Download Untitled

Welcome
Thank you for purchasing the new Stereo Wireless Bluetooth Speakers SY-XS28BT. In order to fully
benefit from this product, please follow the instructions in this user manual very carefully. Store this user
manual in a safe place for future reference. We are sure your new Stereo Bluetooth Speakers will satisfy
your needs.
Buttons
A: Press and hold it to increase the volume ; Press it shortly to go to the previous track.
B: Press it shortly to play or pause the current music playing ; Press and hold it to enter into the bluetooth
pairing mode.
C: Bluetooth connectivity indicator
D: Press and hold it to decrease the volume; Press it shortly to go to the next track.
E: Mini USB charging port to charge the unit
F: On/off switch
Safety information
1.
2.
3.
4.
5.
6.
7.
Read and understand the safety information.
Due to the built-in battery, please switch off the unit when it is not in use.
Please use the correct charger for this unit in order to avoid any damage to the unit.
Keep away from any rain, moisture or any other areas where water may be present.
Keep away from high temperature areas.
Avoid dropping or damage to the unit. Do not place heavy objects on top of the unit.
Do not bring your speakers in contact with any sharp object as this may cause scratches and
damage.
8. Clean the units with a dry cloth only
9. Do not clean the unit while it is being charged. Always disconnect the charger before cleaning.
10. Do not use abrasive cleaners to clean the speaker
11. Do not block any ventilation openings
12. Under any circumstances, never try to repair the unit by yourself. This will void the warranty. For
any technical issue, please contact Sytech Service Center.
13. In order to maintain the battery life of the unit, please recharge the speaker at least once every
two months.
How to operate
When pairing for the first time, at first it is essential to pair the two speakers to each other. Once this step
has been completed, pair any of the two speakers to the bluetooth device.
1) Turn on both of the speakers at the same time. The bluetooth indicator will blink and you will hear a
sound. Press and hold the Play/Pause button on both the speakers. When you hear another sound It
means that the two speakers are paired automatically. The indicator will now turn steady.
Attention: when you pair the two speakers, please make sure the bluetooth function on other devices are
not switched on in order to avoid interference.
2) Press and hold the Play/Pause button on any of the two speakers and a sound will be heard which
indicates they are ready to pair. Turn on the bluetooth function on the device you wish to pair and then
search for the bluetooth SY-XS28BT in the list, click it to pair it. When you hear the sound again and the
the indicator light is steady, it means they are paired. The speaker which is paired with the music device
is the left channel and the other is right channel.
If you want to use them as two individual bluetooth speakers, Press and hold the Play/Pause button on
any one of the speakers and pair it with music devices whilst the other speaker is turned off.
Pairing after first use:
Turn on the speakers at the same time , and since they have already been paired previously they will
pair automatically once switched on.
Turn on the bluetooth function on the music device, find the name in the list and click it to connect the
music device to the SY-XS28.
How to charge:
When any of the speakers’ volume turns low, it means the the battery is running out and it needs to be
charged. Please make sure both the speakers are fully charged at the same time.
Insert the charging cable into the Mini USB port, and connect it to the USB port in the computer. The
power indicator will be red when it is charging. It will turn off when the speakers are fully charged.
Troubleshooting
1) When using for the first time, only one speaker is working.
Please turn off both the speakers and turn them on at the same time in order to establish a
successful connection between both of them. Follow the steps mentioned previously in this user
manual on how to pair the speakers. Once the connection has been established, please proceed to
pair it with the external music device.
2) When using after the first time, if the speakers did not connect automatically, please switch one of
them off and turn it on after 1 minute.
Another option would be to turn off both the speakers and turn them on at the same time.
3) The volume of the sound Is very low
Please charge the two speakers fully.
4) If a password is required upon pairing your music device to the speakers, please insert the code
“0000”
Specifications
Stereo wireless Bluetooth Speakers
Transmission distance: Speakers: 5 meters
Device: 10 meters
Integrated 800mah rechargeable Li-Polymer battery in each speaker
Charging time: 5-6 Hours (Each speaker)
Playing time: Approx. 7 hours (Each Speaker)
Bluetooth 2.0 + EDR wireless technology. Supports A2DP and AVRCP
Control the volume and tracks from any of the speakers
Power output: 2x3 W. RMS.
50mm. speaker driver, 4Ohm
Direct USB charging from USB
Declaration of Conformity
Manufacturer Name: Satyatrade S. L.
Address: Pol.Ind.La Raya. C/ Guadalquivir, 2.
Camarma de Esteruelas, 28816 Madrid
Tel: 902 430 967
Fax: 91 8864285
NIF: B83254763
Manufacturing country: China
Description: Stereo Wireless Bluetooth Speaker
Sytech® SY-XS28BT complies with the following directives:
EMC Standard: Directive 2004/108/CE
ROHS Standard: 2011/65/EC Restriction of Hazardous Substances
Signed: Ajeet Nebhwani Utamchandani
Sole Administrator