1
Download Preview Sewing Information for #SET005
Transcript
Silhouette Quilts Set005 • Pack 61070 • 15 Designs Note: Some designs in this collection may have been created using unique special stitches and/or techniques. To preserve design integrity when rescaling or rotating designs in your software, always rescale or rotate designs using the handles directly on-screen. OC07001 Dove Appliqué 4.69 X 6.78 in. 119.13 X 172.21 mm 7,867 St. L OC07002 Cardinal Appliqué 4.45 X 4.85 in. 113.03 X 123.19 mm 5,392 St. OC07003 Chickadee Appliqué 4.86 X 4.85 in. 123.44 X 123.19 mm 10,064 St. OC07004 Reindeer Appliqué 4.32 X 4.88 in. 109.73 X 123.95 mm 4,720 St. OC07005 Sleigh Appliqué 4.85 X 4.62 in. 123.19 X 117.35 mm 6,548 St. OC07006 Pinecones Appliqué 4.84 X 4.59 in. 122.94 X 116.59 mm 11,906 St. OC07007 Christmas Tree Appliqué 3.88 X 4.92 in. 98.55 X 124.97 mm 4,084 St. OC07008 Snowflake Appliqué 4.20 X 4.85 in. 106.68 X 123.19 mm 10,218 St. OC07009 Ornaments Appliqué 4.06 X 7.79 in. 103.12 X 197.87 mm 15,023 St. L OC07010 Yule Appliqué 4.18 X 3.19 in. 106.17 X 81.03 mm 3,993 St. OC07011 Noel Appliqué 2.27 X 6.96 in. 57.66 X 176.78 mm 5,556 St. L OC07012 Christmas Appliqué 3.05 X 5.40 in. 77.47 X 137.16 mm 6,554 St. L It is a violation of Copyright law to make and distribute copies of software or artwork. Software is licensed to the original purchaser for use at one location. ©2013 OESD, LLC. All rights reserved. Silhouette Quilts Set005 • Pack 61070 • 15 Designs Note: Some designs in this collection may have been created using unique special stitches and/or techniques. To preserve design integrity when rescaling or rotating designs in your software, always rescale or rotate designs using the handles directly on-screen. OC07013 Snowflake Corner 3.66 X 3.67 in. 92.96 X 93.22 mm 6,213 St. OC07014 Snowflake Border 1.95 X 5.95 in. 49.53 X 151.13 mm 6,742 St. L OC07015 Snowflakes Jumbo Appliqué 5.13 X 8.45 in. 130.30 X 214.63 mm 19,957 St. L It is a violation of Copyright law to make and distribute copies of software or artwork. Software is licensed to the original purchaser for use at one location. ©2013 OESD, LLC. All rights reserved. Silhouette Quilts Set005 • Pack 61070 • 15 Designs Listings below indicate color sample, stitching order and suggested thread color number in Isacord, YLI Fine Metallic, Yenmet or YLI Variegated threads. OC07001 Dove Appliqué n1. Black Detail................................................0020 n2. Appliqué Placement Stitch.........................0020 n 3. Appliqué Tackdown....................................0020 n4. White Detail................................................0670 OC07006 Pinecones Appliqué n1. Black Detail................................................0020 n2. Appliqué Placement Stitch.........................0020 n 3. Appliqué Tackdown....................................0020 n4. White Detail................................................0670 OC07011 Noel Appliqué n1. Black Detail................................................0020 n2. Appliqué Placement Stitch.........................0020 n 3. Appliqué Tackdown....................................0020 n4. White Detail................................................0670 OC07002 Cardinal Appliqué n1. Appliqué Placement Stitch.........................0020 n 2. Appliqué Tackdown....................................0020 n3. White Detail................................................0670 n4. Black Detail................................................0020 OC07007 Christmas Tree Appliqué n1. Black Detail................................................0020 n2. Appliqué Placement Stitch.........................0020 n 3. Appliqué Tackdown....................................0020 n4. White Detail................................................0670 OC07012 Christmas Appliqué n1. Black Detail................................................0020 n2. Appliqué Placement Stitch.........................0020 n 3. Appliqué Tackdown....................................0020 n4. White Detail................................................0670 OC07003 Chickadee Appliqué n1. Black Detail................................................0020 n2. Appliqué Placement Stitch.........................0020 n 3. Appliqué Tackdown....................................0020 n4. White Detail................................................0670 OC07008 Snowflake Appliqué n1. Black Detail................................................0020 n2. Appliqué Placement Stitch.........................0020 n 3. Appliqué Tackdown....................................0020 n4. White Detail................................................0670 OC07013 Snowflake Corner n1. Single Color Design....................................0020 OC07004 Reindeer Appliqué n1. Black Detail................................................0020 n2. Appliqué Placement Stitch.........................0020 n 3. Appliqué Tackdown....................................0020 n4. White Detail................................................0670 OC07009 Ornaments Appliqué n1. Black Detail................................................0020 n2. Appliqué Placement Stitches.....................0020 n 3. Appliqué Tackdowns..................................0020 n4. White Detail................................................0670 OC07015 Snowflakes Jumbo Appliqué n1. Black Detail................................................0020 n2. Appliqué Placement Stitches.....................0020 n 3. Appliqué Tackdowns..................................0020 n4. White Detail................................................0670 OC07005 Sleigh Appliqué n1. Black Detail................................................0020 n2. Appliqué Placement Stitch.........................0020 n 3. Appliqué Tackdown....................................0020 n4. White Detail................................................0670 OC07010 Yule Appliqué n1. Black Detail................................................0020 n2. Appliqué Placement Stitch.........................0020 n 3. Appliqué Tackdown....................................0020 n4. White Detail................................................0670 OC07014 Snowflake Border n1. Single Color Design....................................0020 It is a violation of Copyright law to make and distribute copies of software or artwork. Software is licensed to the original purchaser for use at one location. ©2013 OESD, LLC. All rights reserved. Appliqué Instructions Set005 • Pack 61070 • 15 Designs 1. 2. 3. 4. 5. 6. 7. 8. 9. Print out the necessary pages from the PDF of the appliquè pattern(s). Mark the right side of the pattern pieces so you’ll know which direction to lay the pattern on the fabric. Lightly spray the wrong side of the pattern pieces with temporary adhesive spray and allow it to set for a few minutes. Place the pattern pieces on the right side of the fabric and carefuly cut them out. PHOTO 1 Sew the placement stitch on you hooped fabcric. PHOTO 2 With the paper still stuck to the right side of the appliqué fabric, spray the wrong side of the fabric with temporary spray adhesive. Place the fabric inside the sewing placement stitch so that it matches the stitching line then remove the paper pattern. PHOTO 3 Sew the tackdown. PHOTO 4 Sew the remainder of the design and repeat for any remaining pieces. PHOTO 5 NOTE: The patterns are sized for the designs as they were made. If you resize the design, you will need to resize the pattern the same amount. You can print out the pattern at the normal size then copy it on a copy machine at the changed size, i.e. resize the designs to 80%, resize the printed pattern to 80%. TIP: When Printing the patterns, make sure that the “Fit to page” option is UNCHECKED in the Print Dialog Box. If this option is checked the printed patterns will not be actual size. 1 2 4 3 5 It is a violation of Copyright law to make and distribute copies of software or artwork. Software is licensed to the original purchaser for use at one location. ©2013 OESD, LLC. All rights reserved. ATTENTION When printing this document, any page scaling or page fitting options in your print dialog box must be turned OFF or set to NONE so that your files will print out at their actual size. Images not printed at actual size will not function as intended. TO SAVE PAPER Only print the desired image by navigating to the image’s page, go to File > Print and select “Current page” in the print dialog box. Repeat for each desired image. It is a violation of Copyright law to make and distribute copies of software or artwork. Software is licensed to the original purchaser for use at one location. ©2013 OESD, LLC. All rights reserved. Appliqué Patterns Set005 • Pack 61070 • 15 Designs It is a violation of Copyright law to make and distribute copies of software or artwork. Software is licensed to the original purchaser for use at one location. ©2013 OESD, LLC. All rights reserved. Appliqué Patterns Set005 • Pack 61070 • 15 Designs It is a violation of Copyright law to make and distribute copies of software or artwork. Software is licensed to the original purchaser for use at one location. ©2013 OESD, LLC. All rights reserved. Appliqué Patterns Set005 • Pack 61070 • 15 Designs It is a violation of Copyright law to make and distribute copies of software or artwork. Software is licensed to the original purchaser for use at one location. ©2013 OESD, LLC. All rights reserved. Appliqué Patterns Set005 • Pack 61070 • 15 Designs It is a violation of Copyright law to make and distribute copies of software or artwork. Software is licensed to the original purchaser for use at one location. ©2013 OESD, LLC. All rights reserved. Appliqué Patterns Set005 • Pack 61070 • 15 Designs It is a violation of Copyright law to make and distribute copies of software or artwork. Software is licensed to the original purchaser for use at one location. ©2013 OESD, LLC. All rights reserved. Lace Ornaments Set005 • Pack 61071 • 20 Files Note: Some designs in this collection may have been created using unique special stitches and/or techniques. To preserve design integrity when rescaling or rotating designs in your software, always rescale or rotate designs using the handles directly on-screen. OC07101 FSL Teardrop Ornament Piece with Appliqué 2.00 X 6.07 in. 50.80 X 154.18 mm 14,349 St. L OC07102 FSL Globe Ornament Piece with Appliqué 2.21 X 5.10 in. 56.13 X 129.54 mm 13,640 St. L OC07103 FSL Cone Basket Piece with Appliqué 2.13 X 5.34 in. 54.10 X 135.64 mm 13,207 St. L OC07104 FSL Optional Scallop Trim Piece 1.64 X 1.15 in. 41.66 X 29.21 mm 4,285 St. S OC07105 FSL Spiral Snowflake Piece with Appliqué 4.31 X 4.01 in. 109.47 X 101.85 mm 25,561 St. OC07106 FSL Spiral Snowflake Base 4.87 X 4.97 in. 123.70 X 126.24 mm 55,111 St. OC07107 FSL Gift Box 4.78 X 6.78 in. 121.41 X 172.21 mm 50,587 St. L OC07108 FSL Gift Box Bow 1.74 X 6.86 in. 44.20 X 174.24 mm 27,423 St. L OC07109 FSL Icicle .52 X 8.15 in. 13.21 X 207.01 mm 11,952 St. L S OC07110 FSL Sleigh Ornament with Appliqué 4.66 X 3.91 in. 118.36 X 99.31 mm 27,433 St. OC07111 FSL Stocking Ornament with Appliqué 2.85 X 4.42 in. 72.39 X 112.27 mm 18,297 St. OC07112 FSL Gift Ornament with Appliqué 3.01 X 4.04 in. 76.45 X 102.62 mm 23,674 St. It is a violation of Copyright law to make and distribute copies of software or artwork. Software is licensed to the original purchaser for use at one location. ©2013 OESD, LLC. All rights reserved. Lace Ornaments Set005 • Pack 61071 • 20 Files Note: Some designs in this collection may have been created using unique special stitches and/or techniques. To preserve design integrity when rescaling or rotating designs in your software, always rescale or rotate designs using the handles directly on-screen. OC07113 FSL Christmas Tree Ornament with Appliqué 3.64 X 4.84 in. 92.46 X 122.94 mm 20,226 St. OC07114 FSL Joy Ornament with Appliqué 3.72 X 4.53 in. 94.49 X 115.06 mm 20,601 St. OC07115 FSL Large Star Ornament with Appliqué 3.09 X 3.48 in. 78.49 X 88.39 mm 16,078 St. OC07116 FSL Medium Star Ornament with Appliqué 2.41 X 3.03 in. 61.21 X 76.96 mm 12,143 St. OC07117 FSL Small Star Ornament with Appliqué 1.71 X 2.15 in. 43.43 X 54.61 mm 6,772 St. OC07118 FSL Optional Bell Charm 1.23 X 1.62 in. 31.24 X 41.15 mm 4,117 St. S OC07119 FSL Optional Star Charm 1.02 X 1.54 in. 25.91 X 39.12 mm 3,640 St. S OC07120 FSL Optional Round Charm 1.01 X 1.66 in. 25.65 X 42.16 mm 3,935 St. S It is a violation of Copyright law to make and distribute copies of software or artwork. Software is licensed to the original purchaser for use at one location. ©2013 OESD, LLC. All rights reserved. Lace Ornaments Set005 • Pack 61071 • 20 Files Listings below indicate color sample, stitching order and suggested thread color number in Isacord, YLI Fine Metallic, Yenmet or YLI Variegated threads. OC07101 FSL Teardrop Ornament Piece with Appliqué n 1. Appliqué Placement Stitch....................0670 n 2. Appliqué Cut Line & Tackdown.............0670 n 3. Gold Detail.............................................7012 n 4.Lace.......................................................0670 OC07102 FSL Globe Ornament Piece with Appliqué n 1. Appliqué Placement Stitch....................0670 n 2. Appliqué Cut Line & Tackdown.............0670 n 3. Gold Detail.............................................7012 n 4.Lace.......................................................0670 OC07103 FSL Cone Basket Piece with Appliqué n 1. Appliqué Placement Stitch....................0670 n 2. Appliqué Cut Line & Tackdown.............0670 n 3. Gold Detail.............................................7012 n 4.Lace.......................................................0670 OC07104 FSL Optional Scallop Trim Piece n 1. Single Color Design...............................0670 OC07105 FSL Spiral Snowflake Piece with Appliqué n 1. Appliqué Placement Stitch....................0670 n 2. Appliqué Cut Line & Tackdown.............0670 n 3. Gold Detail.............................................7012 n 4.Lace.......................................................0670 OC07106 FSL Spiral Snowflake Base n 1. Single Color Design...............................0670 OC07107 FSL Gift Box n 1. Single Color Design...............................0670 OC07108 FSL Gift Box Bow n 1. Single Color Design...............................0670 OC07109 FSL Icicle n 1. Single Color Design...............................0670 OC07110 FSL Sleigh Ornament with Appliqué n 1. Appliqué Placement Stitch....................0670 n 2. Appliqué Cut Line & Tackdown.............0670 n 3. Gold Detail.............................................7012 n 4.Lace.......................................................0670 OC07111 FSL Stocking Ornament with Appliqué n 1. Appliqué Placement Stitch....................0670 n 2. Appliqué Cut Line & Tackdown.............0670 n 3. Gold Detail.............................................7012 n 4.Lace.......................................................0670 OC07112 FSL Gift Ornament with Appliqué n 1. Appliqué Placement Stitch....................0670 n 2. Appliqué Cut Line & Tackdown.............0670 n 3. Gold Detail.............................................7012 n 4.Lace.......................................................0670 OC07113 FSL Christmas Tree Ornament with Appliqué n 1. Appliqué Placement Stitch....................0670 n 2. Appliqué Cut Line & Tackdown.............0670 n 3. Gold Detail.............................................7012 n 4.Lace.......................................................0670 OC07115 FSL Large Star Ornament with Appliqué n 1. Appliqué Placement Stitch....................0670 n 2. Appliqué Cut Line & Tackdown.............0670 n 3. Gold Detail.............................................7012 n 4.Lace.......................................................0670 OC07116 FSL Medium Star Ornament with Appliqué n 1. Appliqué Placement Stitch....................0670 n 2. Appliqué Cut Line & Tackdown.............0670 n 3. Gold Detail.............................................7012 n 4.Lace.......................................................0670 OC07117 FSL Small Star Ornament with Appliqué n 1. Appliqué Placement Stitch....................0670 n 2. Appliqué Cut Line & Tackdown.............0670 n 3. Gold Detail.............................................7012 n 4.Lace.......................................................0670 OC07118 FSL Optional Bell Charm n 1. Single Color Design...............................0670 OC07119 FSL Optional Star Charm n 1. Single Color Design...............................0670 OC07120 FSL Optional Round Charm n 1. Single Color Design...............................0670 OC07114 FSL Joy Ornament with Appliqué n 1. Appliqué Placement Stitch....................0670 n 2. Appliqué Cut Line & Tackdown.............0670 n 3. Gold Detail.............................................7012 n 4.Lace.......................................................0670 It is a violation of Copyright law to make and distribute copies of software or artwork. Software is licensed to the original purchaser for use at one location. ©2013 OESD, LLC. All rights reserved. ATTENTION When printing this document, any page scaling or page fitting options in your print dialog box must be turned OFF or set to NONE so that your files will print out at their actual size. Images not printed at actual size will not function as intended. TO SAVE PAPER Only print the desired image by navigating to the image’s page, go to File > Print and select “Current page” in the print dialog box. Repeat for each desired image. It is a violation of Copyright law to make and distribute copies of software or artwork. Software is licensed to the original purchaser for use at one location. ©2013 OESD, LLC. All rights reserved. Appliqué Patterns Set005 • Pack 61071 • 20 Files It is a violation of Copyright law to make and distribute copies of software or artwork. Software is licensed to the original purchaser for use at one location. ©2013 OESD, LLC. All rights reserved. Appliqué Patterns Set005 • Pack 61071 • 20 Files It is a violation of Copyright law to make and distribute copies of software or artwork. Software is licensed to the original purchaser for use at one location. ©2013 OESD, LLC. All rights reserved. Pre-cut appliqué files for use with BERNINA CutWork Accessory Set005 • Pack 61071 • 20 Files OC07101_CWA For use with the BERNINA CutWork Accessory 1.76 X 3.42 in. 44.70 X 86.87 mm 1,653 St. OC07102_CWA For use with the BERNINA CutWork Accessory 2.26 X 4.01 in. 57.40 X 101.85 mm 1,900 St. OC07103_CWA For use with the BERNINA CutWork Accessory 2.06 X 3.54 in. 52.32 X 89.92 mm 1,691 St. OC07105_CWA For use with the BERNINA CutWork Accessory 2.65 X 2.83 in. 67.31 X 71.88 mm 1,761 St. OC07110_CWA For use with the BERNINA CutWork Accessory 3.99 X 2.68 in. 101.35 X 68.07 mm 2,302 St. OC07111_CWA For use with the BERNINA CutWork Accessory 2.78 X 3.31 in. 70.61 X 84.07 mm 1,789 St. OC07112_CWA01 For use with the BERNINA CutWork Accessory 1.60 X 2.76 in. 40.64 X 70.10 mm 1,144 St. OC07112_CWA02 For use with the BERNINA CutWork Accessory 1.60 X 2.76 in. 40.64 X 70.10 mm 1,192 St. OC07113_CWA For use with OC07114_CWA For use with OC07115_CWA For use with OC07116_CWA For use with OC07117_CWA For use with the BERNINA CutWork the BERNINA CutWork the BERNINA CutWork the BERNINA CutWork the BERNINA CutWork Accessory Accessory Accessory Accessory Accessory 3.54 X 4.26 in. 3.89 X 4.48 in. 2.92 X 2.77 in. 2.34 X 2.34 in. 2.09 X 1.97 in. 89.92 X 108.20 mm 98.81 X 113.79 mm 74.17 X 70.36 mm 59.44 X 59.44 mm 53.09 X 50.04 mm 2,462 St. 3,229 St. 1,538 St. 1,258 St. 1,012 St. It is a violation of Copyright law to make and distribute copies of software or artwork. Software is licensed to the original purchaser for use at one location. ©2013 OESD, LLC. All rights reserved. Pre-cut appliqué files for use with BERNINA CutWork Accessory Set005 • Pack 61071 • 20 Files NOTE: Placement Stitch and Basting Stitch should match your background fabric. OC07101_CWA For use with the BERNINA CutWork Accessory n 1. Placement Stitch....................................3600 n 2. Basting Stitch.........................................1902 n 3. BERNINA CutWork Accessory Cut 1.... Cut 1 n 4. BERNINA CutWork Accessory Cut 2.... Cut 2 n 5. BERNINA CutWork Accessory Cut 3.... Cut 3 n 6. BERNINA CutWork Accessory Cut 4.... Cut 4 OC07111_CWA For use with the BERNINA CutWork Accessory n 1. Placement Stitch....................................3600 n 2. Basting Stitch.........................................1902 n 3. BERNINA CutWork Accessory Cut 1.... Cut 1 n 4. BERNINA CutWork Accessory Cut 2.... Cut 2 n 5. BERNINA CutWork Accessory Cut 3.... Cut 3 n 6. BERNINA CutWork Accessory Cut 4.... Cut 4 OC07115_CWA For use with the BERNINA CutWork Accessory n 1. Placement Stitch....................................3600 n 2. Basting Stitch.........................................1902 n 3. BERNINA CutWork Accessory Cut 1.... Cut 1 n 4. BERNINA CutWork Accessory Cut 2.... Cut 2 n 5. BERNINA CutWork Accessory Cut 3.... Cut 3 n 6. BERNINA CutWork Accessory Cut 4.... Cut 4 OC07102_CWA For use with the BERNINA CutWork Accessory n 1. Placement Stitch....................................3600 n 2. Basting Stitch.........................................1902 n 3. BERNINA CutWork Accessory Cut 1.... Cut 1 n 4. BERNINA CutWork Accessory Cut 2.... Cut 2 n 5. BERNINA CutWork Accessory Cut 3.... Cut 3 n 6. BERNINA CutWork Accessory Cut 4.... Cut 4 OC07112_CWA01 For use with the BERNINA CutWork Accessory n 1. Placement Stitch....................................3600 n 2. Basting Stitch.........................................1902 n 3. BERNINA CutWork Accessory Cut 1.... Cut 1 n 4. BERNINA CutWork Accessory Cut 3.... Cut 3 OC07116_CWA For use with the BERNINA CutWork Accessory n 1. Placement Stitch....................................3600 n 2. Basting Stitch.........................................1902 n 3. BERNINA CutWork Accessory Cut 1.... Cut 1 n 4. BERNINA CutWork Accessory Cut 2.... Cut 2 n 5. BERNINA CutWork Accessory Cut 3.... Cut 3 n 6. BERNINA CutWork Accessory Cut 4.... Cut 4 OC07103_CWA For use with the BERNINA CutWork Accessory n 1. Placement Stitch....................................3600 n 2. Basting Stitch.........................................1902 n 3. BERNINA CutWork Accessory Cut 1.... Cut 1 n 4. BERNINA CutWork Accessory Cut 2.... Cut 2 n 5. BERNINA CutWork Accessory Cut 3.... Cut 3 n 6. BERNINA CutWork Accessory Cut 4.... Cut 4 OC07105_CWA For use with the BERNINA CutWork Accessory n 1. Placement Stitch....................................3600 n 2. Basting Stitch.........................................1902 n 3. BERNINA CutWork Accessory Cut 1.... Cut 1 n 4. BERNINA CutWork Accessory Cut 2.... Cut 2 n 5. BERNINA CutWork Accessory Cut 3.... Cut 3 n 6. BERNINA CutWork Accessory Cut 4.... Cut 4 OC07110_CWA For use with the BERNINA CutWork Accessory n 1. Placement Stitch....................................3600 n 2. Basting Stitch.........................................1902 n 3. BERNINA CutWork Accessory Cut 1.... Cut 1 n 4. BERNINA CutWork Accessory Cut 2.... Cut 2 n 5. BERNINA CutWork Accessory Cut 3.... Cut 3 n 6. BERNINA CutWork Accessory Cut 4.... Cut 4 OC07112_CWA02 For use with the BERNINA CutWork Accessory n 1. Placement Stitch....................................3600 n 2. Basting Stitch.........................................1902 n 3. BERNINA CutWork Accessory Cut 1.... Cut 1 n 4. BERNINA CutWork Accessory Cut 2.... Cut 2 n 5. BERNINA CutWork Accessory Cut 3.... Cut 3 OC07113_CWA For use with the BERNINA CutWork Accessory n 1. Placement Stitch....................................3600 n 2. Basting Stitch.........................................1902 n 3. BERNINA CutWork Accessory Cut 1.... Cut 1 n 4. BERNINA CutWork Accessory Cut 2.... Cut 2 n 5. BERNINA CutWork Accessory Cut 3.... Cut 3 n 6. BERNINA CutWork Accessory Cut 4.... Cut 4 OC07117_CWA For use with the BERNINA CutWork Accessory n 1. Placement Stitch....................................3600 n 2. Basting Stitch.........................................1902 n 3. BERNINA CutWork Accessory Cut 1.... Cut 1 n 4. BERNINA CutWork Accessory Cut 2.... Cut 2 n 5. BERNINA CutWork Accessory Cut 3.... Cut 3 n 6. BERNINA CutWork Accessory Cut 4.... Cut 4 OC07114_CWA For use with the BERNINA CutWork Accessory n 1. Placement Stitch....................................3600 n 2. Basting Stitch.........................................1902 n 3. BERNINA CutWork Accessory Cut 1.... Cut 1 n 4. BERNINA CutWork Accessory Cut 2.... Cut 2 n 5. BERNINA CutWork Accessory Cut 3.... Cut 3 n 6. BERNINA CutWork Accessory Cut 4.... Cut 4 It is a violation of Copyright law to make and distribute copies of software or artwork. Software is licensed to the original purchaser for use at one location. ©2013 OESD, LLC. All rights reserved. Making Pre-cut Appliqué Using BERNINA CutWork Accessory Set005 • Pack 61071 • 20 Files • • • • • • SUPPLIES Cut-AwayStabilizer TemporarySprayAdhesive AppliquéFuse&FixStabilizer EmbroideryThread Stabilizerthatisappropriateforyourproject BERNINA®CutWorkAccessory PREPARE APPLIQUE FABRIC 1. Starchappliquéfabric2-3timesfollowingmanufacturer’sinstructions. 2. Appliquéfabricshouldbecrisp. 3. IronAppliquéFuse&Fixtothewrongsideof thestarchedappliquéfabricfollowing instructionsonproductpackaging. CUT APPLIQUÉ PIECES 1. Hooponelayerof Cut-AwayStabilizer. 2. SendfirstCWAfiletotheembroiderymachine.(CWAfilesarethepre-cutappliquéfiles tousewiththeCutWorkAccessory;thesefileswillendinCWA01,CWA02,andCWA03 etc.Thenumberof CWAfilesavailableforeachdesignwilldependuponhowmany separateappliquéseachdesigncontains.) 3. Stitchthefirstcolor,thiswillbetheplacementstitch. 4. Removethehoopfromthemachinebutdonotremovethestabilizerfromthehoop. Spraythehoopedstabilizerwithtemporarysprayadhesive.Laypreparedappliquéfabric overtheplacementstitch,beingsuretocompletelycoverthestitching.Applypressureto appliquéfabrictoensureitisadhered. 5. Stitchthesecondcolor,thiswillbethebastingstitch.Itismeanttobastetheappliqué fabrictoyourhoopedstabilizer. 6. ReplacenormalstitchplatewiththeCutWorkstitchplate. 7. Unthreadthemachine. 8. If necessary,turnoff theupperthreadcontrolonyourmachine.Refertoyourmachine’s usermanual.Notethatthemostrecentversionof the830willperformthistask automatically. 9. ReplaceembroideryneedlewiththeCutWorkAccessory. 10. Replaceembroideryfootwithfoot#44(If youdonothavefoot#44youcanleavefoot #15onthemachine;foot#44willsimplykeepthecutfabricfromflaggingasmuch). 11. Attachthehooptothemachine. 12. Tocutthefirstappliquépiecefollowthe“threadchanges”onyourmachinescreenand turnthedialontheCutWorktoolasrequired. 13. Removethehoopfromthemachine. 14. Gentlyremovecutappliquépiece,trimminganythreadthatmayhavenotbeencut completely.PHOTO 1 15. Repeatasneededfordesignswithmultipleappliquépieces. PHOTO 1 PHOTO 2 PHOTO 3 TACKDOWN APPLIQUÉ AND COMPLETE EMBROIDERY DESIGN PHOTO 4 1. Replacetheembroideryneedleandrethreadthemachine. 2. Replacetheembroideryfoot#15. 3. Sprayhoopsizedpieceof stabilizerthatisappropriateforyourprojectandadhereto wrongsideof backgroundfabricorprojectthatistobehooped. 4. Hoopfabric/projectandstabilizer. 5. Attachhooptomachine. 6. Sendtheembroideryfiletothemachine(thisisnotaCWAfile). 7. StitchdesignasnormalfollowingthethreadchangesontheprovidedthreadchartstoppingaftereachAppliquéPlacementStitch. 8. AfterstitchinganAppliquéPlacementStitch,taketheprecutappliquépiecesrequiredandpeeloff thecutawaybackingandtherelease paperrevealingastickybacking.PHOTO 2 9. Removehoopfrommachine,butdonotremovethefabricfromthehoop. 10. AdhereprecutappliquépieceevenlyovertheAppliquéPlacementStitch;usepressuretomakesurepiecesstickwell.PHOTO 3 11. Reattachhooptomachine. 12. Continuestitchingdesignuntilallappliquépiecesareplacedandallstitchingiscomplete.PHOTO 4 NOTE: Design pictured is for instructional purposes and is not included in this collection. It is a violation of Copyright law to make and distribute copies of software or artwork. Software is licensed to the original purchaser for use at one location. ©2013 OESD, LLC. All rights reserved. 3D Ornaments - Summary Teardrop Ornament (with Appliqué) Requires 6 FSL Teardrop Ornament Piece with Appliqué – OC07101 Optional Lace Trim - requires 6 FSL Scallop Trim Piece – OC07104 Globe Ornament (with Appliqué) Requires 6 FSL Globe Ornament Piece with Appliqué – OC07102 Optional Lace Trim - requires 6 FSL Scallop Trim Piece – OC07104 Cone Basket (with Appliqué) Requires 4 FSL Cone Basket Piece with Appliqué – OC07103 Optional Lace Trim - requires 4 FSL Scallop Trim Piece – OC07104 Spiral Snowflake Ornament (with Appliqué) Requires 1 FSL Spiral Snowflake Piece with Appliqué – OC07105 Requires 1 FSL Spiral Snowflake Base – OC07106 Small Gift Box Requires 1 FSL Gift Box – OC07107 Requires 1 FSL Gift Box Bow – OC07108 Spiral Icicle (with Appliqué) Requires 1 FSL Icicle – OC07109 Collection #2 • Set005 1 www.embroideryonline.com ©2013 OESD, LLC. Flat Ornaments – Summary Sleigh Ornament (with Appliqué) Requires 1 FSL Sleight Ornament with Appliqué – OC07110 Optional Charm of your choice – OC07118, OC07119 or OC07120 Stocking Ornament (with Appliqué) Requires 1 FSL Stocking Ornament with Appliqué – OC07111 Optional Charm of your choice – OC07118, OC07119 or OC07120 Gift Ornament (with Appliqué) Requires 1 FSL Gift Ornament with Appliqué – OC07112 Optional Charm of your choice – OC07118, OC07119 or OC07120 Christmas Tree Ornament (with Appliqué) Requires 1 FSL Christmas Tree Ornament with Appliqué – OC07113 Optional Charm of your choice – OC07118, OC07119 or OC07120 Joy Ornament (with Appliqué) Requires 1 FSL Joy Ornament with Appliqué – OC07114 Optional Charm of your choice – OC07118, OC07119 or OC07120 Tiered Star Ornament (with Appliqué) Requires 1 FSL Large Star Ornament with Appliqué – OC07115 Requires 1 FSL Medium Star Ornament with Appliqué – OC07116 Requires 1 FSL Small Star Ornament with Appliqué – OC07117 Optional Charm of your choice – OC07118, OC07119 or OC07120 Collection #2 • Set005 2 www.embroideryonline.com ©2013 OESD, LLC. + = + OC07101 FSL Teardrop Ornament Piece with Appliqué OC07101 FSL Teardrop Ornament Piece with Appliqué + + OC07101 FSL Teardrop Ornament Piece with Appliqué + 3D FSL Teardrop Ornament OC07101 FSL Teardrop Ornament Piece with Appliqué OC07101 FSL Teardrop Ornament Piece with Appliqué OC07101 FSL Teardrop Ornament Piece with Appliqué TO ADD OPTIONAL SCALLOP TRIM YOU WILL NEED THESE ADDITIONAL PIECES = + + OC07104 FSL Optional Scallop Trim OC07104 FSL Optional Scallop Trim (with optional scallop trim) OC07104 FSL Optional Scallop Trim OC07104 FSL Optional Scallop Trim + + 3D FSL Teardrop Ornament + OC07104 FSL Optional Scallop Trim OC07104 FSL Optional Scallop Trim Collection #2 • Set005 3 www.embroideryonline.com ©2013 OESD, LLC. + = OC07102 FSL Globe Ornament Piece with Appliqué + OC07102 FSL Globe Ornament Piece with Appliqué + 3D FSL Globe Ornament OC07102 FSL Globe Ornament Piece with Appliqué + OC07102 FSL Globe Ornament Piece with Appliqué + OC07102 FSL Globe Ornament Piece with Appliqué OC07102 FSL Globe Ornament Piece with Appliqué TO ADD OPTIONAL SCALLOP TRIM YOU WILL NEED THESE ADDITIONAL PIECES + + = 3D FSL Teardrop Ornament OC07104 FSL Optional Scallop Trim OC07104 FSL Optional Scallop Trim OC07104 FSL Optional Scallop Trim + + OC07104 FSL Optional Scallop Trim + OC07104 FSL Optional Scallop Trim OC07104 FSL Optional Scallop Trim (with optional scallop trim) Collection #2 • Set005 4 www.embroideryonline.com ©2013 OESD, LLC. = + OC07103 FSL Cone Basket Piece with Appliqué + OC07103 FSL Cone Basket Piece with Appliqué + OC07103 FSL Cone Basket Piece with Appliqué OC07103 FSL Cone Basket Piece with Appliqué 3D FSL Cone Basket TO ADD OPTIONAL SCALLOP TRIM YOU WILL NEED THESE ADDITIONAL PIECES = + + + OC07104 FSL Optional OC07104 FSL Optional OC07104 FSL Optional OC07104 FSL Optional Scallop Trim Scallop Trim Scallop Trim Scallop Trim 3D FSL Cone Basket (with optional scallop trim) Collection #2 • Set005 5 www.embroideryonline.com ©2013 OESD, LLC. = + OC07105 FSL Spiral Snowflake Piece with Appliqué 3D FSL Spiral Snowflake = OC07106 FSL Spiral Snowflake Base + OC07107 FSL Gift Box 3D FSL Gift Box = OC07108 FSL Gift Box Bow OC07109 FSL Icicle 3D FSL Spiral Icicle Collection #2 • Set005 6 www.embroideryonline.com ©2013 OESD, LLC. FLAT ORNAMENTS OPTIONS OC07115 FSL Large Star Ornament with Applique Tiered Star Ornament Use thread, wire or ribbon to string the three stars one under another to create a tiered ornament. In addition to this tiered ornament, the individual stars can be used as ornaments by themselves. OC07116 FSL Medium Star Ornament with Applique OC07117 FSL Small Star Ornament with Applique Optional Charms There are three charms included in the collection than can be stitched as freestanding lace and added to the bottom of the ornaments with thread, wire or ribbon. A charm can even be added to the bottom of the Tiered Star Ornament shown above. In place of or in addition to these stitched charms you can always add store bought metal charms, beads or even tassels. Examples of ornaments with stitched charms OC0718 FSL Bell Charm OC0719 FSL Star Charm OC0720 FSL Round Charm Collection #2 • Set005 7 www.embroideryonline.com ©2013 OESD, LLC. Instructions for Ornaments of Collection #2 Handy tips: 1. A pair of tweezers, hemostats, stiletto or a tiny crochet hook can be extremely helpful when inserting the buttonettes into the eyelets. (Please see Picture 1 for explanation of “buttonette” and “eyelet” for 3D Ornaments.) 2. Insert the tip of the tweezers, hemostats or crochet hook into the eyelet, grasp the buttonette and pull through the eyelet. 3. A Stiletto could be used to “push” the buttonette through the eyelet. 4. The ornaments look and wear better when left fairly stiff. When the design is finished stitching, wash the design lightly so that some of the water soluble stabilizer stays in the design. It is better to hold the ornament gently and allow the water to flow through rather than working at it or scrubbing the lace. 5. If item becomes too limp to work with, dissolve scrap pieces of water soluble stabilizer in warm water and apply to the item to re-stiffen. 3D Ornaments Buttonettes Eyelets Picture 1 Teardrop Ornament (with Appliqué) 1. Follow the General Free Standing Lace Guidelines (page 10) and Cut In Place Appliqué Instructions (page 10) and stitch 6 of design FSL Teardrop Ornament Piece with Appliqué – OC07101. 2. If you would like to add the Optional Scallop Trim insert the buttonettes on each end of the trim into the eyelets of an ornament piece. The eyelets can be found about in the center of the piece, one on each side of the applique fabric. Repeat for all 6 sides. If you opt to omit the lace trim simply skip step 2 and proceed to step 3. 3. With 2 of the 6 stitched pieces back to back (fronts facing out), insert the 3 center buttonettes of one piece into the matching eyelets of the second piece. Continue until the 3 centers buttonettes are connected all the way around the ornament. The 2 buttonettes on the bottom and the 2 buttonettes on the top should remain undone at this point. 4. Insert the bottom 2 buttonettes into their matching eyelets. Continue around ornament. 5. Finally, insert the top two buttonettes into their matching eyelets to finish the ornament. Continue around ornament. • Please note: To add a hanger to your ornament do not insert the last buttonette into the eyelet. 6. To add a hanger to your ornament follow Hanging Your Ornament Instructions (page 11). Picture 2 7. To complete the ornament, button the last buttonette into the remaining unused eyelet. Globe Ornament (with Appliqué) 1. Follow the General Free Standing Lace Guidelines (page 10) and Cut In Place Appliqué Instructions (page 10) and stitch 6 of design FSL Globe Ornament Piece with Appliqué – OC07102. 2. With 2 of the 6 stitched pieces back to back (fronts facing out), insert the 3 center buttonettes of one piece into the matching eyelets of the second piece. Continue around the ornament. The 6 buttonettes around the bottom and the 6 buttonettes around the top should remain undone at this point. 3. If you would like to add the Optional Scallop Trim insert the buttonette on one end of the scallop trim into the corresponding eyelet on the ornament side piece. The eyelets can be found just below the appliqué and on either side of the open spot in the lace. The left buttonette of the scallop trim will insert into the eyelet on the right side of the ornament piece and the right buttonette of the trim will insert into the eyelet on the left side of the next ornament piece so that the trim “bridges” over the “seams” of the ornament (refer to Picture 2). If you opt to omit the lace trim simply skip step 3 and proceed to step 4. Collection #2 • Set005 8 www.embroideryonline.com ©2013 OESD, LLC. 4. Insert the bottom buttonettes into thier matching eyelets. Continue around ornament. 5. Finally, insert the top buttonettes into their matching eyelets to finish the ornament. Continue around ornament. • Please note: To add a hanger to your ornament do not insert the last buttonette into the eyelet. 6. To add a hanger to your ornament follow Hanging Your Ornament Instructions (page 11). 7. To complete the ornament, button the last buttonette into the remaining unused eyelet. Cone Basket (with Appliqué) 1. Follow the General Free Standing Lace Guidelines (page 10) and Cut In Place Appliqué Instructions (page 10) and stitch 4 of design FSL Cone Basket Piece with Applique - OC07103 2. With 2 of the stitched pieces back to back (fronts facing out), insert the 5 buttonettes into the 5 eyelets on the second piece. Continue around ornament. 3. If you would like to add the Optional Scallop Trim insert the buttonettes of the trim into the eyelets on each side just under the top of the sides. If you opt to omit the lace trim simply skip step 3. Spiral Snowflake Ornament (with Appliqué) 1. Follow the General Free Standing Lace Guidelines (page 10) and Cut In Place Appliqué Instructions (page 10) and stitch 1 each of design FSL Spiral Snowflake Piece with Appliqué – OC07105 and FSL Spiral Snowflake base OC07106 2. Lay the base of the snowflake flat with right side up. 3. Notice that in the base piece there are two eyelets on each spoke next to one another. Insert one buttonette located on the tip of one of the spokes of the top piece into one of the eyelets located on one of the spokes of the base piece. When performing this step you can use either eyelet. The one on the left of the “stem” will create a slightly more raised effect than the eyelet on the right. Alternating between the left and right eyelets on every other spoke will create a bit of a waved effect. Continue by inserting the buttonette of the next spoke of the top piece into one of the eyelets of the next spoke of the base. Continue around until all 6 buttonettes are inserted. Gift Box 1. Follow the General Free Standing Lace Guidelines (page 10) and stitch 1 each of design FSL Gift Box – OC07107 and FSL Gift Box Bow - OC07108. 2. Refering to Picture 3, with right side down, fold the front and the right side of the box up and insert the buttonette on the right side into the eyelet of the front. 3. Fold the left side up and insert the buttonette on the front into the eyelet on the left side. 4. Fold the back side up and insert the buttonette on the backside into the eyelet on the right side. 5. Insert the eyelet on the left side into the buttonette of the back side. 6. Fold the top over and insert the latch button into the latch button hole to close the box. 7. Shape the bow by inserting the left buttonette into the left eyelet from the underside. Refer to Picture 4. 8. Repeat for right side. 9. Attach ribbon to top of box by inserting the 2 eyelets in the center of the ribbon into the 2 eyelets on the box lid. It may be helpful to unlatch and open the lid for this step. Latch Button Top Back Left Side Bottom Right Side Front Picture 3 Latch Button Hole Picture 4 Collection #2 • Set005 9 www.embroideryonline.com ©2013 OESD, LLC. Spiral Icicle Ornament 1. Follow the General Free Standing Lace Guidelines below and stitch 1 of design FSL Spiral Icicle - OC07109. 2. Immediately after rinsing the stitched piece wrap it in a spiral around a dowel rod or other long round object. Once wrapped, secure to dowel rod by wrapping with thread. 3. Allow to dry. 4. If too much water soluble stabilizer was rinsed away, restiffen by disolving scraps of water soluble stabilizer in warm water then rub ornament down with mixture while still wrapped around dowel rod. 5. After ornament dries remove the thread securing it in place and remove from dowel rod. CUT IN PLACE APPLIQUÉ METHOD 1. 2. 3. 4. 5. 6. Hoop your fabric and backing. Sew the pattern/placement. PHOTO 1 Place a piece of appliqué fabric over the pattern/placement so that it is completely covered. Sew the trim stitch/tackdown. Carefully cut away the excess appliqué fabric.PHOTO 2 Sew the remainder of the design and repeat for any remaining pieces. PHOTO 3 1 2 3 General Freestanding Lace Guidelines SUPPLIES: Embroidery Thread: • Usethesameembroiderythreadinthebobbinastheneedle. Needles: • UseanOrgan80/12Titaniumneedleforextendedneedlelife. Stablilizer: • Usewater-soluablestabilizerorfilmwater-solublestabilizer. GENERAL INSTRUCTIONS 1.Hooptwolayersof water-solublestabilizer. 2.Attachthehooptothemachineandselectthedesignof your choice. 3.Stitchthedesign. 4.Removethehoopfromthemachineandthedesignfromthe hoop.Trimexcessstabilizerfromthedesign. 5.Rinseawayremainingstabilizerandallowittodry. HANDY HINTS: For Stiffer Lace: • DONOTRINSEawayallof thestabilizerfora“stiffer”lace. However,donotethatthethreadmayappearashadedarkerif stabilizerisnotremovedcompletely. • If youhappentowashtoomuchout,easilyre-stiffenbydiluting somestabilizerscrapsinwateranddippingtheiteminthe solution. For Very Soft Lace: • Cutawayexcessstabilizer.Removeremainingstabilizerbyrinsing underwarmrunningwateruntilalltracesof thestabilizerare gone. • Note:If laceshouldbecometoolimptoworkwith,dissolve stabilizerscrapsinwarmwaterandapplytothelace. Drying Lace: • Laylacepiecewithrightsidedowntodry.Thiswillminimizethe tendancyforthelacetocurl. TIP: When assembling items with buttonettes and eyelets it is easier to work with the item while it is still damp, you can “smash” the buttonettes, insert them into the eyelets then flatten them back out to dry. If item has dried simply dampen only the buttonettes with a spray bottle or shallow dish of water. Collection #2 • Set005 10 www.embroideryonline.com ©2013 OESD, LLC. HANGING YOUR ORNAMENTS HAnging yOur OrnAMenTS: Supplies: • 11/16” Screw Eyes – Small • 1” Styrofoam Balls • ¼” ribbon Assemble Hanger: 1. Twist one screw eye into a foam ball. 2. Cut desired length of ribbon and thread it through the screw eye. Tie loose ends to form a loop. PHOTO 1 3. Drop hanger inside ornament then finish buttoning it up. 4. Turn ornament upside down. Use a pair of tweezers if necessary to feed ribbon out of top of ornament. PHOTO 2 5. To prevent hanger from falling into ornament you can dab a little glue on ball then hang ornament to allow glue to dry. PHOTO 1 PHOTO 2 Multiple Ornament Hanger: 1. Twist a second eye screw into opposite end of foam ball. 2. Twist eye screw into another foam ball. 3. Thread ribbon through both eye screws. Tie loose ends to form a loop. PHOTO 3 4. Repeat at required. PHOTO 3 Collection #2 • Set005 11 www.embroideryonline.com ©2013 OESD, LLC. Winter Treasures Set005 • Pack 61072 • 15 Designs Note: Some designs in this collection may have been created using unique special stitches and/or techniques. To preserve design integrity when rescaling or rotating designs in your software, always rescale or rotate designs using the handles directly on-screen. OC07201 Pointed Ornament 2.84 X 5.09 in. 72.14 X 129.29 mm 8,359 St. L OC07202 Globe Ornament 2.56 X 4.46 in. 65.02 X 113.28 mm 10,531 St. OC07203 Finial Ornament 2.03 X 5.01 in. 51.56 X 127.25 mm 6,668 St. L OC07204 Candy Cane 2.31 X 4.06 in. 58.67 X 103.12 mm 6,472 St. OC07205 Drum 2.33 X 3.23 in. 59.18 X 82.04 mm 6,380 St. OC07206 Trumpet 3.04 X 5.84 in. 77.22 X 148.34 mm 12,669 St. L OC07207 Bells 4.17 X 5.45 in. 105.92 X 138.43 mm 17,849 St. L OC07208 Sleigh 4.28 X 3.95 in. 108.71 X 100.33 mm 16,824 St. OC07209 Reindeer 4.56 X 6.77 in. 115.82 X 171.96 mm 17,698 St. L OC07210 Rocking Horse 5.73 X 4.76 in. 145.54 X 120.90 mm 18,772 St. L OC07211 Partridge in a Pear Tree 4.84 X 6.43 in. 122.94 X 163.32 mm 25,085 St. L OC07212 Pine Branch 3.13 X 5.20 in. 79.50 X 132.08 mm 3,046 St. L It is a violation of Copyright law to make and distribute copies of software or artwork. Software is licensed to the original purchaser for use at one location. ©2013 OESD, LLC. All rights reserved. Winter Treasures Set005 • Pack 61072 • 15 Designs Note: Some designs in this collection may have been created using unique special stitches and/or techniques. To preserve design integrity when rescaling or rotating designs in your software, always rescale or rotate designs using the handles directly on-screen. OC07213 Floral Spray Border 2.56 X 7.03 in. 65.02 X 178.56 mm 9,712 St. L OC07214 Pinecones 4.83 X 5.90 in. 122.68 X 149.86 mm 11,008 St. L OC07215 Jumbo Floral Spray 4.82 X 11.19 in. 122.43 X 284.23 mm 22,615 St. L It is a violation of Copyright law to make and distribute copies of software or artwork. Software is licensed to the original purchaser for use at one location. ©2013 OESD, LLC. All rights reserved. Winter Treasures Set005 • Pack 61072 • 15 Designs Listings below indicate color sample, stitching order and suggested thread color number in Isacord, YLI Fine Metallic, Yenmet or YLI Variegated threads. OC07201 Pointed Ornament n 1. Off White on Design...............................0670 n 2. Gold Details............................................7012 n 3. Off White on Design...............................0670 OC07206 Trumpet n 1. Off White on Design...............................0670 n 2. Gold Detail..............................................7012 n 3. Off White on Design...............................0670 OC07202 Globe Ornament n 1. Off White on Design...............................0670 n 2. Gold Details............................................7012 OC07207 Bells n 1. Gold Detail..............................................7012 n 2. Off White on Design...............................0670 n 3. Gold Detail..............................................7012 OC07203 Finial Ornament n 1. Gold Detail..............................................7012 n 2. Off White on Design...............................0670 n 3. Gold Detail..............................................7012 OC07204 Candy Cane n 1. Gold Detail..............................................7012 n 2. Off White on Design`1............................0670 n 3. Gold Detail..............................................7012 OC07205 Drum n 1. Off White on Design...............................0670 n 2. Gold Detail..............................................7012 n 3. Off White on Design...............................0670 OC07208 Sleigh n 1. Gold Detail..............................................7012 n 2. Off White on Design...............................0670 n 3. Gold Detail..............................................7012 OC07209 Reindeer n 1. Gold Detail..............................................7012 n 2. Off White on Design...............................0670 n 3. Gold Detail..............................................7012 n 4. Off White on Design...............................0670 OC07210 Rocking Horse n 1. Gold Detail..............................................7012 n 2. Off White on Design...............................0670 n 3. Gold Detail..............................................7012 OC07211 Partridge in a Pear Tree n 1. Gold Detail..............................................7012 n 2. Off White on Design...............................0670 n 3. Gold Detail..............................................7012 n 4. Off White Outline on Bottom Pear..........0670 OC07212 Pine Branch n 1. Off White on Design...............................0670 n 2. Gold Detail..............................................7012 OC07213 Floral Spray Border n 1. Off White on Design...............................0670 n 2. Gold Detail..............................................7012 OC07214 Pinecones n 1. Gold Detail..............................................7012 n 2. Off White on Design...............................0670 n 3. Gold Detail..............................................7012 OC07215 Jumbo Floral Spray n 1. Gold Detail..............................................7012 n 2. Off White on Design...............................0670 n 3. Gold Detail..............................................7012 NOTE: Thread color 7012 (a.k.a. S4) is Yenmet 14kt Gold. Try These Fun Alternate Colorways! OC07211 Partridge in a Pear Tree n 1. Gold Detail................................................ 7012 n 2. Off White on Design................................. 0670 n 3. Gold Detail................................................ 7012 n 4. Off White Outline on Bottom Pear............ 0670 OC07211 Partridge in a Pear Tree n 1. Green Detail............................................. 5912 n 2. Off White on Design................................. 0670 n 3. Green Detail............................................. 5912 n 4. Off White Outline on Bottom Pear............ 0670 OC07211 Partridge in a Pear Tree n 1. Red Detail................................................. 2333 n 2. Off White on Design................................. 0670 n 3. Red Detail................................................. 2333 n 4. Off White Outline on Bottom Pear............ 0670 It is a violation of Copyright law to make and distribute copies of software or artwork. Software is licensed to the original purchaser for use at one location. ©2013 OESD, LLC. All rights reserved.
