Download User`s Manual Premio 15 - TAG

PRODUCT RANGE
USER’S MANUAL
Example of 1 Premio/8” equipped with
1 UHF receiver and 1 USB/SD/MMC
Card player.
Example of 1 Premio/12” equipped with
1 UHF receiver and 1 CD player.
Techniques Audio Groupe
Route de Lavérune
Montée du Terral
34430 Saint Jean de Védas
France
Tel : +33 (0)4 67 27 43 05
Fax : +33 (0)4 67 27 85 64
[email protected]
www.tag-fr.com
SUMMARY
INTRODUCTION
INTRODUCTION
Page 03
ADVICE FOR A GOOD USE
Page 03
BASIC EQUIPMENT
Page 04
- LOUDSPEAKER
Page 04
- POWER ON/OF SWITCH
Page 04
- MIC/LINE INPUTS
Page 04
- 3 BANDS EQ
Page 04
- LINE OUTPUT AND OUTPUT SPEAKER
Page 05
- POWER SUPPLY OUTPUT
Page 05
- BATTERY AND CONTROL LEDS
Page 05
OPTIONS PREMIO/8”
Page 05
- RECEIVER MODULES R-300M and SDR-500M
Page 06
- PLAYER T-EMSU12
Page 06
OPTIONS PREMIO/12” and 15”
Page 09
- RECEIVER MODULES R-300M, SDR-500M, SDR-6216M
Page 09
- PLAYER CD-458/HUR
Page 09
ACCESSORIES PREMIO RANGE
Page 13
- HANDHELD TRANSMITTERS
Page 13
- BELTPACK TRANSMITTERS
Page 15
- TRIPOD STANDS
Page 19
TECHNICAL DATA
2
PREMIO RANGE User’s Manual
Thank you for choosing a model of our product range PREMIO. To ensure the best performance
and get the maximum life out of the equipment, we recommend that you read this manual carefully.
The product range PREMIO combines cabinets (70 W RMS) which are suitable for both indoor and
outdoor applications like conferences, seminars or religious ceremonies, exhibitions, aerobics, shopping centre presentations... The built-in battery which offers upt to 6 hours continuous use.
Theses compact PA systems are lightweight, easy to use and deliver clear and powerful sound.
Options would be wireless receiver, transmitter, digital player or CD player.
ADVICE FOR A GOOD USE
3 Charge the sound system before use.
3 Do not use the sound system in a humid or dusty place, or near any heat sources such as radiators, heat registers, neither under the sun or at very low temperatures.
3 Place the sound system in a ventilated place.
3 Be careful when moving this unit in order not to damage the electronics.
3 Carry the sound system with caution.
3 Do not forget to decrease the volume switch before turning off the sound system.
3 Handle the control switches carefully.
3 Clean the sound system regularly.
3 Keep the carton in case of return.Transport will be safe and without any risk of damage.
The exclamation point inside an equilateral triangle indicates the existence of internal
components whose substitution may effect safety. Also indicates important operating
instructions.
The lightning and arrowhead symbol warns about the presence of uninsulated dangerours voltage. To reduce the risk of electric shock, do not remove the cover. Refer servicing to qualified personnel.
Page 20
PREMIO RANGE User’s Manual
3
BASIC EQUIPMENT
LOUDSPEAKER
Premio8”: The sound system is equipped with one loudspeaker:
70 Watt RMS/ 4 ohms
1 woofer 8” - 20 cm
1 compression driver 1”
LINE OUTPUT
The XLR connector allows for wire connection with active speakers.
SPEAK OUTPUT
The 4 pole Speakon plug allows for wire connection with the passive speaker Premio/P.
Premio12”: The sound system is equipped with one loudspeaker:
70 Watt RMS/ 4 ohms
1 woofer 12” - 31 cm
1 compression driver 1”
POWER SUPPLY INPUT
110-240 Volts power supply input. Allows working on AC main and battery loading of
PREMIO. It is recommended to use the provided cable for recharge.
Premio15”: The sound system is equipped with one loudspeaker:
70 Watt RMS/ 4 ohms
1 woofer 15” - 38 cm
1 compression driver 1”
BATTERY
The sound system Premio8” is equipped with one 2.3 Ah - 12 V lead battery and Premio12” and
Premio with one 9Ah - 12 V lead battery making lots of loadings and unloadings possible. When
connected on AC main the sound system can work without time limit, while charging.
Premio 8”: Minimum autonomy: 2 hours, maximum: 3 hours.
Premio 12” and Premio15”: Minimum autonomy: 3 hours, maximum: 6 hours.
ON/OFF BUTTON
Use this button to switch on/off the device.
1 MIC INPUT and 1 LINE INPUT
The cabinet is equipped with 1 Jack mic input, 1 RCA line input with volume
control. The input selection is automatic.
If both inputs are connected, you can use them simultaneously.
L
CAUTION : MIC Adjustment
To avoid the larsen effect when you switch on MICs, do not turn the gain up if you are
not far from the speaker. We strongly recommend that you switch off the MIC, adjust
the volume of the speaker to the desired volume , then be a few meters away before
switching on the MIC again.
CONTROL LEDS
3 GREEN LED "ON":
- The equipment is ready to work
- The battery is loaded
3 YELLOW LED "CHARGER":
- The charger is loading.
- The internal automatic charger will increase battery tension up to its highest level +/- 13 V.
L
CAUTION: BATTERY LOADING
NEVER STOCK THE EQUIPMENT WITHOUT HAVING RELOADED IT. It is recommended to switch off the equipment while loading to ensure a full battery recharge.
TONE ADJUSTMENTS
The cabinet is equipped with 3 highly performing tone adjustments.
1 bass frequency tone control on 100 Hz with +/- 12 dB efficiency.
1 mid frequency tone control on 1000 Hz with +/- 12 dB efficiency.
1 treble frequency tone control on 10000 Hz with +/- 12 dB efficiency.
4
PREMIO RANGE User’s Manual
PREMIO RANGE User’s Manual
5
OPTIONS PREMIO/8”
WIRELESS SYSTEM VHF OR UHF
The cabinet can be equipped with one wireless system. It can be chosen between a VHF single frequency receiver or a UHF 16 frequency receiver. The receiver is built in the inferior part.
DIGITAL PLAYER
Premio/8” can be equipped with one USB/MP3 and MMC Card player which can read MP3 and
WMA format.
Technical caracteristics of receiver R-300M
VHF receiver, Non Diversity
3 Volume button:
Separate volume control for the wireless system.
3 Switch on the handheld microphone/beltpack transmitter:
The LED is lightning when the VHF link between transmitter and receiver is ok.
Technical caracteristics of receiver SDR-500M
UHF receiver, Non Diversity, with Pilotone.
3 Volume button:
Seperate volume control for the wireless system.
3 Switch on the handheld microphone/beltpack transmitter:
The LED is lightning when the UHF link between transmitter and receiver is ok.
Channel can be changed with the switch located under the volume control.
6
PREMIO RANGE User’s Manual
Key
Explanation
PLAY/
PAUSE
Starts/ Pauses playback
USB / SD
Press this button to select USB or SD Card
Repeat
Repeating function.
- Press once, LCD shows “ONE“, repeat current track.
- Press twice, LCD shows “ALL”, repeat all tracks.
- Press 3 times, the function back to “repeat current track”
PREV/
V-
Press this button to get back to last track. Press over 3 seconds to
decrease the volume.
NEXT
V+
Press this button to select next track, press over 3 seconds to increase
the volume.
Mute
Mute: to cancel Mute press this button again.
R
Infrared window, receives signal from the remote controller.
PREMIO RANGE User’s Manual
Front cover
of the player
7
OPTIONS PREMIO/12” AND PREMIO/15”
Key
Explanation
POWER
Power. Press to turn on and off.
MODE
Changes mode, selects USB or SD Card
BACKWARD
Press this button to get back to last track. Press over 3 seconds to go
back to the first track of previous folder.
FORWARD Press this button to select next track. Press over 3 seconds to select the
first track of next folder.
EQ
VOL-
VOL+
RPT
0-9
USB/SD mode, press this button to select sound quality. From E1 ~ E,
total 6 selections. E1: Normal / E2: Classic / E3: Bass / E4: Live / E5:
Rock / E6: POP.
Decreases volume, Single and slightly pressed decreases 1 level. Keep
pressing to reduce the volume. LCD shows 0 when minimum volume is
reached.
Increases Volume, Single and slightly pressed increases the volume.
Keep pressing to increase the volume. LCD shows 30 when maximum
volume is reached.
Repeating function.
- Press once, LCD shows “ONE“, repeat current track.
- Press twice, LCD shows “ALL”, repeat all tracks.
- Press 3 times, the function back to “repeat current track”
The keyboard enables to choose the title directly by typing title number
+ Play.
Front cover
of remote
control
WIRELESS SYSTEM VHF OR UHF
The cabinet can be equipped with one wireless system. It can be chosen between a VHF single frequency receiver or a UHF 16 frequency receiver. The receiver is built in the inferior part.
Technical caracteristics of receiver R-300M
VHF receiver, Non Diversity
3 Volume button:
Separate volume control for the wireless system.
3 Switch on the handheld microphone/beltpack transmitter:
The LED is lightning when the VHF link between transmitter and receiver is ok.
Technical caracteristics of receiver SDR-500M
UHF receiver, Non Diversity, with Pilotone.
3 Volume button:
Seperate volume control for the wireless system.
3 Switch on the handheld microphone/beltpack transmitter:
The LED is lightning when the UHF link between transmitter and receiver is ok.
Channel can be changed with the switch located under the volume control.
Technical caracteristics of receiver SDR-6216M
UHF receiver, True Diversity, with Pilotone.
3 Switch on the receiver:
The switch on the right is power switch and volume control
3 Switch on the handheld microphone/beltpack transmitter:
The LEDS A or B are lightning when the UHF link between transmitter and receiver is ok.
Channel can be changed with the switch on the left side.
On/Off + Volume
Selection of the channel
8
PREMIO RANGE User’s Manual
LED A et B
PREMIO RANGE User’s Manual
9
PLAYER: CD-458/HUR
The PREMIO12” and PREMIO15” can be equipped with 1 player CD-458/HUR. The CD player
/MP3/USB/SD Plug is equipped with an antichoc memory making it insensible to use handle and
vibrations.The absence of drawer makes handling CDs in and out secure. It is equipped with Pitch
control.
Keys
PLAY/
PAUSE
Explanation
STOP/
EJECT
If on Stop CD starts playing
If on Play it turns to Pause
If on Pause the CD starts playing again
Stops music or
CD ejection
Pitch
Control
Clockwise to increase music speed and anti clockwise to
decrease music speed.
ESP
Anti choc memory. Lasts 40 seconds
UP/CUE
Skip
Single and slightly pressed skips to next track. If pressed
again a little longer goes forward in the track.
Play mode:
The selected track starts playing
Stop/Pause mode:
Skips to next track.
Program mode:
Skips to next track according to program selection
DOWN/
REV
Skip
Single and slightly pressed skips to previous track. If pressed again a little longer goes to previous track
Play mode:
The selected tracks starts automatically
Stop/Pause mode:
Playing does not start automatically
Program mode:
Skips to previous track according to program selection
Front Panel
Remote
FOLDER Enables to skip to next file
Skip
Stop mode: skips to next file
Program mode : skips to the first track in the next file.
Play mode : skips to the first track in the next file
10
PREMIO RANGE User’s Manual
PREMIO RANGE User’s Manual
11
Keys
Explanations
Front panel
FOLDER Enables to skip to previous file
Skip
Stop mode : skips to previous file
Program mode: skips to first track in previous file
Play mode: skips to first track in previous file
Remote
ACCESSORIES PREMIO RANGE
VHF OR UHF HANDHELD MICROPHONE TRANSMITTER
Corresponding to the wireless system the Microphone has to be a VHF or UHF Microphone
Transmitter.
HANDHELD MICROPHONE TRANSMITTER Q-1002 (VHF)
The microphone is equipped with 1 frequency
REPEAT
"REPEAT" in following range
repeat all random
repeat track
repeat all
play all
random repeat
PROG
Enables to choose the tracks .
To delete this selection press Stop.
MUTE
Mute: to cancel Mute press this button again.
CD
Changes mode and skips to CD-MP3 mode
USB
Changes mode and skips to USB mode
VOL-
Decreases volume by 1 dB
(lowest volume = 0dB)
VOL+
Increases volume by 1 dB
(highest volume 30dB)
FIND
Enables to change the display information (Album or title)
and to choose the right title or file.
0~10
The keyboard enables to choose the title directly by typing
title number + Play.
12
PREMIO RANGE User’s Manual
1. Microphone capsule
2. Battery status - LED indicator
3. Battery compartment
4.Power switch (ON/OFF)
2
3
1
4
Battery Installation
Q-1002 uses 1 piece of 9V battery. To install new or replace the old battery, First unscrew the
battery cap from the battery compartment, then insert the new battery according to its correct
polarity as indicated. For longer operation hour, Alkaline battery is recommended!
After putting the battery cover back to the housing , slide the switch to "ON" position as shown
below.
As soon as the power is on, the battery-status indicator will give flash, indicating a normal operation. If there is no flash, it indicates either power supply is not available or battery is
installed wrongly.
After switching on, the therefore signal indicator LED(s) of matching receiver will light up, indicating the microphone signal transmission is in normal operation.
Switch off the power when the microphone is not in use, meanwhile, remove the battery out of
microphone if it is not to be used for an extended period.
slide to “ON”
position
L
CAUTION: BATTERY
For longer operation hour, Alkaline battery is recommended! Wrong batteries can
damage the microphone functions. Check battery status. Many batteries are known
to have leakage problem of conductive and corrosive liquid. Remove the batteries if
you do not plan to use the microphone for a few days.
PREMIO RANGE User’s Manual
13
HANDHELD MICROPHONE TRANSMITTER SQ-5016 (UHF)
The microphone is equipped with 16 frequencies
L
5016
1. Microphone capsule
2. Battery status led
3. Power switch (ON/OFF)
4. LCD display
5. Battery compartment
6. Rotative protective cap for controls
7. Lock/Unlock
8. Set
9. UP
10.DOWN
11.Charging Port
12.Name plate
CAUTION: BATTERY
For rechargeable batteries we strongly recommend NiMH batteries, no alkanies.
Wrong batteries can damage the microphone functions. Check battery status. Many
batteries are known to have leakage problem of conductive and corrosive liquid.
Remove the batteries if you do not plan to use the microphone for a few days. Also
check that transmitter and receiver are on the same channel.
HC-30 Charger
Handheld microphones and beltpack transmitters can be
reloaded.The charger HC-30 is for the handheld microphone SQ-5016.
Before loading check that the batteries are rechargeable ones.
VHF OR UHF BELT TRANSMITTERS
Microphone settings
Press on Set for 2 seconds to enter into Settings.
1. Making changes to CHANNEL/FREQUENCY
Use UP or DOWN button to go to the Channel/Frequency page. Pressing UP or DOWN button
will increase of decrease the channel number. The corresponding frequency will change accordingly. When a desired channel is being selected, it will automatically be saved and stored in the
memory.
2. Making changes to SENSITIVIY
Use UP or DOWN button to go to the Set page.. Use UP or DOWN to decrease or increase sensitivity. Level: 1 - 4 . for singing, Level 4 for speech or if microphone is used with a stand
3. Making changes to battery selection
Use UP or DOWN to go to the Battery selection page. Press UP or DOWN to move the cursor to
either: NiMH (rechargeable battery) or AKLN (alkaline). When the battery has been selected it is
saved and stored in the memory.
Corresponding to the wireless system the Belt Transmitter has to be a VHF or UHF Transmitter.
BELT TRANSMITTER M-1002 (VHF)
Input level Gain control adjustment
Low-impedance "MT" gain control is situated inside the beltpack transmitter. Gain control port is an
adjustable design that enables user to use microphones of different output levels. To adjust the
audio input levels, simply use a small screw driver to switch the "MT" control till a desired level is
chosen.
Changing Batteries
2 pieces of AA batteries are used. Unscrew the tap of battery compartment and insert the
new batteries. BEWARE OF THE POLARITY
14
PREMIO RANGE User’s Manual
PREMIO RANGE User’s Manual
15
Belt transmitter settings
Press on Set for 2 seconds to enter into Settings.
1. Making changes to CHANNEL / FREQUENCY
Use UP or DOWN button to go to the CHANNEL /FREQUENCY page. The
cursor will flash to allow changes to be made. Pressing UP or DOWN button
will increase or decrease the channel number. The corresponding frequency will change accordingly. When a desired channel(frequency) is being selected, it will be automatically saved and stored in the memory.
Battery Installation
M-1002 uses 1 piece of 9V battery. To install new
or replace the old battery, first open the
battery compartment cover, then insert the
new battery according to its correct polarity as
indicated. For longer operation hour, Alkaline
battery is recommended!
L
Belt Clip
This uniquely designed belt clip allows 360
degree rotation. Select the best position
to achieve optimum wearing comfort.
CAUTION: BATTERY
Many batteries are known to have leakage problem of conductive and corrosive
liquid. Remove the battery if you do not plan to use the belt transmitter for a few
days.
2
3
4
5
6
7
1. Antenna
2. Battery weak indicator
3. Audio mute switch
4. Mini-XLR connector
5. Power ON / OFF switch
6. LCD display
7. Charging port
8. Cover release button
9. Charging contacts
10. Lavalier microphone
11. Mic clip
8
12
9
13
14
12. SET
13. UP
14. DOWN
15. GT
16. MT
15 16
10
11
16
3. Making changes to Battery selection
Use UP or DOWN button to go to the Battery selection page. Press SET for
about 2 seconds to activate the cursor. Press UP or DOWN button to move
the cursor to either NiMH (rechargeable battery) or AKLN (Alkaline battery) position.When the
desired option has been selected, press SET for about 2 seconds to save and store the data in the
memory.
Battery Installation
SM-5016 uses 2 pieces of " AA " size batteries (Alkaline battery is recommended ).
To install or remove the batteries, press the release buttons at the edges of the
transmitter to open or close the
cover as illustrated below.
BELT TRANSMITTER SM-5016 (UHF)
1
2. Input Level Gain Control Adjustment
Low impedance (Lo-Z) " MT" & high impedance (Hi-Z) " GT" gain controls are situated inside the
transmitter. Gain controls are adjustment ports that enable you touse microphones of differing
output levels and Guitar or instruments with Hi-Z output. To adjust microphone (Lo-Z) input
levels, turn the "MT" control and to adjust the Guitar or instrument (Hi-Z) input, adjust the "GT"
gain control to set the transmitter's desired audio input level.
PREMIO RANGE User’s Manual
L
CAUTION: BATTERY
For rechargeable batteries we strongly recommend NiMH batteries, no alkanies.
Wrong batteries can damage the microphone functions. Check battery status. Many
batteries are known to have leakage problem of conductive and corrosive liquid.
Remove the batteries if you do not plan to use the belt transmitter for a few days.
Also check that transmitter and receiver are on the same channel.
PREMIO RANGE User’s Manual
17
HC-37 Charger
The beltpack transmitter SM-5016 can be reloaded with the charger HC-37. Before loading check
that the batteries are rechargeable ones.
PREMIO MASTER
Premio (Premio Master) makes wireless link possible with other sound systems. It is equipped with
an external wireless transmitter.
PIED-SS18
The Tripod Stand PIED-SS18 can only be used for Premio8”.
Aluminium tripod stand: Hight min. 1.05 m (41.3”) and max. 1.68 m (66.1”) / max.
30 kg (66 lbs). It has a bag included.
1. Connect the cable to the Premio Master (XLR connector) and the mini
female XLR to the beltpack transmitter M-1002 or SM-5016.
2. Switch on the Slave cabinet (for example Premio/S) and then the beltpack.
3. Switch on the Premio Master.
4. Set the sound level on Premio Master, the beltpack and of the wireless receiver on Xpresso, Premio...
5. The LED is lightning when the VHF or UHF link between transmitter and receiver is ok.
PIED-SPS 4
The Tripod Stand PIED-SPS4 can be used for Premio12” and
Premio15”.
Hand crank tripod stand is delivered with a bag. Height: 1,25-2,05 m /
49.2-80.7“. Max load: 70 kg / 154 lbs
18
PREMIO RANGE User’s Manual
PREMIO RANGE User’s Manual
19
TECHNICAL DATA
PREMIO/8”
RMS Power
Speaker
Power Requirements
Frequency Response
Lead Battery
70 Watts / 4 ohms
1 woofer 8" - 20 cm / 1 compression driver 1”
Operates on AC 220v
70 Hz - 20 KHz
Built-in battery 2.3 Ah - 12 V
Working Time
2-3 hours on built in battery / unlimited on AC main
Inputs
Mixable inputs:
1 RCA Line control input
1 balanced MIC control input on Jack 6,35
Bands EQ
Bass, Mid, Treble
Outputs
Line output on XLR 3 pins
Output speaker on 4 pole Speakon plug
More Information
Drop handle
35 mm (1.43") flange for floor stand
Dimensions: 41 x 26,7 x 26,7 cm / 16.1 x 10.5 x 10.5"
Weight: 7 kg / 15.4 lbs
ABS cabinet
Available in black or white
PREMIO/12” and PREMIO/15”
RMS Power
Speaker
Power Requirements
Frequency Response
Lead Battery
70 Watts / 4 ohms
1 woofer 12" - 31 cm / 1 compression driver 1”
or
1 woofer 15" - 38 cm / 1 compression driver 1”
Operates on AC 220v
70 Hz - 20 KHz
Built-in battery 9 Ah - 12 V
Working Time
3-6 hours on built in battery / unlimited on AC main
Inputs
Mixable inputs:
1 RCA Line control input
1 balanced MIC control input on Jack 6,35
Bands EQ
Bass, Mid, Treble
Outputs
Line output on XLR 3 pins
Output speaker on 4 pole Speakon plug
More Information
Insert handle, Black ABS cabinet
35 mm (1.43") flange for floor stand
Dimensions Premio/12”: 60 x 43 x 33 cm (23.6 x 17 x 13").
Weight Premio/12”: 18 kg / 40 lbs
Dimensions Premio/15”: 70 x 48 x 38 cm (28 x 1 x 15").
Weight Premio/15”: 22 kg / 48.4 lbs
20
PREMIO RANGE User’s Manual