-3
RJ45 8 Conductor 26-24 AWG Stranded Cable
5-555042-3
RJ11 6 Conductor 26-24 AWG Solid Cable
5-641337-3
RJ11 6 Conductor 26-24 AWG Stranded Cable
Category 6 Modular Plug (100 Per box)
5-1375204-3
Unshielded stranded 24-26AWG
5-1375202-3
Unshielded solid 23-24AWG
- Data SureStrip™ Cat5e, Cat6, Phone
Cutter/Stripper
- All-in-One Data & Phone Tool (WE/SS-style)
- 110 Non-Impact Punchdown Tool
- RJ45 WE/SS 8P8C Modular Plugs (Cat5e,
Cat5) - 10 pack
Connector style:
- WE/SS-style modular plugs
$38.00
$35.00
$20.00
$21.50
$65.00
$72.75
4909
Network Tool Bundle
$56.75
Indent D-Sub Crimper
Twisted Pair Bundles
Crimp Bundle Kit
Complete tool bundle
along with modular plugs
to make RJ45 or RJ11
patch cords.
- Universal Cable Stripper
- Modular Plug Crimper for
RJ45 & RJ11/12
- 10, RJ45 Cat5e plugs for solid, round cable
- 10, RJ11 phone plugs for solid, round cable
- Universal Cable Stripper
- Modular Plug Crimper for
RJ45 & RJ11/12
- 110 Punchdown Tool
- 10, RJ45 Cat5e data plugs for solid, round cable
- 10, RJ11 phone plugs for solid,
70009 Crimp Bundle Kit
70016
$29.45
Indent D-Sub Crimper
Crimping tool for 4-indent crimping of
closed-barrel D-sub contacts.
Networking Tool Bundle
Complete tool bundle for
making patch cords or terminating 110 jacks & panels.
Networking Tool Bundle
- Comfortable handles for low-effort operation
- Adjustable pin height locator
1460
4-Indent D-Sub Crimper (26-20 AWG)
$31.99
$32.50
Terminal Crimpers
HTN 21L Terminal Crimper
1600 Series Crimper
Insulated Terminals
Crimps 22-14 AWG (.34-2.5
mm²) insulated terminals
and lugs. Fixed die system.
- Fixed steel die system.
- Built-in terminal locator.
- Durable steel construction
for long life.
- Handles designed for loweffort operation.
Crimp size: 16-14(Blue)/22-18(Red)
Connector style: Terminal-Elliptical 2-level standard commercial terminals
Connector type: Insulated & non-insulated
terminals & lugs
Crimp Size: 20-18/16-14/12-10
Connector Type: Non-insulated terminal lugs, cable
lugs, parallel and serial splices
1605 1600 Series Crimper
901461 HTN 21L Terminal Crimper
$116.59
$143.15
1600 Series Wire Ferrule Crimper
Professional-quality crimping tool for insulated and non-insulated wire ferrules.
- Ferrules’ crimp conforms to DIN 46228 Pt. 1 and 4.
Type: 20-10 AWG (.5-6 mm²) stranded wire
Crimp Size: 20-10 Trapezoid
Connector Style: DIN or US type wire ferrules
Connector Type: Insulated & non-insulated wire ferrules
1647
1600 Series Professional Wire Ferrule Crimper
$134.40
CTN 25 D5 Terminal Crimper
Crimping tool for non-insulated terminal
lugs w/a wire range of 8-4 AWG.
CTI 6 Terminal Crimper
1600 Series Crimper Non-Insulated Terminals
Type: AWG 20-10 (0.1-6.0 mm²)
Crimp Size: 20-16(R)/16-14(B)/12-10(Y)
Connector Type: Insulated terminal lugs, cable
lugs & serial splices.
Type: 20-10 AWG (.5-6.0 mm²)
Crimp size: 12-10/16-14/20-18 Terminal, indent
Connector style: Standard commercial non-insulated terminals & lugs.
900612 CTI 6 Terminal Crimper
1618 1600 Series Crimper Non-Insulated $170.79
$161.95
Scotchlok Terminal Box
Terminal Crimp Kit
The STK-1 is constructed of durable metal
with individual product
compartments. While
the compartments
keep you organized, the
metal frame protects
the contents.
Scotchlok Terminal Box
$179.99
900623
500-037
Terminal Crimp Kit
Major Credit Cards Accepted
- Fixed die system
- Crimps rolled and brazed lugs (900622)
- Crimps pin-type lugs (900622)
- Crimps parallel and serial splices (900622)
- Crimps tube lugs and splices (900623)
- Conforms to DIN
CTN 25 D5 Terminal Crimper
$595.00
Terminal Crimper Kit
- Ratcheted crimper
- Ring insulated terminal
22-16 AWG x 50 pcs
- Ring insulated terminal
16-14 AWG x 40 pcs
- Ring insulated terminal
12-10 AWG x 20 pcs
Economical terminal crimper kit for electrical
and control panel installation and wiring.
- 1300 Series Insulated Terminal Crimper
- Assorted AWG 22-12 Insulated Terminals
- Crimp Tool Features Interchangeable Die System
- One-year warranty on kit
- Individual Warranties Apply to Each Tool
- 3M™ Scotchlok™ Crimping Tool TH-440
- Butt splice insulated 22-16 AWG x 30 pcs
- 3M™ ScotchCode™ Tape Dispenser STD-0-9
- Butt splice insulated 16-14 AWG x 20 pcs
- 100 x 3M™ Cable Ties 06225
- Butt splice insulated 12-10 x 15 pcs
- 100 x 3M™ Cable Ties 06226
- 50 x 3M™ Highland™ Ring Tongue Terminal RV18-6*
- Plus more. Go to datacomtools.com for full listing
STK-1
Connector type: Noninsulated terminal lugs
(900622), Tube lugs
and splices (900623)
$33.85
4305
Terminal Crimper Kit
1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com
$73.85
81
CrimpALL Broadcast Pack
SealTite® Pro for the Smart Home A/V Kit
- CrimpALL/8000
Crimper Frame Only
- RG6, RG6 Quad Die,
CrimpALL/8000 &
1300 Series
- HDTV Die CrimpALL/8000 & 1300 Series
- HDTV Die for CrimpALL/8000 & 1300 Series
- SMA, BNC/TNC Die for CrimpALL/8000 & 1300
- RG8/11/213-CrimpALL/8000 & 1300 Series
4802
CrimpALL Broadcast Pack
$138.00
SealTite™ Waterproof Connector Kit
Kit Contains:
- SmartHome Data SureStrip® 1119
- SealTite® Pro Compression Crimper,
RCA, BNC, Cable TV F (RG59/6/6
Quad) 1555
- 6 RG6/6 Quad connectors (2): RCA,
BNC, CATV “F”
- 2 sets of color bands (for
use on BNC & RCA)
4915
This kit is designed for applications requiring
weatherproof CATV “F” connections including
satellite dish and CATV installations. The
crimper works with Paladin’s connectors as
well as Augat/T&B Snap-n-Seal™.
- KT 8 Cutter
- LC CST CATV
- SealTite™ 59/6 CATV “F”
- Cable TC “F” flaring & attachment tool
SealTite® Pro Kit
$98.60
4906
SealTite™ Waterproof Connector Kit
$80.95
Crimpers and Die Sets
1300 Series Crimp Frame Only
Paladin’s 1300 Series is the original interchangeable-die
crimping system - all the rest are mere copies of its innovation.
It continues to be the answer for precision-crimping at an affordable price with over 50 die sets available for the most popular
connectors. See the chart for specific crimp dimensions.
1302
1300 Series Crimp Frame Only
1300 Series Die Sets
Part #
Description
Tool & Die: 1307
RJ-45 - 8P8C (8 Pin)
Die only: 2061
Tool & Die: 1340 RJ11 & RJ12 - 6P6C,
6P4C, 6P2C
Die only: 2062
Tool & Die: 1341 RJ22, Handset 4P4C
Die only: 2063
(4 Pin)
Tool & Die: 1342
RJ45 - 8P8C (8 Pin)
Die only: 2064
Tool & Die: 1343 RJ11 & RJ12 - 6P6C,
Die only: 2065
6P4C, 6P2C
Tool & Die: 1344 RJ11 DEC-MMJ OFFSET
(6P6C)
Die only: 2067
Tool & Die: 1345 RJ50-10P10C (10 Pin)
Die only: 2068
Tool & Die: 1361 British Telecom 6 Pole
Die only: 2032
Plug
Tool & Die: 1370 SHIELDED RJ45, Stewart
Die only: 2670
Connector, Short Body
Tool & Die: 1371 SHIELDED RJ45, Hirose
Die only: 2671
Connectors, Long Body
Tool & Die: 1372 SHIELDED RJ45, Hirose
Die only: 2672
Connectors, Short Body
Tool & Die: 1373 SHIELDED RJ45, Molex
Die only: 2673
Connectors
Tool & Die: 1374 SHIELDED RJ45, AMP/
Die only: 2674
Molex Connectors
Tool & Die: 1387 RJ45 WE/SS & RG6/
Die only: 2687
RG6 Quad CATV “F”
$42.99
Crimp Style
Flat/Round, Solid/Stranded/
RJ45 Unkeyed WE & SS
Flat/Round, Solid/Stranded/
RJ11/RJ12 Unkeyed WE & SS
Flat/Round, Solid/Stranded/4
Pin Handset WE and SS
Flat/Round, Solid/Stranded/4
Pin Handset WE and SS
Flat/Round, Solid/Stranded/
RJ11/RJ12 Unkeyed AMP
Flat/Round, Solid/Stranded/
RJ11 DEC-MMJ OFFSET
Flat/Round, Solid/Stranded/
RJ50 Unkeyed WE and SS
Flat/Round, Solid/Stranded/
BT 6 Pole
Round, Shielded, RJ45 STP
Stewart Connector, Short Body
Round, Shielded, RJ45 STP
Hirose Connectors, Long Body
Round, Shielded, RJ45 STP
Hirose Connectors, Short Body
5.0mm Dia. Round, Shielded
RJ45 STP Molex Connectors
6.0mm Dia. Round, Shielded
(STP), RJ45 STP AMP & Molex
UTP 4-pair & RG6/RG6 Quad
RJ45 WE/SS 8-pin & .360”
HEX/.324” HEX
Manufactures
Western Electric
Stewart Connector
Western Electric/
Stewart Connector
Western Electric/
Stewart Connector
AMP (Tyco) Inc.
Connectors only
AMP (Tyco) Inc.
Connectors only
AMP (Tyco) Inc.
Connectors only
Virginia Plastics
Price
$58.99
$25.99
$58.99
$25.99
$58.99
$25.99
$58.99
$25.99
$58.99
$25.99
$58.99
$25.99
$58.99
$25.99
British Telecom $58.99
$25.99
Plugs only
Stewart Connector $58.99
$25.99
Hirose
$58.99
$25.99
Hirose
$58.99
$25.99
Molex
$58.99
$25.99
AMP (Tyco) Inc. & $58.99
$25.99
Molex
Standard RJ45
$60.99
WE/SS Mod. Plugs $31.99
& RG6/RG6 QS
Hex-Crimp CATV F
8000 CrimpALL® Tool Frame
The 8000 Series CrimpALL® was designed
with user satisfaction in mind. This tool is
designed for superior comfort and ease of
use. It uses the same die sets as our 1300
Series crimpers.
8000
8000 CrimpAll® Tool Frame
8000 Series Die Sets
Part #
Description
Tool & Die: 8030
RJ45 - 8P8C (8 Pin)
Die only: 2061
Tool & Die: 8031
RJ & RJ12 - 6P6C,
6P4C, 6P2C
Die only: 2062
Tool & Die: 8032 RJ22, Handset 4P4C
Die only: 2063
(4 Pin)
Tool & Die: 8033
RJ45 - 8P8C (8 Pin)
Die only: 2064
Tool & Die: 8034 RJ11 & RJ12 - 6P6C,
Die only: 2065
6P4C, 6P2C
Tool & Die: 8035 RJ11 DEC-MMJ OFFSET
(6P6C)
Die only: 2067
Tool & Die: 8036 RJ50 - 10P10C (10 Pin)
Die only: 2068
Tool & Die: 8038 British Telecom 6 Pole
Die only: 2032
Plug
Tool & Die: 8040 Shielded RJ45, Stewart
Die only: 2670
Connector, Short Body
Tool & Die: 8041 Shielded RJ45, Hirose
Die only: 2671
Connectors. Long Body
Tool & Die: 8042 Shielded RJ45, Hirose
Die only: 2672
Connectors, Short Body
Tool & Die: 8043 Shielded RJ45, Molex
Die only: 2673 Connectors, 5 dia. cable
Crimp Style
Flat/Round, Solid/Stranded/
RJ45 Unkeyed WE and SS
Flat/Round, Solid/Stranded/
RJ11/RJ12 Unkeyed WE & SS
Flat/Round, Solid/Stranded/
4 Pin Handset WE & SS
Flat/Round, Solid/Stranded/
RJ45 Unkeyed AMP
Flat/Round, Solid/Stranded/
RJ11/RJ12 Unkeyed AMP
Flat/Round, Solid/Stranded/
RJ11 DEC-MMJ OFFSET
Flat/Round, Solid/Stranded/
RJ50 Unkeyed WE and SS
Flat/Round, Solid/Stranded/
BT 6 Pole
Round, Shielded, RJ45 STP
Stewart Connector, Short Body
Round, Shielded, RJ45 STP
Hirose Connectors, Long Body
Round, Shielded, RJ45 STP
Hirose Connectors, Short Body
5.0mm dia. Round, Shielded,
RJ45 STP Molex connectors,
5.0mm dia cable
Tool & Die: 8044
SHIELDED RJ45,
6.0mm dia. Round, Shielded,
Die only: 2674
AMP/Molex Connectors,
RJ45 STP AMP & Molex,
6 dia cable
6.0mm dia cable
Tool & Die: 8045 RJ45 WE/SS & RG6/ UTP 4-pair & RG6/RG6 Quad
Die only: 2687
RG6 Quad CATV “F”
Coax RJ45 WE/SS 8-pin &
.360” HEX/.324” HEX
$58.99
Manufactures
Western Electric
Stewart Connector
Western Electric
Stewart Connector
Western Electric
Stewart Connector
AMP (Tyco) Inc.
Connectors only
AMP (Tyco) Inc.
Connectors only
AMP (Tyco) Inc.
Connectors only
Virginia Plastics
Price
$75.99
$25.99
$75.99
$25.99
$75.99
$25.99
$75.99
$25.99
$75.99
$25.99
$75.99
$25.99
$75.99
$25.99
British Telecom $75.99
$25.99
Plugs only
Stewart Connector $75.99
$25.99
Hirose
$75.99
$25.99
Hirose
$75.99
$25.99
Molex
$75.99
$25.99
AMP (Tyco) Inc. & $75.99
$25.99
Molex
For Standard
$75.99
$31.99
RJ45 WE/SS
Modular Plugs &
RG6/RG6 QS HEXcrimp CATV “F”
Crimpers and Die Sets
Crimpmaster Crimp Tool Frame
High quality ratchet-type crimp tool
for electricians, contractors and
installers who require guaranteed
repeatability of good mechanical
and electrical connections.
1600 Series Crimp Frame Only
The 1600 Series is Paladin Tools’ premium crimper family
designed for the professional that demands superior quality and
reliability. It is the most widely used tool amongst broadcast installers and professional cable assembly companies. It supports
more fiber applications than the larger, more expensive tools.
1600
1600 Series Crimp Frame Only
$66.59
1600 Series Die Sets
Part #
Description
Coaxial
Tool & Die: 1617 BNC/TNC - RG58/59/
62AU, Belden 8281
Die only: 2005
Tool & Die: 1609 BNC/TNC - Belden 8281
& 7505
Die only: 2660
Tool & Die: 1669 BNC/TNC - Belden 1855,
Die only: 2683
1505, & 1694
Fiber
Tool & Die: 1614 SMA, SMB, FC Biconic,
SC, ST
Die only: 2664
Tool & Die: 1668
SC & ST
Die only: 2668
82
Datacomtools.com
Crimp Style
Comments
Price
.256/.213/.068” HEX
6.5/5.4/1.7mm
.324/.068” HEX & .42” SQ:
8.2/1.7mm HEX & 1.0mm SQ
.278/.255/.178/.041” HEX
Common 2- & 3 Piece
BNCs
Kings, ADC, Switchcraft,
Amphenol HDTV
Universal die for all HDTV
$110.59
$45.99
$110.59
$45.99
$110.59
$45.99
-
$96.65
$45.99
$96.65
$45.99
.213/.178/ .151” HEX
5.41/4.52/ 3.83 mm
.120/.137/.190” RND
3.05/3.48/4.83mm
TM
3M, Suncall, Fiber Source
30-506
CrimpMaster™ Crimp Tool Frame
Die Sets for the Crimpmaster™ Crimp Tool Frame
30-560 RJ-45 AMP, for Crimpmaster™
30-556 RJ-11, for Crimpmaster™
30-594 Insulated Slide-On Connectors, for Crimpmaster™
30-586 Commercial Open Barrel, for Crimpmaster™
30-573 Cambridge Type RG-59, for Crimpmaster™
30-577 RG-8, N-Series/BNC, for Crimpmaster™
30-578 RG-59, RG-6, 8281/Quad, for Crimpmaster™
30-587 RG-58, RG-174, RG-8218, for Crimpmaster™
30-576 RG-174, Mini-59 BNC/TNC, for Crimpmaster™
30-591 Plenum/Non-Plenum, RG-58 & RG-59, for Crimpmaster™
30-572 Mini Insulated Ring, Spade & Butt Splices, for Crimpmaster™
30-579 Insulated Terminals, for Crimpmaster™
30-580 Non-Insulated Terminals, for Crimpmaster™
30-581 Combo RG-58, RG-59/62, BNC/TNC, for Crimpmaster™
30-582 F-Type CATV, RG-59, RG-6, for Crimpmaster™
$52.95
$52.35
$52.35
$32.40
$32.40
$32.40
$32.40
$32.40
$32.40
$32.40
$32.40
$37.40
$32.40
$32.40
$32.40
$32.40
Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply
F-Connectors
BNC & RCA Connectors
- Approved for use by most cable TV & satellite companies.
- RF signal contains strong signal.
- Connections do not come loose.
- Provides superior durability in all climates compared to other
manufactures’ connectors.
89-211
92-610
92-650
92-656
92-660
RG-11, Dual Shield, Compression Connectors, 10 Pack
RG-59 Compression F-Connectors - Jar of 50
RG-6 Compression F-Connectors - Jar of 50
RG-6 Compression F-Connectors - Jar of 100
RG-6 Plenum Compression F-Connectors - Jar of 50
$47.25
$31.50
$30.90
$56.00
$45.25
Waterproof CATV “F” compression connectors for digital cable,
satellite, and cable modems. Works with HDTV!
- Quick & Easy assembly
- Compression-type for indoor or outdoors
- Works with HDTV & digital cable
- For satellite, CATV, cable modems, video, & UHF
9645
9646
9647
Sealtite F Connectors RG59 - Jar of 50
Sealtite F Connectors RG6 - Jar of 50
Sealtite F Connectors RG6 Quad - Jar of 50
$29.99
$29.99
$29.99
Compression Kits
BNC
RCA
- Constructed of nickel plated brass & gold plated head.
- Easily installs onto RG6 & RG59 cable.
- HDPE adapter sleeve & inner “O” ring provide double protection.
- Compatible with 30-603 & 30-793 OmniSeal Compression tools.
89-047
89-5047
89-048
89-5048
89-572
89-570
89-582
89-580
BNC RG-59 Compression Connectors - 15 pack
BNC RG-59 Compression Connectors - Jar of 35
BNC RG-6 Compression Connectors - 15 pack
BNC RG-6 Compression Connectors - Jar of 35
RG59 RCA Compression Connectors - Pack of 10
RG59 RCA Compression Connectors - Jar of 35
RG6 RCA Compression Connectors - Pack of 10
RG6 RCA Compression Connectors - Jar of 35
$30.45
$65.25
$30.45
$65.25
$20.05
$61.25
$20.05
$61.25
Compression Tools
SealTite Pro Kit
Includes all the tools you
need to prepare the cable and
terminate any compression
connector using RG59, RG6
or RG6 Quad shield cables.
- KT 8 Cutter
- LC CST CATV Stripper
- RG6 CATV Flaring Tool
- SealTite Pro Crimper
- SealTite RG6/Quad (10) Connectors
Compression Tool, F-Connector
- Compresses Series 6 & 59 coax compression
connectors.
- Connection never comes loose.
- Adjustable nesting fixture accommodates a variety
of connectors.
30-633
4910
Paladin Tool SealTite Pro Kit
Basic Compression Kit
- Economy Compression Tool
- Data T-Cutter
- Coax Stripper
- RG59 connectors: 10
$103.10
- RG6 Quad connectors: 10
- RG6 connectors: 10
33-620 Basic Compression Kit
Service Compression Kit
- RG6 universal connectors: 50
- RG6 universal plenum connectors: 10
- RG59 BNC connectors: 10
- RG6 BNC connectors: 10
$85.00
- OmniSeal Compression tool
- Port Seal
- Data T-Cutter
- RG6 Stripmaster
- RG6 Quad blade
33-630 Service Compression Kit
$318.00
Coax Flaring Tools
$24.05
OmniSeal™ Pro Compression Tool
- Connects RG6, RG Quad Shield, RG59, (33-793
also works on BNC) & compression F-Type
coaxial cables.
- Fast & reliable solution to home theatre, CATV,
satellite & security applications.
- Works with most compression connectors.
30-603
30-793
$65.40
$79.99
SealTite Pro Crimper
Crimps linear “F”, BNC, RCA, & compression
connectors for RG59, RG62AU, RG6 & Quad cables.
1555
$58.95
BNC/F-Connector Tool
- Flare the shield braid back from the dielectric without nicking your finger.
- Attachment tool enables you to hold the connector comfortably to insert
onto cable.
- One year warranty.
1927
Cable TV “F” Flaring & Attachment Tool
$8.75
RG59/RG6/RG6 Quad Flaring Tool
Major Credit Cards Accepted
1908
1907
1916
CATV “F” Extraction Tool 8”
BNC Extraction Tool 8”
BNC Extraction Tool 12”
$13.99
$13.99
$13.99
- Combines a 7/16 in. hex Socket & 3/8-32
threaded end.
- Holds F-connector during insertion to ease
seating against dielectric.
- Works on RG59 and RG6/6 Quad Cable.
- Flares shield away from center dielectric.
- Saves time on CATV and satellite installations.
- One year warranty.
1917
- Comfortable driver-style plastic handle.
- One-year warranty.
- 1908 - Use the hex socket to easily remove &
insert connectors.
$24.15
35-046
F-Connector Tool
1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com
$24.95
83
Wire Strippers
45-315
45-715, 45-716
Super T-5 Wire Stripper
- Wire Range #8 to #16 AWG
- All of the T®-Stripper Features
Plus: 6-32 and 8-32 Self
Chasing Screw-Cutting Holes
- Curved, cushion-grip handles
for ergonomic comfort.
- Locking latch to keep
stripper in closed position.
45-315
45-715
45-716
45-718
45-915
45-918
45-718
- 10-18 AWG Solid (45-715)
- 16-26 AWG Stranded
(45-716)
- Pocket-Locket locks tighter
when tool is slipped into
holster for added safety.
- Narrow plier nose is
perfect for holding and
twisting wires
Kinetic Super Stripper
- Thumb guide promotes
comfort while focusing
kinetic energy for faster
wire stripping.
- Pocket-Locket™ locks
when tool is slipped into
holster or pant pocket.
45-915, 45-918
Kinetic™ Reflex™ Super
T®-Stripper
- Non-slip Santoprene™
textured grips.
- New ergonomic design for
maximum control.
- Strips 10-18 solid and
12-20 stranded.
- Shear-Cut™ bolt cutters.
Super T-5 Wire Stripper
Kinetic Super Wire Stripper 10-18 AWG Solid
Kinetic Super Wire Stripper 16-26 AWG Stranded
Kinetic Super Wire Stripper 8-16 AWG Stranded
Kinetic™ Reflex™ Super T®-Stripper (10-18 Solid & 12-20 Stranded)
Kinetic™ Reflex™ Super T®-Stripper (6-14 Solid & 8-16 Stranded)
$13.99
$23.35
$23.35
$23.35
$24.52
$24.52
45-415, 45-615, 45-418,
45-621, 45-423
Reflex T-Stripper
- One-step stripping of outer jacket of
NM cable - no slitting required.
- Versatility to strip, cut, and loop
conductor wires with precision.
45-415
45-416
45-417
45-418
45-423
45-621
45-615
45-092
45-292
45-262
45-092, 45-262, 45-292
Stripmaster Wire Stripper
- Knife-type blades
- Wire gripper holds wire centered in
stripping hole.
- Eliminates nicking, cutting, and fraying
of commercial wire.
- Special POP packaging.
Reflex Premium T-5 Stripper 10-18AWG Solid
Reflex™ Premium T-6 Stripper (#16-#26 Stranded)
Reflex™ Premium T-7 Stripper (#22-#30 Solid)
Reflex™ Premium T-8 Stripper (#8-#16 Stranded)
Reflex™ Premium Cutter (1/2” Solid, #10 Stranded)
Dual NM Reflex™ Super T-Stripper
Reflex Super Wire Stripper 8-16 AWG Solid
Stripmaster Wire Stripper #10 to #22 AWG (Box)
Stripmaster Wire Stripper 10-22 AWG (Blister Card)
Coaxial Stripmaster, RG-6
$16.75
$16.75
$15.75
$18.65
$18.65
$23.85
$18.65
$36.65
$37.25
$38.65
Wire Strippers
45-120, 45-121, 45-125,
45-124
T-Stripper Wire Strippers
- Form-ground, knife-type
blades for easy stripping.
- Built-in wire cutter and
looping holes.
- Convenient plier nose for
extra gripping strength.
45-120
45-121
45-125
45-124
45-248
45-249
45-101
45-777
45-248, 45-249
45-101
45-777
45-074
NM Cable T-Stripper
- Easy, one-step stripping
of outer jacket of NM
cable - no slitting required.
- Versatility to strip, cut, and
loop conductor wires.
- Strips 12 or 14 AWG solid.
V-Notch Stripper
Seven-In-One Stripper
- Cuts copper or aluminum - Strips 8-16AWG solid and
wire, solid, or stranded.
10-18AWG stranded wire.
- Rotating cam wheel
- Cuts unhardened wire,
adjusts to strip 10-24
bolts and screws (4-40,
AWG wire.
6-32, 8-32, 10-24 and
- Holes for solid wire.
10-32) & reform threads.
T®-5 T®-Stripper (10-18 AWG Solid)
T®-6 T®-Stripper (16-26 AWG Stranded)
T®-7 T®-Stripper (22-30 AWG Solid)
T®-8 T®-Stripper (8-16 AWG Stranded)
14/2 NM Cable T®-Stripper
12/2 NM Cable T®-Stripper
V-Notch Stripper
Seven-In-One Stripper
$11.45
$11.45
$13.30
$12.80
$15.95
$15.95
$8.60
$21.30
30-428
Data T®-Cutter
Combo Tool
- Cuts round communication cable and - Convenient, four-function tool features
maintains cable geometry for better
precision-ground stripping holes and
cable performance.
knife-to-anvil cutting blades.
- Cuts multi-pair cable up to .5” and
- Crimps bare and insulated terminals.
coax cables up to RG-9/U.
- Strips 8 to 20 AWG solid and 10 to 22
- Suitable for soft cables (not ACSR)
AWG stranded wire.
- Cuts unhardened bolts (4-40, 6-32,
8-32, 10-24, and 10-32) and reforms
threads.
45-074 Data T®-Cutter
30-428 Combo Tool
$17.15
$30.00
Wire Strippers
45-248
45-778
NM Cable Dual-Hole T®Stripper
- Stripping holes for stripping
two 12 AWG or two 14 AWG
wires simultaneously.
- Ability to strip both conductor
wires of NM cable at a time.
45-248
45-778
45-123
45-128
45-129
84
45-123
Multi-Crimp Strip Tool
- Cuts wire.
- Crimps insulated and
non-insulated wires.
- Cuts bolts.
- Strips 10-22 AWG wire.
T®-Cutter Wire Cutters
- Hardened steel, sheertype blades.
- Up to 1/2” in O.D.
fine-stranded wire and
10 AWG solid wire.
Premium T®-14 T®-Stripper (12 or 14 AWG Solid)
Multi-Crimp Strip Tool
T-®Cutter Wire Cutter
Swivel-Blade® Cable Stripper (1/4” to 3/4” in O.D.)
Swivel-Blade® Cable Stripper (3/4” to 1 1/2” in O.D.)
Datacomtools.com
TM
45-128, 45-129
Swivel-Blade® Cable
Strippers
- For end/center stripping
of coax & power cables
from .75”-1.5” in O.D.
- Strips insulation to 5/32”.
- Spare blade in handle.
$15.95
$14.65
$12.80
$31.85
$40.05
1950, 1951
Pro Wire Strippers
- Stripping stations with a positive stop
provide precise stripping diameters.
- Long curved cutter blades reduce
force required by 25% and can cut
NM in a single cut.
- Lock tab protects cutting edges
during storage.
1950
1951
1916
1917
1918
1916, 1917, 1918
Terminator Wire Strippers
- Precision-ground blades ensure
consistent stripping.
- Heat treated for long life.
- Rust-resistant black oxide finish.
Pro Wire Stripper 10-18 AWG
Pro Wire Stripper 22-32 AWG
Terminator Wire Stripper 20-10 AWG Solid Wire
Terminator Wire Stripper 26-16 AWG Stranded Wire
Terminator Wire Stripper 30-22 AWG Solid Wire
$17.45
$17.45
$13.99
$24.15
$14.55
Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply
Wire Strippers
JIC-1022, JIC-1626, JIC-2030
JIC-375
JIC-175
Wire Stripper and Cutter
Fiber Optic Stripper Three Ergonomic Fiber Optic
The JIC-1022 Wire Stripper and Hole
Stripper
Cutter is designed to strip/cut
- Strips the 2-3 mm fiber
- Used for stripping the
the most commonly used
jacket down to the 900
250 micron coating from
stranded and solid wire gauges micron buffer coating.
the 125 micron fiber.
10 to 22 AWG and 1.6-3mm
- The second hole strips the - Preset at the factory
fiber jackets. The JIC-1626 is
900 micron buffer coating
so no adjustments are
designed for 16 to 26 AWG
down to 250 micron.
necessary.
wire. The JIC-2030 is designed - The third hole strips the
- Yellow plastic formed
for 20-30 AWG wire.
250 micron cable to fiber
handles, tool is 6” long.
w/o nicks or scratches.
JIC-1022
JIC-1626
JIC-2030
JIC-375
JIC-175
JIC-125
JIC-125
ST-500, ST-550, ST-450
OK-3907-2224, OK-3907-2226
Fiber Optic Stripper
The Fiber Optic Stripper
is used for stripping 250
micron buffer coating from
125 micron optical fiber.
Adjustable Precision Wire Strippers
These Precision Wire Strippers feature
an adjustment dial that allows the
operator to select one of six different
settings.
Adjustable Precision Wire Strippers
The OK-3907 Series wire strippers from
OK Industries is the industry’s leading
cut-and-strip tool for copper interconnect applications.
- Design prevents nicks or
scratches on the optical
fiber.
A calibrated wire stop can then be adjusted for the desired insulation strip
length. In a single motion, the operator
squeezes and pulls the tool.
Installers and telecom technicians
enjoy its construction and comfortable
rubber grips, which allows time savings
through the cutting of multiple wires.
Wire Stripper and Cutter
Wire Stripper and Cutter (16-26 AWG)
Wire Stripper and Cutter (20-30 AWG)
Fiber Optic Stripper Three Hole
Ergonomic Fiber Optic Stripper
Fiber Optic Stripper
$7.99
$7.99
$7.99
$21.15
$22.10
$18.50
ST-500
ST-550
ST-450
OK-3907-2224
OK-3907-2426
Adjustable Precision Strippers (20-30 AWG)
Adjustable Precision Strippers (18-28 AWG)
Adjustable Precision Strippers (26-36 AWG)
Adjustable Precision Strippers (22-24 AWG)
Adjustable Precision Strippers (24-26 AWG)
$39.49
$39.49
$38.95
$45.00
$45.00
Wire Strippers
1255
1257
3240
45-514
JIC-4473
JIC-4366
LC CST-58/59
2- & 3-level adjustable stripper
for RG58, RG59, RG62AU &
RG6 coaxial cable.
LC CST CATV
2-level stripper for RG59,
RG6 & RG6 Quad coax
cables. Pre-set for RG6
CATV “F” connectors.
CST Vario Stripper
Adjustable-blade coaxial
cable stripper for cable
diameters of 0.1 - 0.315”
(2.5 - 8.0 mm) including
RG58, RG59, RG62 &
Belden 1505A. Strips
outer jacket, shield braid,
and inner insulation down
to center conductor.
Cyclops® Data Cable
Stripper
Fast, Easy removal of outer sheath insulation. PVC
and Plenum types from all
Unshielded twisted pair
(UTP), Shielded Twisted
Pair (STP) and multicore
steel and designed to fit
comfortably in your hand.
Wire Stripper & Cutter
The latest development in wire stripping & cutting. Simply place the wire in
the stripping slot. Squeeze and pull.
Cable Sheath Stripper & Ring Tool
The Cable Sheath Stripper and Ring
Tool is good for copper cables as well
as tight buffer optical fiber cables.
- The wire is stripped and cut to the
exact length required.
- interchangeable blades 22-24 AWG
and 24-26 AWG.
- A larger “V” opening on the pliers and
no tools required for adjustments.
Used for butting and stripping cables
too large for hand held pliers. Use 1
blade to butt PVC sheathing and use
the second blade to strip the sheathing. Adjustable for .018” or .031” thick
plastic, rubber or fabric insulation.
Pre-set Strip Lengths: .315”
outer jacket, .157” inner
dielectric.
1255
1257
3240
45-514
Pre-set Strip Lengths: Outer
Jacket = .236”.
LC CST-58/59
LC CST CATV
CST Vario Stripper
Cyclops® Data Cable Stripper
$19.15
$15.25
$140.00
$51.55
JIC-4473 Wire Stripper & Cutter
JIC-4366 Cable Sheath Stripper & Ring Tool
$47.85
$43.50
Wire Strippers
1117
1161
1163
1113
1115P
1119
GripP-Stripper
Our newest wire strippers
combine ergonomics and
versatility! Strip 22-10 AWG
wire and cable for the most
common types: electrical wire,
hook-up wire & multi-conductor
cable. Also cuts flat cables.
Adjustable Jacket Stripper
Perfect tool for cutting
jackets from a variety of
fiber optic cable.
FiverOptic 5-in-1 Stripper
Multi-functional fiber
optic stripper removes
outer jacket, buffer only or
buffer and acrylate from
2.0-3.0 mm cable.
Stripax® Pro 6 Stripper/
Cutter (28-10 AWG)
The new stripax® Pro 6
and Pro 16 perform powerful stripping of standard
and industrial insulations
for a wire range of 28-10
AWG and 10-6 AWG.
Mini-stripax® plus Stripper/Cutter
Universal wire stripper and cutter that
uses changeable blades to strip PVC
and Teflon® insulation. Strips PVCinsulated wire in the range of 28-18
AWG and Teflon-insulated wire in the
range of 32-18 AWG.
Combo UTP/Coax SureStrip®
Cutter/Stripper
Professional all-in-one cutter & stripper
for both twisted pair & coaxial cables!
1117
1161
1171
1113
- Adjust blades with a
screwdriver for various
size cables.
GripP 10 Wire Stripper/Cutter (24-10 AWG)
Adjustable Jacket Stripper
FiverOptic™ 5-in-1 Stripper
Stripax® Pro 6 Stripper/Cutter (28-10 AWG)
Major Credit Cards Accepted
$13.90
$6.10
$47.98
$89.99
1115P
1119
- Cuts UTP/STP and coaxial cables.
- Strips Cat6, Cat5e, Cat5.
- Strips RG6, RG6 Quad & RG59.
coax cables for 2-level cable TV “F”
connectors.
Mini-stripax® plus Stripper/Cutter
Combo UTP/Coax SureStrip® Cutter/Stripper
1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com
$96.99
$27.25
85
Wire Strippers
CPT-WEB
CPT
CPT-RGTP
11231-255
11230-002
44210-013
Wire Stripper
The CPT-WEB is designed to
easily strip the outer cable
jacket, flatten, and separate
the webbed conductors of
Siemon’s category 5 cross-connect jumper wire and other UTP
cable with webbed conductor
pairs.
Wire Stripper
The CPT provides a simple
method to remove the outer
cable jacket. CPT is recommended for use with round
cable with an exterior diameter from 2.54-6.35mm and
an outer jacket thickness
from 0.380-0.635mm.
Cable Preparation Tool
AllPrep Cable Preparation
Tool prepares both coaxial
and twisted pair cable for
termination. The coax die
strips RG59 and RG6 coax
cable and the twisted-pair
die strips UTP, ScTP and
fiber cables.
Coax Stripper
The Coax Stripper has a
built-in Allen wrench for
adjusting the blade to prevent damage to the cable.
The Stripper is economical
for 2-level and 3-level stripping for RG58/RG59 and
62AU coax cable.
UTP/STP Cable Stripper
Economical, calibratable, tough
tool cutter. Adjustable blade depth
prevents damage to shield and
conductors. “Scores” cable to prevent
knicking wire when stripping. A length
gauge for repeated cutting/stripping
ensure accuracy. Cuts Round cable up
to 12 AWG.
Wire Stripper
This stripper assure quick, effortless
stripping of wire/cable insulation
without nicking or scratching the
conductor. Each stripper is made of
durable stainless steel and designed to
fit comfortably in your hand
CPT-WEB
CPT
CPT-RGTP
11231-255
Wire Stripper
Wire Stripper
Cable Preparation Tool
Coax Stripper
$7.50
$6.25
$39.00
$21.00
Wire Slitters
UTP/STP Cable Stripper
Wire Stripper
11230-002
44210-013
$26.00
$49.00
Scissors
1820, 1821
1822
CST-1900
ES-1964
925CS-ERGO
44300-000
AM25 & AM35 Slitters
Get the original tool designed
for slitting cable insulation!
Strip & slits around cables
with PVC, Teflon & THHM
Insulations. AM 25 for cables
less than 1” & AM 35 for cable
sizes 1.0 - 1.4”.
Universal Slitter
Slits and strips round cables
with a diameter of 0.18”
to 1.40”. Quickly removes
insulation without nicking
conductor. For power and
telecommunication cable
500-1200 MCM. Not suitable for XLP insulation.
Round Cable Stripper
The CST-1900 is designed
for fast and precise jacket
removal of PVC, rubber,
PE and other jacket
materials, and works
well on round cables with
diameters ranging from
3/16” to 1-1/8”.
Electrician Scissors
Made of high carbon steel
with a special hardening
process for greater durability and nickel plated for
that professional look.The
Scissors are notched to
strip 19 and 23 AWG wire
and one blade is serrated.
Ergonomic Scissors/Snips
The Model No. 925CS-ERGO features
one blade with an ergonomically
shaped cushioned palm rest. The
other blade has the traditional ring
bow. Other features include one serrated blade to prevent wire from sliding during cutting, stripping notches
for 19 ga. and 23 ga. wire.
Electrician’s D-Snips
The Electrician’s D-Snips features all
of the capabilities of the Electrician’s
Snips with a special ergonomic handle
that minimizes hand fatigue by enabling you to make cuts with less effort.
The D-Snips makes faster, cleaner, and
safer cuts.
1820
1821
1822
CST-1900
AM25 Slitter
AM35 Slitter
Universal Slitter
Round Cable Stripper
$46.75
$54.25
$24.45
$47.90
ES-1964
925CS-ERGO
44300-000
Electrician Scissors
Ergonomic Scissors/Snips
Electrician’s D-Snips
$9.99
$18.00
$23.00
Hand Wire Wrapping/Unwrapping Tools
Wire Wrapping/Unwrapping Tool
This two sided wire wrapping and unwrapping tool is intended to be two
tools in one. It is designed to produce perfect wire wrapping connections.
To switch from wire wrapping to unwrapping takes only seconds. Just a
quick change of the cap from one end to the other.
HW-UW-224 Wire Wrapping/Unwrapping Tool (22-24 AWG)
$69.85
Sleeved Unwrapping Tool
This versatile unwrapping tool with a funnelshaped spring loaded sleeve. This is a single
ended insulated tool with a yellow plastic
handle used for 20-26 AWG. 5 1/2” long.
UD-2224
Hand Wrap & Unwrap Tool
These wire wrapping tools do the job of two. These two sided tools allow for
quick change of wrapping to unwrapping and back, while the unused side
serves as a handle. 6” long.
WDUD-2000
WDUD-2224
WDUD-2600
WDUD-3000
Hand Wrap & Unwrap Tool (20 AWG)
Hand Wrap & Unwrap Tool (22-24 AWG)
Hand Wrap & Unwrap Tool (26 AWG)
Hand Wrap & Unwrap Tool (30 AWG)
$64.00
$64.00
$75.50
$75.50
86
Datacomtools.com
TM
$64.00
$22.70
Hand Wire Unwrapping Tool
This wire unwrapping tool is used to remove
wire connections made with 20 thru 26
gauge wire.
UW4
Unwrapping Tool 20-26 AWG
$30.00
Hand Wrap Tool
This manual wire wrapping tool allows you to
make uniform, gas-tight solderless wrapped
connections with 22 and 24 gauge wire. Red
handle. 5” long.
DSL Insulated Wrap and Unwrap Tool
Specifically designed for DSL connections. The wrapping side is designed
for 24-26 AWG wire, and the unwrap side is designed for 20-26 AWG wire.
Comes with an insulated handle for dielectric protection.
WDUD-26DS DSL Insulated Wrap and Unwrap Tool
Sleeved Unwrapping Tool
JIC-22681
Hand Wrap Tool
$16.45
Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply
Wire Wrapping Kits
Insulated Wire Wrapping Kit
This is a Wire Wrapping complete tool kit for technicians working at a Main
Distributing Frame where wire wrapping is required.
5-Piece Wire Wrapping Tool
Telecom wire wrapping kit used by technicians working at a main distribution frame
Includes:
- Wire wrapping bit 22-24 AWG
- Wire Wrapping Sleeve
- Long Nose Pliers
Includes:
- Wire Stripper & Cutter
- 3” Long Wire Wrapping Bit & Sleeve
- Hand Wrap & Unwrap Tool
WWK-CO
- Probe Pick
- Sleeved Unwrapping Tool
- Insulated Wire Loop Puller
Insulated Wire Wrapping Kit
$325.00
TK-WW5
5-Piece Wire Wrapping Tool
Wire Wrapping Kit
Complete and unique wire wrapping kit for working at a main distributing
frame or for field service use.
Insulated Wire Wrapping Kit
For working at a main distributing frame or for
field service use.
Includes:
- Wrap/unwrap tool
- Wire Wrapping Tool
- wire stripper 22-24 AWG
- Wire Wrapping Bit 22-24 AWG
- Wire Wrapping Sleeve 22-24 AWG
Kit Contains:
- Insulated Wire Wrapping Tool
- Wire Wrapping Bit 22-24 AWG
- Insulated Wire Wrapping Sleeve 22-24 AWG
- Sleeved unwrapping tool 20-26 AWG
- Wire stripper 22-24 AWG
WWK-1
Wire Wrapping Kit
$315.00
Battery & Electric Powered Wire Wrapping/Unwrapping Tool
WWK-1INS
Insulated Wire Wrapping Kit
Kit Includes:
- PTX Battery Wrap/Unwrap Tool
- PTX-BC1 Charger
- PTX-B 2 Batteries
- DFB224 Dual Function Wrapping/Unwrapping Bit/Sleeve Set, 22-24 awg
PTX Battery Powered Wire Wrapping Tool
115V Battery Tool Kit (Tool, Charger, 2 Batteries)
Electric Wrap/Unwrap Tool - 115V
Electric Wrap/Unwrap Tool w/Backforce - 115V
$325.00
Bits & Sleeves for Wire Wrapping
PTX Series Electric & Battery Powered Wire Wrapping/Unwrapping Guns
This wire wrapping tool has a maximum usage rating of 2,500 cycles/day,
will wrap 18 to 30 AWG wire. Available in both battery & electric models.
PTX-KIT1DH
PTX-KIT1
PTX-1
PTX-1BF
$244.95
$395.00
$319.00
$235.00
$240.00
Wire Wrap Guns
- Fully compatible with any make/model wire
wrap tool.
- 3” bits & sleeves. Call for other sizes
AWG
22-24
22-24
24
24
26
26
Bit Part #
KB224
Sleeve Part #
P2224
KB24
P2426
KB26
P2426
Price
$39.65
$17.25
$39.65
$17.25
$39.65
$17.25
Wrap/Unwrap Bit/Sleeve Set
This patented product represents a truly
revolutionary approach to wire wrapping, by
combining the wire wrapping and the wire
unwrapping functions into one bit/sleeve set.
G100/R3278INS
G100/R3278FL
G200/R3278
G100/R3278
OK Industries line provides up to 10 revolutions per squeeze of the trigger. Accommodates wire sizes
from 18 AWG-32 AWG using our full range of interchangeable wrapping bits and sleeves.
G100/R3278INS
G100/R3278FL
G200/R3278
G100/R3278
Insulated Wire Wrap Gun
Insulated Wire Wrap Gun w/ Flashlight
Lexan Wire Wrap Gun
Aluminum Wire Wrap Gun
$125.00
$130.00
$95.00
$112.50
The bit is precision machined for high quality
wire wrapping in the clockwise direction, but
also includes the removal mechanism that
is used to unwrap when operated counterclockwise. The user can easily switch back and forth between wrap
and unwrap mode by retracting or extending the retractable sleeve,
and flipping the switch on a PTX Wire Wrapping Power Tool. To prevent
pin-to-pin shorting, the retractable wire wrapping sleeve is coated with a
durable 1000V dielectric material.
DFB224
Wrap/Unwrap Bit/Sleeve Set
$95.99
Kynar Insulated Silver Plated Wire
Wire Wrap Guns
Ideally suited for many applications including
production line work and wire wrapping. This
wire is OFHC & provides a flexible yet abrasion
resistant wire. The 24-28 AWG wire is UL 1422
and the 30 AWG wire is 1423. Wire is copper
with 105°C maximum insulation temperature.
Available in Blue, Yellow, White, Black, & Red
*KSW for cut/strip/wrap applications. Low strip force
wire is further processed for a low strip force for use with CSW bits and sleeves
WG-350INS
WG-350
WG-350L
The Jonard line provides up to 10 revolutions per squeeze of the trigger, and accommodates wire sizes
from 18-32 AWG. All wire guns are used for the electronics and telecommunication industries.
WG-350INS
WG-350
WG-350L
Insulated Wire Wrap Gun
Aluminum Wire Wrap Gun
Lexan Wire Wrap Gun
Major Credit Cards Accepted
$105.00
$95.00
$75.00
Part #
R24X-0100
R26X-0100
R28X-0100
R30X-0100
KSW-24X-0100*
KSW-26X-0100*
KSW-28X-0100*
KSW-30X-0100*
Insulation Dia.
0.030”
0.027”
0.024”
0.025”
0.030”
0.027”
0.0235”
0.0195”
Roll Size
100ft
100ft
100ft
100ft
100ft
100ft
100ft
100ft
Wire Size
24 AWG
26 AWG
28 AWG
30 AWG
24 AWG
26 AWG
28 AWG
30 AWG
1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com
Price
$19.00
$14.45
$12.50
$11.25
$25.50
$22.60
$22.60
$21.25
87
Fluke Networks Punchdown Tools
D914S Automatic Impact Tool
SoftTouch D914™S Impact Tool includes a built in probe pic/spudger allowing you to choose from high & low impact settings.
D914S
D914S with 66/100 dually & Bix blade
D914S with 66/100 & free blade
D914S with both 66 & 110 blades
D914S with 66 blade
D914S with 110 blade
10061-503
10061-501
10061-120
10061-100
10061-110
$96.00
$81.00
$81.00
$71.00
$71.00
D914 Automatic Impact Tool
The D914™ automatic impact tool is the only punch down tool to combine
torque & impact. Combines two tools, the hook & spudger, into the handle.
D914
D914 with 66/110 & free blade
D914 with 66 & 110 blades
D914 with 66 blade
D914 with 110 blade
10051-501
10051-120
10051-100
10051-110
$70.00
$70.00
$58.00
$58.00
D814 Punchdown Tool
Deluxe, all-in-one, telecom punch-down tool. Impact wheel has high & low
settings. Automatic spring impacts to seat and/or terminate wires.
D814
D814 with 66/110 dually & Bix blade
D814 with 66/110 & free blade
D814 with both 66 & 110 blades
D814 with 66 blade
D814 with 110 blade
10055-503
10055-501
10055-200
10055-000
10055-110
Fluke Networks increases the versatility
and flexibility of its line of impact tools by
offering a wide variety of interchangeable
blades that permit each tool to perform
multiple functions. Fluke Networks has
the blades you need to terminate blocks
and jacks quickly.
$81.00
$62.00
$62.00
$52.00
$52.00
Fluke Network Replacement Punchdown Blades
10176-000
110 replacement blade
10056-000
66 replacement blade
10176-500
110 Eversharp replacement blade*
10056-500
66 Eversharp replacement blade*
10178-600
110/66 Eversharp dually replacement blade*
10665-000
Bix replacement blade
10565-000
Krone replacement blade
10565-110
Krone dually replacement blade
10465-001
3M system “D” bit replacement blade
10057-000
630 replacement blade
10436-001
Center Punchdown replacement blade
10051-200
Screwdriver replacement blade (D914)
10645-001
Wood screw started punch replacement blade
10051-300
66 torque adapter replacement blade (D914)
$18.00
$18.00
$21.50
$23.00
$30.00
$47.00
$48.00
$63.00
$67.00
$21.00
$17.00
$21.50
$17.00
$29.00
*Eversharp blades last three times longer than standard punchdown tool blades.
Paladin Tools Punchdown Tools
SurePunch Pro Punchdown Tool
SurePunch Pro is the first and only punchdown tool to have a detachable
light making it easy to work in dark places.
SurePunch Pro
3590
3588
3596
3597
3598
3599
SurePunch Pro PDT Handle (no blade) & Light
SurePunch Pro PDT w/110/66 cut blade & light
SurePunch Pro PDT w/110 reversible cut & punch blade
SurePunch Pro PDT w/66 reversible cut & punch blade
SurePunch Pro PDT w/BIX™ Cut-only blade & light
SurePunch Pro PDT w/Krone LSA cut-only blade & light
$55.55
$63.99
$63.99
$63.99
$74.00
$85.75
SurePunch Punchdown Tool
Lanyard holes in the end make the SurePunch PDT easy to carry and hard
to misplace. Uses twist-and-lock-style blades.
SurePunch
3570
3571
3572
3573
3574
3575
3579
SurePunch PDT Handle only
SurePunch PDT w/110/66 combination cut-only blade
SurePunch PDT w/110 reversible cut & punch blade
SurePunch PDT w/66 reversible cut & punch blade
SurePunch PDT w/BIX cut-only blade
SurePunch PDT w/Krone LSA blade
SurePunch PDT w/110 & 66 reversible cut & punch blade
$45.45
$54.15
$54.15
$54.15
$59.00
$59.00
$58.95
Impact Punchdown Tool
Impact punchdown tool for terminating AWG 28-24 telephone cables into
66, 88, 108, 109, 110, 630A6, Bix™ & Krone®-type bifurcated terminals.
Impact
3526
3527
3528
3535
3536
3532
Impact Punchdown Tool - handle only
Impact Punchdown Tool w/66 blade
Impact Punchdown Tool w/110 blade
Impact Punchdown Tool w/630 blade
Impact Punchdown Tool w/BIX-type blade
Impact Punchdown Tool w/Krone-type blade
$38.45
$52.40
$52.40
$55.90
$69.90
$55.90
Blades for Impact PDT
Blades for SurePunch & SurePunch Pro PDT
110
630
Bix™
110/66
110
66
Bix™
4528
4529
4530
4571
4572
4573
4574
Paladin Tools Replacement Punchdown Blades
4571
SurePunch 110/66 Combination Cut-Only Blade
4572
SurePunch 110 Reversible Blade
4573
SurePunch 66 Reversible Blade
4574
SurePunch BIX Cut-Only Blade
4528
Standard Punchdown Replacement 110 Blade
4529
Standard Punchdown Replacement 630 Blade
4530
Standard Punchdown BIX Type Blade
$14.30
$14.30
$14.30
$23.50
$18.45
$15.50
$29.99
Platinum Tools Punchdown Tools
PRO Series Punchdown Impact
Tool terminates & trims wires in 66, 110 krone & BIX cross connect blocks.
Used to terminate and trim wires in 110 & 630 style wall jack modules.
Pro Impact
13100
13105
13106
13107
13108
13109
PRO Punchdown Impact Tool Handle Only
PRO Punchdown Impact Tool w/66 blade
PRO Punchdown Impact Tool w/110 blade
PRO Punchdown Impact Tool w/ 66 & 110 Blades
PRO Punchdown Impact Tool w/110 EZ-Data Cut Blade
PRO Punchdown Impact Tool w/66/110 Combo Blade
$35.00
$48.00
$48.00
$60.00
$55.00
$48.00
EZ-Tune Punchdown Tool
Tool terminates/trims wires in 110 & 630 wall jack modules.
13200 EZ-Tune Punchdown Tool, Handle Only
13208 EZ-Tune Punchdown Tool with 110 EZ-Data Cut Blade
$39.95
$58.95
EZ-Tune
Punchdown Impact Tool
Tool can terminate and trim wires in 110 & 630 style wall jack modules.
Compatible with tools & blades by Harris, Ideal, & others
Impact
88
13000
13005
13006
13007
Punchdown Impact Tool Handle Only
Punchdown Impact Tool w/66 blade
Punchdown Impact Tool w/110 blade
Punchdown Impact Tool w/66 & 110 Blades
Datacomtools.com
TM
$33.50
$45.00
$45.00
$56.95
66
110
630
66/110
110 EZData
Bix
Krone
PDT
Extension
13001
13002
13003
13004
13021
13023
13024
13022
Platinum Tools Replacement Punchdown Blades
13001
13002
13003
13021
13004
13022
13004BL-C
13023
13024
66 Style Blade
110 Style Blade
630 Style Blade
66/110 Combo Blade
110 Style EZ-Data Cut Blade
Punchdown Tool Extension
110 Style EZ-Data Cut Blade Knives, 3 Pack
BIX™ Style Blade
Krone™ Style Blade
$13.95
$13.95
$13.95
$13.95
$18.95
$17.95
$7.50
$28.50
$28.50
Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply
Pro-Tool Kits
All the professional tools you need to cut, strip, clean and connect network phone and data lines to blocks
and jacks. Bundled together in our sleek form-fitting PVC Dur-A-GripTM Tool Pouch holds your tools securely
inside, even upside down. Six tool kits combinations to choose from to meet a multitude of applications.
- All kits include ergonomically designed Dur-a-Grip pouch for convenient tool storage on belt
- D914™ and D814™ industry standard punchdown tools make for solid terminations
- Easy to use cable stripper quickly rings and slits many types of cable
- Cut and strip wire cleaner and faster with the Electricians’ D-Snips
- Six tool kits combinations available for a multitude of applications
IS40
IS60 Pro-Tool Kit: D914S Impact Tool, Electrician’s D-Snips, Cable Stripper, Mini Maglite, & Dur-a-Grip Pouch
IS50 Pro-Tool Kit: D914S Impact Tool, Electrician’s D-Snips, Cable Stripper, EverSharp 66/110 Cut Blade,
and Dur-A-Grip Pouch
IS50
IS40 Pro-Tool Kit: D814 Impact Tool, Electrician’s D-Snips, Cable Stripper, EverSharp 66/110 Cut Blade,
Probe Pic, and Dur-A-Grip Pouch
11293-000
11292-000
11291-000
IS60 Pro-Tool Kit
IS50 Pro-Tool Kit
IS40 Pro-Tool Kit
$174.00
$149.00
$141.00
IS60
Krone Punchdown Tool
The Versatile Krone Tool the only one you need. The Krone Tool terminates and trims wires with one punch.
It’s the only tool you’ll need to add, Change or remove Krone connections.
6417-2055-01 Krone Punchdown Tool
$70.00
ProPunch 110 Multi-pair Punchdown Tool
- Smooth operation
- Comfortable, rugged handle absorbs punch recoil
- Cut and punch blade cassette or switch blades for punch only
- Terminates 28-22 AWG (.08-.34 mm²) solid or stranded wires with single insulation - Delivers more than 1.5 times the force of other multi-punchdown tools on the market using less hand force
- Terminates in a single punch - including 23 AWG Cat6 cable
- Performs in excess of 30,000 cycle punches
3560
3561
ProPunch 110 5 Pair Punchdown Tool
ProPunch 110 4 Pair Punchdown Tool
$18.25
$18.25
D-Impactor 5-Pair Impact Tool
The D-Impactor™ 5-pair impact tool allows technicians to simultaneously cut and terminate five copper
pairs on a 110 block. This rugged, easy-to-use tool saves time and reduces hand stress by cutting down on
the total number of manual terminations, and combining the cut and no-cut blades into a single unit allows
users to reverse cutting blades at record speeds. Fewer moving parts and the patented blades guarantee
optimal performance for the life of the tool.
10059-000
D-Impactor 5-Pair Impact Tool
$182.00
C5 Tool
The 5-pair termination tool is a versatile impact tool designed to terminate and cut UTP cable, and seat
connecting blocks. The impact mechanism and termination blades have been designed to reliably
terminate and cut UTP cable the first time, every time. Features an easy to hold, ergonomically designed
handle that helps reduce fatigue when trimming wire or seating connection blocks to the wiring base.
S788J5
C5 Tool
$265.00
Major Credit Cards Accepted
1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com
89
EZ-RJ45 Connectors
The EZ-RJ45 connectors, simplify twisted pair terminations by allowing the wire to be
inserted through the connector and out the front. This allows the technician to easily
verify the proper order. Electrical performance of the termination is optimized by pulling
the connector down over the cable jacket & seating tightly in the rear of the connector.
It also guarantees that the wires will be properly flush to the front of the connector.
202003J
202035J
202010J
202036J
EZ-RJPRO™ HD Crimp Tool
EZ-RJ45® Connectors, Jar of 100
Strain relief for EZ-RJ45® Cat. 5e connectors, Jar of 100
EZ-RJ45® Cat 6+ connectors, Jar of 100
Strain Relief EZ-RJ45® Cat 6+ connectors & shielded Cat 5e connector, Jar of 100
$62.00
$24.00
$70.00
$24.00
The new EZ-RJPRO™ HD Crimp Tool is designed for the professional installer providing a ratcheted, high leverage, ultra stable platform for consistent, repeatable terminations. This heavy duty tool is the perfect solution
when working with high performance, larger OD cables that are tougher to terminate due to larger wire gauges, thicker, harder insulation on the conductors and pair separating splices. Not only will you overcome these
connectivity obstacles but you can be assured that every termination will meet FCC specifications. Compatible
with all EZ-RJ45® and EZ-RJ12/11 connectors as well as all standard modular plugs, except AMP.
100054C
Telemaster Kits
EZ-RJPRO™ HD Crimp Tool
$86.95
33-750:
- Basic termination kit for 10Base-T
- Includes, UTP/Coax Stripper, Telemaster RJ-11/RJ-45 Tool, (50) 8-Position RJ-45 Non-Keyed Solid Plugs
- Durable hard case
33-704:
- Basic kit with multifunctional telephone tool to cut, strip, and crimp
- Kit includes, Telemaster™ for RJ-11/RJ-45 Plugs, (15) 4-Position, RJ-11 Stranded Modular Plugs, (15)
6-Position, RJ-11 Stranded Modular Plugs, (15) 8-Position, RJ-45 Stranded Modular Plugs
- Durable hard case
33-750
33-704
Basic Data & Video Kit
33-750
33-704
Economy 10Base-T Telemaster Kit
RJ-45, RJ-11 Telemaster™ Kit
- Basic Data and Video Kit
- Data T-Cutter
- UTP Stripper
- Stripmaster Wire Stripper for RG-6
- Punchmaster II Punch Down Tool w/ 110 Blade
- OmniSeal XL Compression Tool
- TRACETone Tone Generator & Amplifier Probe
- VDV Multimedia Cable Tester
- Journeyman Electrician’s Tote
33-916
Data & Video Kit
Basic Data & Video Kit
33-917
Datacomtools.com
$395.00
Kit includes professional tools to terminate both coax and twisted pair cables. VDV gives user the ability to
test terminated cables.
- Data/Video Kit
- Data T-Cutter
- 7-in-1 Screwdriver
- UTP Stripper
- Coax Stripper w/ replacement Cartridge
- Punchmaster II Punch Down Tool w/ 110 Blade
- 110/66 Blade combo punch down blade
- Crimpmaster Crimp Tool for RJ-45 Modular Plug
90
$115.00
$68.15
TM
Data & Video Kit
- OmniSeal XL Compression Tool
- Probe Pic and Spudger
- F/BNC Connector Insertion/Removal Tool
- VDV Multimedia Cable Tester
- Amplifier Probe
- Electrician’s Scissors w/ Stripping Notch
- Large Mouth Bag- 13 in.
$495.00
Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply
99 Series Hand Tool Kits
Series 99 Interchangeable
Blade Tool Kit
- 39-piece kit contains popular
Series 99 tools.
- 2 extra pockets permit addition
of pliers, snips, or other tools.
- Available in a roll-up canvas case.
L: 14” W: 13.25” H: 10.1”
Weight: 23.68lbs.
99MP
99SM
99SMX
23-Piece Series 99 Service Roll
Kit, Plastic Case
- Versatile 23 piece set of tools.
- Provides quick change tools &
tool combinations.
- Speeds assembly/service work.
- Available in a hard plastic case.
L: 10.875” W: 10” H: 9.25”
Weight: 17.4lbs.
L: 15.625” W: 15” H: 9”
Weight: 25.8lbs.
39-Piece Series 99 Inerchangable Blade Tool Kit
23-Piece Series 99 Service Roll Kit, Canvas Case
23-Piece Series 99 Service Roll Kit, Plastic Case
9-Piece & 11-Piece Series 99
Allen Hex Screwdriver Set
- 9-Piece & 11 Piece Series 99
screw/nutdriver sets.
- See thru plastic case
99PS41MMBP
99PS41MM
99PS40BP
99PS40
99PS40V
99PS51MM
99PS50
99PS50V
23-Piece Series 99 Service Roll
Kit, Canvas Case
- Versatile 23 piece set of tools.
- Provides quick change tools &
tool combinations.
- Speeds assembly/service work.
- Available in a roll-up canvas case.
13-Piece Series 99 Screw/
Nutdriver Set
- 13-piece screw/nutdriver set.
- Stand-up plastic case.
$193.20
$166.95
$166.95
12-Piece Series 99 Compact
Nutdriver Set
- 12-Piece Nutdriver Set.
- Convenient see-through stand-up
plastic case.
9-Piece Series 99 Ballpoint Allen Hex Screwdriver Set
9-Piece Series 99 Standard Allen Hex Screwdriver Set
11-Piece Series 99 Ballpoint Allen Hex Screwdriver Set
11-Piece Series 99 Standard Allen Hex Screwdriver Set
11-Piece Series 99 Allen Hex Screwdriver Set, SAE, Carded Set
12-Piece Series 99 Compact Nutdriver Set, Metric
13-Piece Series 99 Compact Screwdriver and Nutdriver Set
13-Piece Series 99 Compact Screwdriver and Nutdriver Set, Carded
$55.11
$44.31
$67.65
$44.88
$44.88
$61.00
$56.68
$56.68
14-Piece Series 99 Screw/
Personal Computer Repair Kit
Nutdriver Set
- Ideal for repairs on PC’s
- Kit contains: 9 regular nutdriver
- Contains 12 anti-static ship tools.
blades, 2 slotted & 2 Phillips
- Tools fit securely in roll-up pouch.
screwdrivers, 1 amber handle, & a
roll-up canvas case.
L: 10” W: 8” H: 6”
Weight: 8.4lbs.
99PR
99SPC
14-Piece Multi-Purpose Set
Personal Computer Repair Kit
Torx Screwdriver Blade Kit
- Interchangeable Blades.
- Contains 6 blades, 4” long &
regular 991 amber handle.
99XTD7
99PA50
$72.54
$45.91
Stubby Blade Tool Kit
- Series 99 screw/nutdriver Set.
- Contains 12 screw/nutdriver sizes.
- Convenient vinyl carry pouch.
Torx Screwdriver Blade Kit
Stubby Blade Tool Kit
$31.23
$23.33
Insulated Hand Tool Kits
25-Piece Jouneyman Insulated Kit
- Reflex super T-Stripper wire stripper
- Wire stripper cutter
- 9 1/4” side linesman pliers
- 8” diagonal pliers w/angled head
- 8 1/2” long nose pliers
- 10” tongue and groove pliers
- 9 1/2” high-leverage cutter
- 9 3/4” multicrimp tool
- Knife
- Volt-sensor NCV tester
- Fuse Puller - 7 1/2” long
- Heavy-Duty soft tool case
Insulated Nutdrivers
- Hex Nutdrivers: 3/16”, 1/4”, 5/16”, 3/8”,
7/16”, 1/2”, & 9/16”
35-9304
- Screwdrivers: 1/8” x 3”, 3/16” x 5”, 1/4” x 6”, 5/16” x 6” & 3/8” x 8”
Phillips: #1 x 3”, #2 x 4”, #3 x 6”
- Hex Nutdrivers: 3/16”, 1/4”, 5/16”, 3/8”, 7/16” & 1/2”
35-9302
25-Piece Jouneyman Insulated Kit
17-Piece Standard Insulated Kit
- Reflex super T-Stripper wire stripper
- 9 1/4” side linesman pliers
- 8” diagonal pliers w/angled head
- 8 1/2” long nose pliers
- 10” tongue and groove pliers
0257-01I
17-Piece Standard Insulated Kit
- Screwdrivers: 3/16” x 5” & 1/4” x 6”
Phillips: #2 x 4”
9-Piece Basic Insulated Kit
Major Credit Cards Accepted
$76.80
$665.00
9-Piece Basic Insulated Kit
- Reflex super T-Stripper wire stripper - 8 1/2” long nose pliers
- 9 1/4” side linesman pliers
- 9 1/2” high-leverage cutter
- 8” diagonal pliers w/angled head
- Fuse Puller - 7 1/2” long
- Heavy-Duty soft tool case
35-9300
7-Piece Insulated Nutdriver Set
7-Piece Insulated Screwdriver Kit
- Slotted head:
3/32” x 3”, 1/8” x 4”, 1/4” x 6”, & 5/16” x 7”
- Phillips: #1 x 3”, #2 x 4”, & #3 x 6”
- Screwdrivers: 1/8” x 3”, 3/16” x 5”, 1/4” x 6”, 5/16” x 6” & 3/8” x 8”
Phillips: #1 x 3”, #2 x 4”, & #3 x 6”
35-9301
$188.35
7-Piece Insulated Nutdriver Set
- Rated to 1000V AC/DC
- Meets IEC 60900 & ASTM F1505 standards.
- Heavy-duty, built for longer life.
- Rugged deep well sockets for screw clearance.
- Precision heads for accurate fit.
$895.00
- 9 1/2” high-leverage cutter
- Volt-sensor NCV tester
- Fuse Puller - 7 1/2” long
- Heavy-Duty soft tool case
- Electrician’s skinning knife
Insulated Nutdriver Kit with Hard Case
$424.95
TK-70-INS
7-Piece Insulated Screwdriver Kit
$30.35
11-Piece Insulated Tool Kit
- Slotted head:
3/32” x 3”, 1/8” x 4”, 1/4” x 6”, & 5/16” x 7”
- Phillips: #1 x 3”, #2 x 4”, & #3 x 6”
- Linemans plier 7 1/4”
- Long nose plier 6 1/4”
- Diagonal plier 6 1/4”
- Wire Stripper 6 1/2”
TK-110-INS 11-Piece Insulated Tool Kit
1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com
$97.65
91
Hand Tool Kits
8 & 5 Piece Screwdriver Set 35-298 35-297
1/4” x 6” HD cabinet
•
•
1/4” x 6” shank keystone
•
1/4” x 4” HD keystone
•
•
5/16” x 6“ keystone
•
•
3/16” x 3” cabinet
•
3/16” x 6” cabinet
•
•
Phillips #1 x 3”
•
Phillips #2 x 4”
•
•
Heavy-duty vinyl pouch
•
•
35-298
35-297
35-299
0153-42C
35-299: Nutmaster 7pc Set 0153-42C: 6-in-1 Multi-Tool
- Included: 3/16” x 3 1/4”, - Versatile multi-bit screwdriver,
1/4” x 3 1/4”, 5/16” x 3
6 tools in one.
1/4”, 11/32” x 3 1/4”,
- Precision machined, steel bits
3/8” x 3 1/4”, 7/16” x 4”, - High-grade, rust resistant,
1/2” x 4”.
chrome-plated finish
8-Piece Screwdriver Set
5-Piece Screwdriver Set
Nutmaster 7-Piece Set
6-in-1 Multi-tool
$53.69
$39.40
$58.89
$7.25
0253-01C: 7-Piece Nutdriver Set
7 & 4 Piece Screwdriver Sets
- Included: 3/16”, 1/4”, 5/16”,
- Included in 0153-02C: 3/16” x
4”, 3/16” x 6” & 1/4” x 4” cabinet, 11/32”, 3/8”, 7/16”, & 1/2”
- Hollow shaft for screw clearance.
1/4” x 4” & 5/16” x 6” keystone,
- Handle marked for easy
#1 x 3” & #2 x 4” Phillips.
identification of nutdriver use.
- Included in 0353-01C:
Phillips #0, #1, #2, & #3
7-Piece Screwdriver Set
4-Piece Screwdriver Set
7-Piece Nutdriver Set
0153-02C
0353-01C
0253-01C
$39.98
$22.99
$33.45
Hand Tool Kits
11-Piece Compact Convertible
Screw/Nut Driver Set
- Equipped with the black,
“Piggyback” amplifier handle.
- Set housed in an easy to open,
clear plastic case
PS130
HS618
413MM
10-Piece SAE Full Hollow Shaft
Nutdriver Kit
- Nutdrivers included: 3/16”,
7/32”, 1/4”, 9/32”, 5/16”,
11/32”, 3/8”, 7/16”, 1/2”, &
9/16”
10-Piece Metric Drilled Shaft
Nutdriver Kit
- Nutdrivers Included: 4mm, 5mm,
6mm, 7mm, 8mm, 10mm,
11mm, & 13mm
11-Piece Compact Convertible Screw/Nutdriver Set
10-Piece SAE Full Hollow Shaft Nutdriver Kit
10-Piece Metric Drilled Shaft Nutdriver Kit
$37.64
$60.46
$62.24
34 Piece Dura-Driver Power Driving
Ratcheting Screwdriver Kit
- Screwdriver with 3 torque positions.
- 7 power nutdrivers, SAE.
- 7 Power Nutdrivers metric.
- 18 screwdriver bits.
- Storage case
39 Piece Dura-Driver Mechanics
Ratcheting Screwdriver Kit
- Dura-driver ratchet screwdriver.
- 9 fractional & 9 metric sockets.
- 18 screwdrivers bits.
- 2 socket adapters.
- Storage case
39-Piece Screwdriver Kit
34 Piece Screwdriver Kit
SDMBR1
SDMBR2
$37.07
$37.07
Hand Tool Kits
33-Piece Screwdriver Set
Micro Mini II Screwdriver Set
Hollow Shaft Nut Drivers
- Bits Included: Slotted: 2.0, 1.5,
These are full length hollow shaft - Contains: Pozi Drive PZ1 & PZ0,
Phillips: 000, 00, 0, 1. Slotted:
1.2, 1. Phillips: 0000, 000, 00, 0.
nutdrivers for working with long
1, 1.5, 2, 2.5, 3, 3.5, 4. Torx®: 4,
Torx®: 3, 4, 5, 6
bolts. Designed with ergonomic
5, 6, 7, 8, 9, 10, 15, 20. Hex: 0.7,
color coded handles. Handles
0.9, 1.3, 1.5, 2, 2.5, 3, 4, M5 & 6
provide greater torque and user
Socket, M4 Shaft
comfort. Overall length 7”.
ND631
19101
19103
Hollow Shaft Nut Drivers
33-Piece Screwdriver Set
Micro Mini II Screwdriver Set
$38.00
$20.95
$13.79
Twist-a-Nut™ Wire Connector Tools
Twist-a-Nut Conduit Wiring Kit
- Includes Twist-a-Nut™
Screwdriver, Twist-a-Nut™
Deburring Head Square Tip,
Tap Tool Shaft, 3 Spare Bits &
8-pocket carrying Pouch.
35-926
35-922
35-908
35-909
35-988
92
Twist-a-Nut™ Conduit Wiring Kit w/7-in-1 screwdriver
6-in-1 Twist-a-Nut™ Tapping Tool
7-in-1 Twist-a-Nut™ Screwdriver/Nutdriver
7-in-1 Twist-a-Nut™ Screwdriver/Nutdriver with square tip
9-in-1 Ratch-a-Nut™ Screwdriver
TM
TAL-001C Plastic Shaft Autoloader, Multi-Bit Screwdriver
TPAL-001C Metal Shaft Autoloader, Multi-Bit Screwdriver
TBK-001C 31 Piece Bit kit in Clam-Shell Packaging.
$22.95
$31.95
$22.95
Wire Connectors
6-in-1 Twist-a-Nut™ Tapping Tool 9-in-1 Ratch-a-Nut Screwdriver
- Forms new threads, re-forms
- Ratcheting wire connector
burred threads and cleans out
wrench prevents finger fatigue
obstructions.
and gets in tight spots.
- Handle is interchangeable w/7-in- - Ergonomic, slip-free comfort grip
1 Screwdriver & Conduit Deburrer - Accepts Twist-a-Nut™ bits.
Datacomtools.com
Autoloader Multi-Bit Screwdrivers 31 Piece Bit Kit
- Pump action changes bits instantly - Contains: Phillips: P0, P1, P2, PHR2,
P3. Slotted: 5/32” (2pcs.), 7/32”,
1. Pull back the handle
1/4”, 9/32”. Torx: T10, T15, T20,
2. Rotate the shaft to select your
T25, T27, T30, T40. Hex: 5/64”,
desired bit.
3/32”, 7/54”, 1/8”, 9/64”, 5/32”,
3. Push the handle forward.
3/16”, 7/32”, 1/4”
Your bit is delivered instantly!
$50.15
$24.25
$11.20
$10.95
$21.30
- Wire-nut: Fixed, square-wire
spring creates its own threads maintains a secure positive grip
- Wing-nut: Wings provide a
secure grip for extra leverage on
maximum wire combinations.
- Twister: Ribbed cap provides a
secure grip.
Wire-Nut
Part #
30-071
30-072
30-073
30-074
30-076
30-651
30-652
30-341
30-342
Wing-Nut
Type
Wire-nut
Wire-nut
Wire-nut
Wire-nut
Wire-nut
Wing-nut
Wing-nut
Twister
Twister
Twister
Wire Size
22-16 AWG
22-14 AWG
22-14 AWG
18-12 AWG
18-10 AWG
18-10 AWG
18-8 AWG
22-8 AWG
18-8 AWG
Voltage Rating
300V
300V
600V
600V
600V
600V
600V
600V
600V
Qty
100
100
100
100
100
500
500
100
50
Color
Gray
Blue
Orange
Yellow
Red
Yellow
Red
Tan
Gray
Price
$63.45
$71.55
$82.85
$94.85
$140.00
$79.65
$102.35
$132.00
$254.95
Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply
Terminal Crimp Kits
500-037: Terminal Crimp Kit
- Ratcheted crimper
- Ring insulated terminal: 22-16
AWG x 50, 16-14 AWG x 40,
12-10 AWG x 20.
- 1300 series terminal crimper. - Butt splice insulated: 22-16AWG
- Assorted 22-12 AWG terminals. x 30, 16-14AWG x 20, 12-10 x 15.
4305: Terminal Crimp Kit
Economical terminal crimper kit
for electrical and control panel
installation and wiring.
4305
1308
500-037
STK-1
STK-1: Terminal Box
- 1 Scotchlok crimping tool.
- 1 ScotchCode tape dispenser.
- 100 cable ties 06225.
- 100 cable ties 06226.
- Plus more. For full listing go to:
www.datacomtools.com
Terminal Crimp Kit
Insulated Lug Crimper (crimps 22-10 AWG insulated terminals & lugs)
Terminal Crimp Kit
Scotchlok Terminal Box
$73.85
$58.99
$33.85
$179.99
1921: Terminators Combo Tool
- Crimp, strip, & cut wire with one
tool & also cut/rethread screws.
- Hardened alloy steel with black
oxide finish.
- Pivot joints w/steel brushing
- New, softer grips.
1923: Crimping/Stripping Tool
- Up-front cutter for snipping hard-toreach wires.
- Narrow nose for tight boxes
- Wire loping holes in jaw.
- Screw cutting stations are
collapsed around the pivot - 20%
less force is required.
Terminators Combination Tool
Crimping/Stripping Combination Tool
1921
1923
$28.20
$24.15
JIC-22035
Price:
$15.00
$15.99
$11.95
$10.45
$11.95
PROBE-PIC
Brand:
Fluke Networks
Paladin Tools
Jonard
Jonard
Jonard
1923
44007000
1900
M-216C/REX
M-216C/RX
M-216C/EX
1915
- 3/8” & 7/16” hex sockets to open panels.
For more info on can wrenches go to:
www.datacomtools.com
44600000
M-216C/EX
M-216C/RX
M-216C/REX
1900
44007000
Can Wrenches & Probe Picks
- Excellent for positioning, tracing,
separating, and removing cut pieces
of insulation and wire.
44600000
1915
PA1923
PROBE-PIC
JIC-22035
Brand:
Fluke Networks
Paladin Tools
Paladin Tools
Siemon
Jonard
Price:
$6.00
$4.20
$9.25
$3.25
$2.75
Cable Tie Guns & Ties
Cable Ties
Cable Tie Installation Tool
Cable Tie Bag
- Consistent, positive tension.
- Keeps your cable ties right where
- Flush cut-off leaves no projections you need them, eliminates loss
to damage nearby wires or
with this convenient bag that
components.
clips securely onto your belt.
- Use with ties up to 0.25”
- Adjustable tension for changing - Scrap tail stays in tool until trigger - Cable Ties are not included
is released.
cable bundle pressure.
Cable Tie Gun
Cable tie gun for tightening ties
around wire & cable bundles.
1828.1
41-990
IT-BAG
Cable Tie Gun
Standard Cable Tie Installation Tool
Cable Tie Bag
$45.00
$244.89
$13.95
- Cable ties can be used in countless applications
- Provides consistent performance and reliability
- Available in Natural and Black
Part #
08387
08388
08600
08286
10038
10039
Style
Natural
Black
Natural
Black
Natural
Black
Length
7.5”
7.5”
11”
11”
14.5”
14.5”
Bundle dia.
1/16”-1 3/4”
1/16”- 1 3/4”
1/16”-3”
1/16”-3”
3/16”-4”
3/16”-4”
Strength
50lbs
50lbs
50lbs
50lbs
120lbs
120lbs
Qty
1000
1000
1000
1000
100
100
Price
$25.00
$25.00
$45.00
$55.00
$98.00
$110.00
Saws
Keyhole Saw
- Blade & handle design provides max. strength.
- Hardened blade with clog free teeth.
- Pointed tip punches thru drywall.
- Blade cuts on both push/pull strokes.
- Ergonomic handle with non-slip grip.
Ergonomic Hacksaw
- Angled handle for easier cutting.
- Blade can easily be adjusted for flush cutting.
- Easy tensioning wing-nut keeps blades tight for straighter cuts.
- Cushioned ergonomic grip for performance and comfort.
- Includes: 12” x 24T bi-metal blade.
35-261
Ergonomic Hacksaw
$15.45
301A
Heavy-Duty Hacksaw
$29.95
311
12” Heavy-Duty Hacksaw
- Over-molded rugged design for heavy-duty use & comfort.
- Fully-adjustable blade tension up to 30,000 psi for longer blade life.
- Alternative 45° blade mounting allows for flush cutting.
- Mounting for most reciprocating saw blades for extra versatility.
- Complete with bi-metal blade.
333A
333-1218
333-1224
333-1232
12” Heavy-Duty Hacksaw
12” Bi-Metal Blade, 18 Teeth per inch
12” Bi-Metal Blade, 24 Teeth per inch
12” Bi-Metal Blade, 32 Teeth per inch
Major Credit Cards Accepted
$24.00
$8.25
$8.25
$8.25
$8.30
Retractable Saw Set
- 6” blade retracts in the handle.
- Quick change blade adds versatility.
- Accepts most 6” saw blades.
- Blades cut on both push/pull.
Heavy-Duty Hacksaw
- Rugged frame provides lightweight rigidity & exceptional control.
- Stores up to nine extra blades.
- Blades can be adjusted for flush cutting & tension to 25,000 psi.
- Includes: 12” x 24T bi-metal blade.
35-260
Keyhole Saw
Retractable Saw Set
$10.95
Electrician’s Jab Saw
- Includes replaceable bi-metal wallboard blade
- Hold all reciprocating & hacksaw blades.
- Ergonomic grip.
35-275
36-088
Electrician’s Jab Saw
Bi-Metal Wallboard Blade
1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com
$17.75
$4.20
93
Levels
Measuring Wheel
Mini Magnetic Bubble Level
Electrician’s Torpedo Level
- Mini torpedo design with handy
- 4 open vial ports for viewing.
- Perfect for pipe & conduit work. “no-dog” attachment for bending.
- 4 earth magnets allow hands- - 3 earth magnets provide superior
holding strength.
free use on metal surfaces.
L107
L77
L97
Electrician’s Torpedo Level
Mini Magnetic Bubble Level
Mini Magnet Laser Level
Mini-Magnet Laser Level
- Laser can work on all planes.
- 3 earth magnets provide superior
holding strength.
$37.25
$34.91
$88.30
Torpedo Level 9”
Measuring Wheels
- 9” aluminum frame with magnetic - MW38: Large wheel ideal for
& v-grooved edges.
uneven terrain.
- White windows provide easy
- MW18: Ideal for real estate or
reading of plumb level & 45° mitre. homeowners. Fits into a briefcase
35-205
MW38
MW18
Torpedo Level 9”
Contractor Measuring Wheel, Feet/Inches in 8ths
Executive Measuring Wheel, Feet/Inches in 8ths
$16.85
$98.00
$50.00
Knives
Cable Knife
- Short blade (1.75”) for strength.
- Cutlery-steel blade for durability.
- No-slip, easy-to-grip handle.
- Cuts various insulation types.
44400-000
KN-6
KN-7
Cable Splicing Knife
The tough cutlery steel blade is
extremely sharp & cuts easily
through many types on insulation.
Cable Knife
Cable Splicing Knife
Ergonomic Cable Splicing Knife
$19.00
$7.75
$8.50
Folding Utility Knife
Utility Knife with Blades
- Retractable 3-position blade for - Quick-change retractable blade
system
safety & convenience.
- No disassembly required
- Blade storage in pop-up holder.
- Packaged with 3 serrated blades. - Built-in pull-line cutter.
0652-11
35-286
35-300
Cable Splicing Knife
The KN-7 is an ergonomically
designed knife for easy to grip
feel. Cutlery-steel blade is sharp &
cuts thru many insulation types.
Utility Knife with Blades
Folding Utility Knife
Hawkbill Knife
Hawkbill Knife
- 2 1/4”, curved, carbon stainless
steel blade locks in position.
- Buyrate® Non-slip Handle
- Brass liners
$6.60
$33.50
$10.25
Comfort Grip Utility Knife
- Retractable knife w/11 positions.
- Quick change blade release.
- Blade storage can hold 3 blades
- Comfort grip for ease of use.
Folding Utility Knife
- Blade safely folds into the handle.
- Quick-change for fast replacement.
- Blade lock adds safely when open
- Rust free steel design for durability.
WK500V Quick Change Comfort Grip Utility Knife
WKFQ4R Folding Utility Knife with Quick Change
Progressive knife and scissors kit
Progressive’s Knife and
Electrician’s Scissors are designed
for cutting cable, telephone wire
and stripping insulation.
PT-K01
TK-400
$11.92
$15.76
Splicer’s Kit
This compact kit contains a special
purpose splicer’s knife, scissor
and leather pouch.
Progressive knife and scissors kit
Splicer’s Kit
$36.50
$24.25
Gloves
High-Dexterity Gloves
Tough, soft and comfortable to wear
Handyman’s Gloves
- Clarino synthetic leather, tough,
soft, & washable
- Elastic wrist keeps debris out.
CLC125
CLC135
CLC145
Boxer Gloves
- Neoprene knuckle & wrist cuff
provides padding.
- Wing wrist strap for perfect fit.
Handyman’s Gloves M, L, or XL
Boxer Gloves M, L, or XL
Tradesman Gloves M, L, or XL
Tradesman Gloves
- Clarino synthetic leather, tough,
& washable.
- Textured palm pads for better grip.
$25.50
$32.50
$32.50
- Resists shrinking, stretching, & hardening.
- Wing closing wrist strap for perfect
adjustments, keeping debris out & easyon/easy-off.
- Stretch fabric for flexibility and fit with padded knuckles.
- Textured palm pads for better grip, extra wear, and added durability.
- Thumb design for flexibility & Lycra side panels for improved dexterity.
- Terry cloth to remove sweat or debris from face.
0358-11XL High-Dexterity Gloves, Mechanics XL
0358-11L High-Dexterity Gloves, Mechanics L
$25.20
$25.20
Connector Crimping Pliers
UR/UR2, UY, UY2, UG Connectors
Each of the pliers to your left are
capable of crimping these connectors.
Shipped in boxes of 100.
Crimping Pliers & Side Cutter
- A special stop behind cut out
prevents damage to connectors.
JIC-891
JIC-21257
11294000
94
Telecom Long Nose Pliers
- Side cutting blades, a crushing
slot, & a thin knurled nose to
facilitate handling of wire.
Connector-Crimper Pliers with Side Cutter
Telecom Long Nose Pliers
Need-L-Lock Crimping Pliers
Datacomtools.com
TM
Need-L-Lock’s
- 4-in-1 tool combines connector
crimper with needle-nose pliers so
you can carry one less tool.
$14.25
$21.45
$16.00
Part #
UR
UR2
UY
UY2
UG
Features
Gel-Filled Polycarbonate
Gel-Filled Polycarbonate RUS Listed
Gel-Filled Polycarbonate
Gel-Filled Polycarbonate RUS Listed
Flame Retardant
AWG
19-26
19-26
22-26
19-26
19-26
$13.25
$11.75
$11.75
$9.95
$19.85
Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply
Pliers
JIC-683
JIC-2288
B-Side Cut Pliers
These pliers are high leverage
for cutting bolts, nails, & many
sizes of wire includes highstrength wire.
JIC-683
JIC-2288
JIC-7858
35-3038
35-036
35-037
35-038
35-039
35-3038, 35-036,
35-037, 35-038, 35-039
High Leverage Cutters
Diagonal Cutting Pliers
Crafted for heavy-duty wire
- Standard-bevel knives.
cutting & made of specially - .03” & .045” skin holes.
forged allow steel designed - Crusher used for multifor strength & cutting ability. purpose wire work.
Long Nose Pliers
- Narrow profile head
designed for working in
tight areas.
- Serrated jaws provide
secure gripping surface.
B-Side Cut Pliers
High Leverage Cutters
Telecom Diagonal Cutting Pliers
8 1/2” Long Nose w/Cutter & SmartGrip™ Handles
6” Long Nose w/Cutter & Dipped Handles
7 3/4” Long Nose w/Cutter and Dipped Handles
8 1/2” Long Nose w/Cutter & Dipped Handles
8 1/2” Long Nose w/Cutter, Stripping holes for 12 & 14 AWG, & Dipped Handles
35-4012, 30-4430
30-5419, 30-5420, 35-5012,
30-5430
Side-Cutting Pliers: SureGrip Handles
- High leverage pivot for less
cutting force.
- Induction hardened teeth for long life.
- Cross-hatched jaws so wires wont slip
when pulled.
35-4012
30-4430
30-5420
35-5012
30-5430
35-3028
35-3029
35-029
35-028
JIC-7858
$15.20
$15.25
$19.95
$34.95
$27.25
$28.45
$33.25
$38.15
35-3028, 35-029, 35-028
$31.20
$37.95
$17.20
$27.05
$17.95
$37.25
$37.75
$31.90
$30.15
Pliers
35-3052
35-052
35-4430
35-5430
Tongue and Groove Pliers
- Chrome vanadium steel for durability.
- Ergonomic handles for comfortable,
all-day use.
9 1/2” Cable Cutter w/SmartGrip Handles
9 1/2” Cable Cutter w/ Dipped Handles
10” Tongue & Groove Pliers w/SmartGrip Handles
10” Tongue & Groove Pliers w/Dipped Handles
$45.25
$43.25
$23.35
$16.20
35-3012, 30-3430, 35-012, 30-430
6” Diagonal-Cutting Pliers
9 1/4” Side-Cutting Pliers
- Chrome vanadium steel for durability. - Drop-forged, high-carbon steel
- High leverage pivot requires less
construction.
cutting force.
- Knife to anvil blades never need
- Knife-to-knife blades for easy cutting.
resharpening.
- Induction hardened teeth for long life. - Cuts hardened wire, bolts, and ACSR.
- Ergonomic handles for comfortable,
all-day use
35-4026
35-4028
35-4029
35-5028
35-5029
35-3012
30-3430
35-012
6” Diagonal-Cutting Pliers w/SmartGrip
8” Diagonal-Cutting Pliers w/SmartGrip
8” Diagonal-Cutting Pliers w/Angled Head & SureGrip
8” Diagonal-Cutting Pliers w/Dipped Handles
8” Diagonal-Cutting Pliers w/Angled Head, & Dipped Handles
Side-Cutting Pliers w/Crimping Die & SmartGrip
Side-Cutting Pliers w/Fish Tape Puller & SmartGrip
Side-Cutting Pliers w/Fish Tape Puller & Dipped
$20.25
$25.25
$26.00
$20.15
$20.85
$41.25
$55.90
$29.90
Surge Multitool
0151-09M, 0151-08M
High-Leverage Side Cutter
- Rugged riveted construction
for smooth precise action.
- Custom grip allows area for
user identification.
- Wider grip provides larger
load bearing area.
0151-09M
0151-08M
0251-08M
0251-07M
0251-06M
0251-05M
0351-08M
0351-07M
0351-06M
0451-12M
0451-10M
35-4430, 35-5430
Cable Cutters
- High-carbon steel construction.
- Precision-ground, hardened cutting
edges provide accurate cuts without
cable distortion.
- Designed for maximum leverage with
minimum effort.
- Cuts 2/0 copper & 4/0 aluminum
35-4026, 35-4028, 35-4029,
35-5026, 35-5028, 35-5029
Side-Cutting Pliers: Dippled Handles Diagonal-Cutting Pliers
- High leverage pivot for less cutting
- Knife-to-anvil blades never need
force.
resharpening.
- Induction hardened teeth for long life. - High-leverage provides 40% more
- Cross-hatched jaws so wires wont slip cutting power.
when pulled.
9 1/4” Side-Cutting Pliers w/SureGrip Handles
9 1/4” Side Cutting Pliers w/Crimp, Fish Tape Puller, & SureGrip Handles
8” Side-Cutting Pliers w/Dipped Handles
9 1/4” Side-Cutting Pliers w/Dipped Handles
9 1/4” Side-Cutting Pliers w/Crimp, Fish Tape Puller, & Dipped Handles
8 in. High-Leverage Diagonal Cutting Pliers w/SmartGrip Handles
8 in. High-Leverage Diagonal Cutting Pliers w/Angled Head & SmartGrip Handles
8 in. High-Leverage Diagonal Cutting Pliers w/Dipped Handles
8 in. High-Leverage Diagonal Cutting Pliers w/Angled Head & Dipped Handles
35-3052, 35-052
0251-08M, 0251-07M,
0251-06M, 0251-05M
Diagonal Cutting Pliers
- Effectively cuts most
hardened wire, ACSR, bolts,
screws & nails.
- Exceeds ASME/ANSI specs.
- Rugged riveted construction
for precise action.
0351-08M, 0351-07M,
0351-06M
Long Nose/Side Cutters
- Diamond serrated jaws &
hardened cutting edges for
cutting & gripping.
- Through-hardened steel for
long life.
High-Leverage Side-Cutting Pliers 9”
High Leverage Side-cutting Pliers 8”
High-Leverage Diagonal Cutting Pliers 8”
High-Leverage Diagonal Cutting Pliers 7”
Diagonal Cutting Pliers 6”
Diagonal Cutting Pliers 5” Mini
Long Nose & Side Cutting Pliers 8”
Long Nose & Side Cutting Pliers 7”
Long Nose & Side Cutting Pliers 6”
Pump Pliers 12” Molded Grip
Pump Pliers 10” Molded Grip
Major Credit Cards Accepted
Surge “Awarded Best of the Test by Field &
Stream magazine “ is a multi-tool built with
tough new pliers, longer blades and easy to
use locks. A unique blade exchange comes
with saw and diamond wood file blades.
Large and small bit drivers include double
ended bits. And 4 outside opening blades
give you quick access to the tools you use
most. With these new features, plus the
strongest scissors yet, Surge is sure to make
a splash at the work site.
0451-12M, 0451-10M
Pump Pliers
- Riveted process ensures
joint integrity.
- Right-angled teeth for
gripping in both directions.
- Exceeds ASME/ANSI specs.
$30.35
$28.35
$25.95
$16.70
$18.25
$17.30
$25.10
$18.25
$18.25
$24.75
$20.05
- Leather Sheath Included
- Protected by a 25-Year Warranty
Features:
- Needlenose Pliers
- Regular Pliers
- Wire Cutters
- Hand Wire Cutters
- Stranded Wire Cutters
- Electrical Crimper
830158
- Clip point Knife
- Serrated Knife
- Blade ex-changer
- Scissors
- Large Bit Driver
- Small Bit Driver
- 5/16” ScrewDriver
- Awl with Thread Loop
- Ruler (9 in. / 22 cm)
- Bottle / Can Opener
- Wire Stripper
- Lanyard Ring
Surge Extra Large Multitool
1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com
$89.85
95
Multi-Tools
Skeletool Full Size Multitool
Features: Pliers, Hard-wire
cutters, Tungsten coating, Serrated Blade, Universal Bit Driver,
Carabiner opener, Removable
clip, Storage in handle.
830850
830016
830023
830030
Kick Full Size Multitool
Features: Needle-nose &
Regular pliers, Wire cutters,
Clip point knife, Large, Small,
& Phillips screwdriver, Ruler,
Bottle/can opener, & Wire
Stripper.
Fuse Full Size Multitool
Features: Pliers, Wire cutters, Clip point knife, Large,
Small, & Phillips Screwdriver, Scissors, Bottle/can
opener, Wire Stripper, &
Lanyard ring.
Skeletool CX Full Size Multitool
Kick Full Size Multitool
Fuse Full Size Multitool
Blast Full Size Multitool
$68.00
$29.50
$39.11
$49.45
Charge TTi Multitool
The Charge AL and ALX were just too
hard to beat, so we didn’t even try, we
simply combine them. The Charge TTi
features a cutting hook, scissors, bit
drivers, crimpers and more. But we
had to give the TTi its own claim to
fame. That’s where the handles and
the S30V steel clip point knife come
in. Grab a hold of one today and you’ll
quickly see why the Charge models
are the best of our Multi Tools.
- Titanium Handles
- Needle nose Pliers
- Regular Pliers
- Wire Cutters
- Hand Wire Cutters
- Crimper
- S30V Clip point Knife
- Serrated Knife
830682
Blast Full Size Multitool
Features: Pliers, Hard-wire
cutters, Clip-point knife,
Wood/metal file, Saw, Scissors, Large, Small, & Phillips
screwdriver, Bottle/Can
opener, & Wire stripper.
Charge TTI Multitool
830037
68010101K
JUICE CS4
JUICE XE6
JUICE S2
JUICE C2
$129.85
Crunch Full Size Multitool
Features: Locking pliers, Wire cutters,
Hand wire cutters, Serrated knife,
Wood/metal file, Small screwdriver,
Medium screwdriver, Large screwdriver,
Hex bit driver, Ruler, Bottle opener, &
Wire stripper.
Wave Full Size Multitool
Crunch Full Size Multitool
Juice Cs4 Multitool
Juice Xe6 Multitool
Features: Needle Nose Pliers,
Features: Pliers, Straight
Regular Pliers, Straight Knife,
knife, Wire cutters, ExtraSaw, Wire Cutters, Hard-wire Cut- small, Large, & Phillips
ters, Extra-small Screw Driver,
screwdriver, Bottle/can
Med/Lrg Screw Driver, Phillips opener, Lanyard Ring, Saw,
Screw Driver, Bottle/Can Opener, Hard-wire cutters, Small
Lanyard Ring, Awl, Scissors,
screwdriver, Diamond
Cork-screw, Cork-screw Assist
coated file, Wood/metal file,
Awl, Scissors, Cork-screw, &
Cork-screw assist.
- Ruler (8 in. / 19 cm)
- Bottle / Can Opener
- Wire Stripper
- 8 Double-ended bits
- Fixed Lanyard Ring
- Quick-release Lanyard Ring
- Pocket Clip (add on)
- Cutting Hook
- Saw
- Wood / Metal File
- Diamond-coated File
- Scissors
- Large Bit Driver
- Small Bit Driver
- Larger Screw driver
Wave Full Size Multitool
Features: Pliers, Wire cutters, Hand
wire cutters, Clip-point knife, Serrated
knife, Wood/metal file, Diamond file,
Large bit driver, Small bit driver, Saw, &
Wire stripper.
$79.85
$88.35
Juice S2 Multitool
Features: Needle-nose
pliers, Regular pliers,
Straight knife, Wire cutters,
Extra-small screwdriver,
Large screwdriver, Phillips
screwdriver, Bottle/can opener, Lanyard ring, Hard-wire
cutters, Small screwdriver, &
scissors.
Juice C2 Multitool
Features: Needle-nose
pliers, Regular pliers,
Straight knife, Wire cutters,
Extra-small screwdriver,
Large screwdriver, Phillips
screwdriver, Bottle/can opener, Lanyard ring, Hand-wire
cutters, Small screwdriver,
Cork-screw, & Cork screw
assist.
Juice Cs4 Multitool
Juice Xe6 Multitool
Juice S2 Multitool
Juice C2 Multitool
$66.35
$81.25
$52.50
$52.50
Powerplay Multitools
30
TOOLS
PT-540
Powerplay PT-540 Multitool
Features: Pliers, 110/66 PDT, UTP &
wire stripper, Ex-large Cutters, Drywall
punch & saw, Hard wire cutter notch,
24-18 & 18-14 AWG lug crimpers, 7
wire strippers, wire hook & spudger,
#4 & #6 slotted & #1 Phillips
screwdriver, SOG knife, 3-in-1 file/
bottle opener, 7/16 & 3/8” nutdrivers,
ruler & lanyard.
Powerplay 30 Tool Multitool
$124.95
24
TOOLS
PT-525
Powerplay PT-525 Multitool
Features: Needle-nose & gripping
pliers, 110/66 punchdown tools,
romex wire cutter, UTP stripper, Drywall
punch & saw, #4 & #6 screwdriver, #1
Phillips screwdriver, 1/4” square drive
hex bit adapter, SOG serrated knife, 6
wire strippers, 3-in-1 file, Wire hook &
spudger, Bottle opener, & Ruler
Powerplay 23 Tool Multitool
PowerBlade Multi Purpose Knife
$88.25
.150-.250” cable strippers
12 Tools-in-One! Electrician’s knife and 11 separate strippers for wire and cable. Features
patent pending wire and cable stripping system.
- SOG® Beveled-Edge Knife
- Thumb Stud for One-Handed Opening
- Liner Lock Blade Release
- Comfort Grips
- .150” - .250” Cable Strippers
- 22-10 AWG Wire Strippers
- UTP Stripper
- Limited Lifetime Warranty
6575
96
Datacomtools.com
TM
Powerblade Multitool Knife
22-10 AWG
wire
strippers
- Cryogenic Heat Treated Blade Increases
Strength to Enable Longer Sharpness and
Chip Resistance
- Manufactured from AUS 8 Stainless Steel
- Lightweight Tool Handle Made from Military
Grade Zytel Plastic
- Liner Lock Blade Release System Keeps
Knife Securely Locked While In-Use Position
for Added Safety
$58.95
PowerBlade Handle
Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply
Pro-Tool Bits
Bit, D’VERSITBIT
Bit-Spade-SF Corded
Bit, Auger
Bit, Naileater
Bit, D’VERSIBIT
09-03-54A
Bit, D’VERSITBIT .562” x .187” x 54”
12-04-54A
Bit D’VERSITBIT .750” x .250’ x 54”
12-04-72A
Bit, D’VERSIBIT .750 x .250 x 72”
Bit-Spade-SF Corded
34A-1
Bit-Spade-SF Corded (1”) Pop
34A-1/2
Bit-Spade-SF Corded (1/2”) Pop
34A-3/4
Bit-Spade-SF Corded (3/4”) Pop
34A-3/8
Bit-Spade-SF Corded (3/8”) Pop
34A-5/8
Bit-Spade-SF Corded (5/8”) Pop
34A-7/8
Bit-Spade-SF Corded (7/8”) Pop
34AR-6
Bit-Spade-SF Corded (6pc Kit)
Bit Auger
60A-1
Bit, Auger Quick Change (1A(POP)
60A-3/4
Bit, Auger Quick Change 3/2A (Pop)
60A-5/8
Bit, Auger, Quick Change 5/8A (Pop)
60A-7/8
Bit, Auger Quick Change 60A-7/8
63RT-1
Bit, Auger RT 1” 8-5/8” (Pop)
63RT-7/8
Bit, Auger RT 7/8”
Bit, Naileater
62PTS-1
Bit, Naileater 1” x 7.62”
62PTS-3/4
Bit, Naileater 3/4”
62PTS-7/8
Bit, Naileater 7/8”
66RT-1
Bit, Naileater 1” x 18”
66PT-3/4
Bit, Naileater 3/4” x 18”
Drill/Tap
39873
Drill, Pilot
39893
Drill-Pilot .250” x 3” 25LG
625-001
Drill, Packaged
645-001
Drill, Packaged
925-001
Drill PKG, small pilot-HSS
DDKIT-1-68
Drill Driver Bit Kit (Pop)
DTAP1/4-20
Drill/Tap 1/4-20
DTAP10-32
Drill/Tap, 10-32
DTAP6-32
Drill/Tap, 6-32
DTAP8-32
Drill/Tap, 8-32
DTAPKIT
Drill-Tap Kit
Holesaw, Variable Pitch
$65.54
$68.64
$72.58
$6.09
$5.00
$5.54
$4.98
$5.28
$5.82
$21.50
$9.32
$4.24
$4.70
$8.11
$43.70
$38.12
$33.62
$25.97
$29.33
$45.92
$35.40
$5.06
$4.81
$4.99
$15.32
$7.49
$59.99
$8.04
$8.04
$8.04
$7.80
$27.75
Drill/Tap
Cutters
Extention
Holesaws
825-1-1/8
825-1-3/4
825-1-3/8
825-2
825-2-1/2
825-3
825-3/4
825-3-5/8
825-4-1/2
825-4-1/8
825-7/8
35713
38504
38506
38507
Holesaw, Variable Pitch
Holesaw, Variable Pitch
Holesaw, Variable Pitch
Holesaw, Variable Pitch
Holesaw, Variable Pitch
Holesaw, Variable Pitch
Holesaw, Variable Pitch
Holesaw, Variable Pitch
Holesaw, Variable Pitch
Holesaw, Variable Pitch
Holesaw, Variable Pitch
Holesaw, Light 6-3/8” Steel Tooth
Arbor-Holesaw 3/8” Shank W/3 FLA
Arbor, Holesaaw 1/2” Shank W/3 FLA
Arbor, Holesaw-small
$10.87
$14.05
$11.57
$14.05
$19.07
$19.69
$10.32
$21.90
$56.90
$29.98
$10.32
$63.10
$21.73
$26.14
$11.41
Cutters
625-1-1/8
625-1-3/8
625-7/8
635
645-011
645-1-1/8
925-1-1/8
925-7/8
930
Cutter Hole-CARBD 1.125”
Cutter, Hole-CARBD 1.375”
Cutter, Hole-CARBIDE .875”
Cutter Kit, Hole-Carbide
Arbor, Carbide Cutter Shank
Cutter, Carbide 1-1/8”
Cutter PKG, HSS 1.125”
Cutter PKG, HSS 0.875”
Cutter Kit, HSS
$28.99
$33.99
$24.99
$2750.00
$73.86
$52.58
$26.81
$24.65
$15.80
Extension Bit
901-12
902-18
904H-12
904H-18
941
DBITKIT
Extension, Bit
Extension, Bit-Power
Extension Bit (7/16” x 12”)
Extension, Bit (7/16” x 18”)
Quick Change D’VERSIBIT System K
D’VERSIBIT Kit-Type “B” Auger
$15.48
$33.36
$52.39
$52.39
$941.00
$88.50
Saw Blades
LSC-M13C
Blade, Metal Circ Saw 5-3/8”
$42.00
Masonry Bit Kits
SDS-SET-5
Masonry Bit Kit, SDS Plus
$47.90
Hole Saws and Kits
Can Light Hole Saw
Electrician’s Step Bit Kit
- Competitively priced
- Drill not included
- Cuts drywall & ceiling tile.
- Self-Sharpening carbide coating blade.
- Includes 2 shields to minimize cleaning.
35-598 Can Hole Saw 2 1/2”-7”
$33.20
35-599 Can Hole Saw 6 1/4”-10 3/8” $27.85
Electrician’s Hole Saw Kit
- Durable case securely
protects bits.
- Kit includes four step bits: (35-511, 35-513,
35-515, & 35-517)
- Solutions for sizes between: 1/8” & 1 3/8”.
35-520 Electrician’s Step Bit Kit
Major Credit Cards Accepted
$162.35
- Generous 14-piece kit offers a
tremendous selection.
- Contains electrical sizes for pipe
and conduit through 4”.
- Plastic case survives extra wear
& tear.
35-401 Includes:
Hole Saw Sizes:
7/8”, 1 1/8”, 1 3/8”, 1 3/4”, 2”,
2 1/2”, 3”, 3 5/8”, 4 1/8”, 4 1/2”
Arbor Models:
35-391, 35-394, 35-393
35-401
35-400
35-400 Includes:
Hole Saw Sizes:
7/8”, 1 1/8”, 1 3/8”, 1 3/4”, 2”,
2 1/2”
Arbor Models:
35-391, 35-393
Master Electrician’s Hole Saw Kit
Electrician’s Hole Saw Kit
1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com
$200.55
$94.25
97
Electrician’s Pivoting Drill/Driver
This screwdriver can be used to drive a wide variety of screws and to drill small diameter
holes. To fit a variety of situations, it can be used as a straight tool or as a pistol style tool. It
has 21 clutch stages to precisely provide the right torque for almost any screw, and when the clutch setting is
reached, the tool automatically shuts off to save battery and clutch life.
Includes:
- 3.6V Drill/Driver
- (2) 3.6V Lithium-Ion Compact Batteries
- 3.6V Battery Charger
- 2 speed reversible: Low: 200 rpm - High: 600 rpm
- Clutch torque: 2.7 to 25.7 in-lb 21 stages
- Charging time: Usable: 15 minutes - Full: 30 minutes
- Max drill diameter: In metal 13/64”
- Max screw driving: Wood screws 5/32” dia x 1-1/2”
- Powerful maximum torque: 39 in-lb - 13.3 in-lb
- Anti-slip rubber grip to maintain a better grip
LSD-36
Li-Ion Electrician’s Pivoting Drill/Driver
The Greenlee circular saw is designed primarily to cut metal-almost any metal. This includes conduit, strut,
and threaded rod. Plus the blade doesn’t leave burrs, so chasing threads or filing the edges isn’t needed. The
full surround blade guard contains most of the chips, and with its compact size, it will work where larger saws
can’t. It even has a LED work light so you can make straight cuts in dark locations
Metal Cutting Circular Saw
- High capacity battery: 14.4V Li-Ion
- Rotating speed: 3,600 rpm
- Blade size: Outer dia 5-3/8” - Arbor size: 20mm
- Adjustable cutting depth up to 1-13/16”
- Charging time: Usable: 35 minutes - Full: 50 minutes
- Shaft lock for easy blade replacement
- Electronic performance monitoring system
- Electric brake stops the blade instantaneously
LCS-144
Steel
Stainless Steel
Wood
Aluminum
Fiberglass & Plastic
Metal Studs
Drywall & Ceiling Tile
Hardy & Cement Board
Misc.
Masonry Bits
98
Greenlee Products
Combo Drill/Tap Bits
Kwik Stepper Step Bits
Bi-Metal Hole Saws
Bi-Metal Hole Saws
Ultra Cutter
Twist Drill Bits
Drill Saw Bits
Quick Change Stainless Steel Hole Cutters
Carbide-Tipped Hole Cutters
Carbide-Tipped Hole Cutters
Twist Drill Bits
Nail Eater® RT Auger Bit
Nail Eater® Extreme Auger Bit
Kwik Stepper Step Bits
Bi-Metal Hole Saws
Bi-Metal Hole Saws
Self-Feeding Spade Bits
Recessed Light Hole Saws
D’VersiBIT® System
Stubby Auger Wood Bits
Long Auger Wood Bits
Twist Drill Bits
Drill Saw Bits
Installer Bits
Combination Drill/Tap bits
Kwik Stepper Step Bits
Bi-Metal Hole Saws
Bi-Metal Hole Saws
Bi-Metal Hole Saws
Bi-Metal Hole Saws
Kwik Stepper Step Bits
Carbide-Grit Hole Saws
Twist Drill Bits
Installer Bits
Ultra Cutter
Twist Drill Bits
Installer Bits
Self-Feeding Spade Bits
Recessed Light Hole Saws
Quick Cutter Hole Saws
Twist Drill Bits
Drilll Saw Bits
Installer Bits
Carbide-Grit Hole Saws
Twist Drill Bits
Installer Bits
Glass/Tile Bits
1/4 SDS Bit
1/5” SDS Plus Bit
Hex Drill Bit
Datacomtools.com
$179.00
TM
Includes:
- 14.4V Cutting Circular Saw w/LCS-M13C Metal Blade
- 14.4V Lithium Compact Batteries
- 14.4V-28.8V Battery Charger
- Carrying Case
Electrician’s Metal Cutting Circular Saw
Size Range
ALL
1/8” to 1-3/8”
9/16” to 7/8”
9/16” to 6”
7/8” to 2-1/2”
1/16” to 1/2”
1/8” to 1/2”
5//8” to 2”
3/4” to 1-1/2”
1-3/4” to 2-1/2”
1-3/4” to 1/2”
7/8” to 1”
5/8” to 1-1/4”
1/8” to 1-3/8”
9/16” to 7/8”
9/16” to 6”
3/8” to 1”
4-3/8” to 6-7/8”
3/16” to 1”
5/8” to 1”
11/16” to 15/16”
1/16” to 1/2”
1/8” to 1/2”
3/16” to 3/4”
ALL
1/8” to 1-3/8”
9/16” to 7/8”
9/16” to 6”
9/16” to 7/8”
9/16” to 6”
1/8” to 1-3/8”
7/8” to 4-1/2”
1/16” to 1/2”
3/16” to 3/4”
7/8” to 2-1/2”
1/16” to 1/2”
3/16” to 3/4”
3/8” to 1”
4-3/8” to 6-7/8”
2-1/2” to 7”
1/16” to 1/2”
1/8” to 1/2”
3/16” to 3/4”
7/8” to 4-1/2”
1/16” to 1/2”
3/16” to 3/4”
1/8” to 1/2”
3/16” to 3/4”
5/32” to 3/4”
3/16” to 3/4”
LSD-36
•
$435.00
LDD-144
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
LDD-216
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
LHD-216
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply
1/2” Li-Ion Electrician’s Drill/Driver
This drill/driver is easy to carry around & easy to fit into tight spaces. Yet, with its 14.4V Li-Ion
battery, it has enough power to drive Greenlee’s top performing Self-Feeding Spade bits, up
to 42 holes in 1-1/12” wood w/ 7/8” bit. It can be set to drive about any screw properly.
Includes:
- 14.4V Drill/Driver
- (2) 14.4V Lithium-Ion Compact Batteries
- 14.4V-28.8V Battery Charger
- High Power: 390 in-lb
- Variable speed/reversible: 60-400rpm - 200-1350rpm
- Clutch torque: 4.4 to 39.0 in-lb, 18 stages
- 1/2” Heavy-duty keyless chuck
- Charging time: Usable 35 minutes - Full: 50 minute
- Electronic trigger provides longer life
- Electronic performance monitoring system
LDD-144
LDS-144
1/2” Li-Ion Electrician’s Drill/Driver
Additional products included with combo kit:
- LCS-144 Metal Cutting Circular Saw
- Heavy-Duty Multi-Pocket Bag
1/2” Li-Ion Electrician’s Drill/Driver with belt hook
Combo Kit
This drill/driver is a rugged workhorse of day after day heavy-duty drilling, yet at 5.4 pounds it is one of the
lightest drills in its class. The high capacity 21.6V LI-ION battery delivers plenty of power to drill up to 139
holes 3/4” diameter in 1-1/2” wood. Features an 18 stage clutch so you can drive screws to the right torque.
- High Power: 575in-lb
- Variable speed/reversible: 100-400rpm - 350-1500 rpm
- Clutch torque: 8.8 to 61 in-lb, 18 stages
- 1/2” Heavy-duty keyless chuck
- Charging time: Usable: 45 minutes - Full: 60 minutes
- Electronic trigger provides longer life
- 360º side handle for better leverage
LDD-216
LHD-216
1/2” Rotary Hammer Drill/Driver
Includes:
- 21.6V Drill/Driver
- (2) 21.6v Lithium-Ion Compact Batteries
- 14.4V - 28.8V Battery Charger
- Carrying Case
1/2” Li-Ion Electrician’s Drill/Driver
1/2” Li-Ion Electrician’s Hammer Drill/Driver
$395.00
$427.95
With this one tool, you can do a complete concrete anchor installation. In the hammer mode, you can use a
SDS masonry bit to drill the anchor hole. Then you can chance to the drilling mode and use the included bit
adapter to drive the screw into the anchor. Plus the LRH-144 had 5 clutch settings so you can use just the
right amount of torque for the screw. The 14.4V Li-Ion battery provides plenty of power to drill up to 12 holes of
1/2” diameter x 1-1/2” deep in concrete.
- High capacity battery: 14.4V Li-Ion
- Hammering Force: 21.6 kN
- Blow rate per minute: 0-3,800 bpm
- Speed at no-load: 01,000 rpm
- Clutch torque: 13 to 48.7 in-lb
- 3/4” SDS-plus bit system
- Ergonomic soft rubber grip for stress reduction
- Electronic performance monitoring system
- Charging time: Usable: 35 minutes - Full: 50 minutes
LRH-144
3/4” SDS-plus Rotary Hammer
$295.00
$539.00
Includes:
- 14.4V Rotary Hammer Drill/Driver
- (2) 14.4V Lithium-Ion Compact Batteries
- 14.4V-28.8V Battery Charger
- Carrying Case
- Shoulder Strap
- Bit Adapter
Electrician’s 1/2” SDS-plus Rotary Hammer Drill/Driver
$530.00
This is one tough rotary hammer. With its magnesium gear case housing that provides excellent heat dispersal
and its cooling fan diameter holes in concrete continuously. Also, the large cooling fan provides enough air
flow to prevent tool-killing dust buildup, and the two-finger trigger is sealed to prevent dust entry. Use the
Soft hammer selection for holes up to 3/16” diameter and the hard hammer selection for holes from 3/16”
through 3/4” diameter.
- High capacity battery: 28.8V Li-ion
- Hammering force: 5,300 IbF
- Two speed hammering selection: High: 0-4,500 bpm
- Low: 0-2,800 bpm
- Variable speed/reversible: 0-920rpm - 0-500rpm
- 1” SDS-plus bit system
- Electronic performance monitoring system
- Charging time: Usable: 55 minutes - Full: 70 minutes.
- Dust-proof switch ensures long life
LRH-288
Major Credit Cards Accepted
Includes:
- 28.8V Rotary Hammer
- (2) 28.8V Lithium-Ion Compact Batteries
- 14.4V-28.8V Battery Charger
- Carrying Case
- Shoulder Strap
Electrician’s 3/4” SDS-plus Rotary Hammer
1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com
$775.00
99
Datacomtools.com
The Web’s Best Source for Telecom Tools and Testers
79 Harborview Avenue, Stamford CT 06902
The Right Tool for the Job.
The Right Battery for the Tool
LITHIUM-ION POWER TOOLS
Electrician trusted for nearly 150 years, Greenlee is proud to introduce its new line of top-performing Lithium-Ion power
tools. Professional, versatile and lightweight, these tools are the perfect companion to our industry leading holemaking
and power tool accessory products. With this winning combination you will achieve optimum performance on the job, day
in and day out.
When it comes to making holes on the jobsite, electrical contractors reach for Greenlee’s power tool accessories to get
the job done – whether it be our Nail Eater® Auger Bits, Drill/Tap Bits, Kwik Stepper® Bits, Spade Bits, D’Versibit® System or our QuickChange Hole Saws.
Now you can get optimum performance from our already highly-reputable holemaking and power tool accessories with Greenlee’s new line of battery power
tools. These power tools are compact, lightweight and cordless, yet powerful, heavy-duty and ergonomically-designed for working in tight spaces like panel boxes.
Our power tools are powered by second-generation Cobalt Lithium-Ion batteries, which provide lower internal resistance than traditional Lithium-Ion batteries
and store more amp hours than most of the competitors’ batteries – meaning more work can be done with one charge.
So now is the time to get your hands on Greenlee! Choose from our 3.6V screwdriver; 14.4V drill/driver, circular saw or rotary hammer drill/driver; 21.6V drill/
driver and hammer drill/driver; or the very strong 28.8V heavy-duty rotary hammer. Each tool is powered with the proper voltage to meet the tool’s requirements,
which gives electrical contractors the right amount of power and flexibility for just about any jobsite application.
3.6v
Lithium-Ion
LSD-36
LDD-144
LDS-144
LDD-216
LHD-216
LRH-144
LRH-288
LSD-36
LCS-144
14.4v
Lithium-Ion
LDD-144
21.6v
14.4v
28.8v
LDD-216
LRH-144
LRH-288
Lithium-Ion
1/2” Li-Ion Electrician’s Drill/Driver with belt hook
Combo Kit
1/2” Li-Ion Electrician’s Drill/Driver
1/2” Li-Ion Electrician’s Hammer Drill/Driver
Electrician’s 1/2” SDS-plus Rotary Hammer Drill/Driver
Electrician’s 3/4” SDS-plus Rotary Hammer
Li-Ion Electrician’s Pivoting Drill/Driver
Electrician’s Metal Cutting Circular Saw
$295.00
$539.00
$395.00
$427.95
$530.00
$775.00
$179.00
$435.00
Lithium-Ion
Lithium-Ion
Bits and adapters for PROVL
Powertools are available
Visit www.datacomtools.com/provl for details.
Visit WWW.DATACOMTOOLS.COM/PROVL