Download Customer Protocol_Firma_V3_070615.indd

1. Confirm that the patient does not have any implanted devices,
1. Confirm that the patient does
not have any
implanted
devices, pacemakers.
pacemakers.
Refer
to the Contraindication
list in theRefer
User
Manual.
In
any
doubt,
contact
a
physician.
to the Contraindication list in the User Manual. In any doubt, contact a physician.
2. Remove all metal objects2.orRemove
accessories
(piercing,
etc). (piercing, jewelry etc).
all metal
objectsjewelry
or accessories
3. Clean the treatment area
with water
soap inwith
order
to and
remove
3. thoroughly
Clean the treatment
areaand
thoroughly
water
soap in
order to remove lotion and makeup.
lotion and makeup.
4. Take photos of the patient.
4. Take photos of the patient.
5. For body treatments only:
5. For body treatments only:
 While
standing,
• While patient is standing, mark
thepatient
area toisbe
treated.mark the area to be treated.
 Divide the treatment area into 10x10 square cm. Mark the
• Divide the treatment area into 10x10 square cm. Mark the boundaries or
boundaries or corners with a permanent marker.
corners with a permanent
6. marker.
Position the patient comfortably on the treatment bed.
6. Position the patient comfortably on the treatment bed.
7. Clean the 3Deep™ treatment handpiece with 70% alcohol
7. Clean the Eclipse Firma treatment
handpiece
with 70%
byisadry
drybefore
followed
by a dry gauze.
Makealcohol
sure thefollowed
handpiece
starting
a
new
treatment.
gauze. Make sure the handpiece is dry before starting a new treatment.
Performing the Treatment
Performing the Treatment
1. Apply EndyMed gel in the first treatment square/area.
1. Apply gel provided with the
to the
first treatment
square/area.
2. Firma
Move the
treatment
handpiece
on the selected
2. Move the treatment handpiece
on the selected
square/area
square/area
in a circular
motion. in a circular motion.
While
constant
motion,
push thean
trigger
button to
3. While in constant motion,3.push
theintrigger
button
to activate
RF pulse.
activate
an
RF
pulse.
4. After completion of the pulse, measure the surface temperature using the laser
4. After completion of the pulse, measure the surface
thermometer.
temperature using the laser thermometer.
5. If the temperature is < 40ºC – increase power by 2W and perform an additional
5. If the temperature is < 40ºC – increase power by 2W and
pass.
perform an additional pass.
6. If the temperature is > 42ºC
decrease
poweris by
2W -and
perform
an by
additional
6. If-the
temperature
> 42ºC
decrease
power
2W and
perform
an
additional
passes.
passes.
7. aWhen
least 6 passes
a face(for
treatment)
or 8 passes
7. When at least 6 passes (for
faceattreatment)
or 8(for
passes
a body treatment)
(for a body treatment) at temperature > 40ºC have been
at temperature > 40ºC havecompleted
been completed
consecutively, move to the next
consecutively, move to the next treatment area
treatment area and repeat the
procedure.
and
repeat the procedure.
FOR SUCCESS
Quick Reference Guide
Pre – Treatment Preparation
Pre–Treatment Preparation
PRODUCT PROTOCOL
Skin Tightening (PURE)
Page 1 of 2
This document DOES NOT replace the PURE by EndyMed™ User Manual and Application Guide.
Setting Treatment Parameters
1. From the Main Menu, choose the desired application.
ND_DOC00089 US Rev A
2. Choose the appropriate handpiece according to the application.
3. Choose the target area for treatment (1).
4. Modify the power settings (optional) (2).
5. Click the “Start” button (3) to confirm settings and enable handpiece trigger.
The “Pause” button will start blinking.
6. The time counter (4) will indicate the time remaining to complete the pass.
7. The “Passes” counter (5) counts the passes performed. It can be reset by clicking
the button.
Need Help? The Eclipse Team is Here to Assist (800) 759-6876
Eclipse Aesthetics, LLC.
13988 Diplomat Drive, Suite 160
Dallas, Texas 75234
800-759-6876
www.EclipseAesthetics.com
1. Clean the treatment handpiece with 70% alcohol followed by dry gauze.
2. Make sure the handpiece is dry before starting a new treatment.
Accessories
Multiple easy-to-use handpieces for specific target zones are available. Each unit
comes standard with two handpieces. Selection available and uses can vary based
on model. Please contact your representation with any questions.
FIRMA
FIRMA
FIRMA
FIRMA
FIRMA
iFine
Fine
Standard
Large
Shape
It is suggested to provide Firma sessions as a bundle package. Many provide four
sessions on average, but that may vary based on a patient’s needs.
Estimated Patient Fees: Range $3,500 to $4,500 based on patient treatment plan.
Need Help? The Eclipse Team is Here to Assist. (800) 759-6876
FOR SUCCESS
Pricing
PRODUCT PROTOCOL
Post – Treatment
Eclipse Aesthetics, LLC.
13988 Diplomat Drive, Suite 160
Dallas, Texas 75234
800-759-6876
www.EclipseAesthetics.com