1
Download Pro-Ject Set “Micro-Hifi-System”
Transcript
INSTRUCTIONS FOR USE Pro-Ject Set “Micro-Hifi-System” Dear music lover, thank you for purchasing a Pro-Ject “Micro-Hifi-System”-Set. In order to achieve maximum performance and reliability you should study these instructions for use carefully. ! Warning of a hazard for the user, the units or possible misuse. Important notice. Safety instructions ! AC outlet voltages vary from country to country. Before connecting to the mains, make sure that the voltage in your area meets the voltage requirements printed on the power supply. The power cord/power supply is used to disconnect the unit from the mains. Make sure that the power cord/power supply is easily accessible at all times. Never handle the device, the power cord/power supply while your hands are wet or damp. Avoid letting liquids enter the device or the power supply. Never place any item containing liquid, such as a flower vase on or near the device. Never spill any liquid on the device or the power supply. Never place any naked flame sources, such as lighted candles on or near the device. The product shall not be used in damp or wet locations, next to a bathtub, sink, swimming pool or any other similar conditions. What’s in the box Receiver Box S including remote control handset, power supply and power cord Dock Box S Fi including remote control handset and power supply CD Box S including remote control handset and power supply Control it remote control handset 2 x Speaker Box 5 including wall mount brackets and instruction for use Design Box 4iP Acryl Speaker cable, length 2 x 3 meter 8 x banana plugs (4mm ) Interconnect cables, length 20 and 25cm Connectors - Receiver Box Pro-Ject Audio Systems, Vienna, Austria ! 2 Make all connections whilst the receiver is disconnected from the power supply. © Audio Trade GmbH · Pro-Ject Micro-Hifi-System-Set · Revision 2013.1.15 Connecting receiver, docking station and CD player Connect, using the supplied interconnect cables, the sockets IN1 on the receiver to the sockets OUT on the CD Box S. The sockets OUT of the Dock Box S Fi have to be connected to the sockets IN2 on the receiver. Take care to connect the left and right channels correctly. The right channel is usually marked red, ! the left channel black or white. Antenna input Connects any antenna cable with a co-axial DIN-plug / US-model F-plug. Connecting receiver and speakers The output terminals accept loudspeaker cables terminated with 4mm Banana plugs, spades connectors or naked wire. Connect the cable terminals on the receiver to the terminals on the speakers. The red speaker terminals carry the positive signal (+), the black speaker terminals the negative ! signal (–). Make sure the polarity of the connection is correct at each end of the cables. Only connect one loudspeaker with an impedance not less than 4 ohms per channel. Connectors - CD Box S Pro-Ject Audio Systems, Vienna, Austria ! Make all connections whilst the CD player is disconnected from the power supply. Connection to a external A/D-converter Connect the Co-axial out socket to a coaxial digital input on the D/A converter or AV processor. Doing so allows you to use the signal in its digital for further digital processing. Connectors - Dock Box S Fi 18V Pro-Ject Audio Systems, Vienna, Austria ! Make all connections whilst the Dock Box is disconnected from the power supply. Connecting to a computer, iPod® operating system Connect the USB-output of the Dock Box to a free USB-socket on your computer and turn it on/make sure it is powered on. When the Dock Box is connected to a computer, all functions of the Dock Box are blocked. © Audio Trade GmbH · Pro-Ject Micro-Hifi-System-Set · Revision 2013.1.15 3 Connection to a TV-set or a beamer Connect the S-VIDEO socket to a s-video input of your TV-set or beamer. Fitting and adjustment of the iPod® cradle Use the knurled screw supplied to fix the cradle to the Dock Box chassis. Do not fully tighten the screw yet. Now place your iPod® on the Dock Box contacts. Move the cradle so that it supports the iPod® and tighten the screw. Suitable for iPods® with 30-pole connector only. ! Use without the cradle breaks the 30-pole connector of the Dock Box and the socket of the iPod®. Before connecting the iPod®, any sort of cover has to be removed. Mains power connection Receiver Box S Connect the low voltage plug from the power supply to the Power 20V " socket before connecting the power supply to the mains. CD Box S Connect the low voltage plug from the power supply to the Power 9V " socket before connecting the power supply to the mains. Dock Box S Fi Connect the low voltage plug from the power supply to the Power 18V " socket before connecting the power supply to the mains. ! Never use any other power supply than the one supplied with the particular unit. To switch on and off, loading the battery - Dock Box S Fi The push button on the front panel turns the Dock Box on and off. The blue LED above the push button shows that the unit is switched on. When the Dock Box is connected to the mains supply and switched on, the iPod® will start recharging as soon as it is placed on the contacts. Recharging will continue even if the iPod® is on standby. Recharging is not possible, when the Dock Box is switched off. 4 © Audio Trade GmbH · Pro-Ject Micro-Hifi-System-Set · Revision 2013.1.15 Remote control - Dock Box S Fi Blanked out buttons do not carry a function ! ON/OFF MENU ENTER 7 REPEAT 8 9 SHUF To switch on from standby or to standby 0 0 7 8 ON/OFF turns the iPod® into standby. To switch on from standby press any key (except ON/OFF). 9 Start / Pause 0 8 starts and pauses playback Stepping between tracks, reverse and forward scanning 9 7 skips to the previous track. 7 restarts the current track in playback mode Press and hold the 7 skips to the next track button for reverse scanning, or the button 9 to start forward scanning. Repeat play 7 REPEAT starts repeat play for the current track. Pressing the button again starts repeat play for all tracks. To deactivate repeat play press REPEAT once more. Shuffle play 9 SHUF activates and deactivates shuffle play Navigating the menu MENU shows the menu. Returns to the previous step in the menu and ENTER move the curser up and down, to highlight the requested option. selects or deselects the highlighted option. Shows the next step in the menu. © Audio Trade GmbH · Pro-Ject Micro-Hifi-System-Set · Revision 2013.1.15 5 Remote control - Receiver Box S To switch on from standby or to standby INPUT ON/OFF CH+ TUNE 0 ON/OFF short press turns the unit on, long press takes it back into standby. Powered on, a short press activates and deactivates mute TUNE VOL- OK VOL+ M1 CH- M2 Volume _ VOL 0 M4 M5 M6 M7 M8 0 VOL + adjust the sound volume Selecting an input 0 INPUT M3 and selects the inputs and tuner mode in turns Selecting the tuning mode 0 OK Pressing (min. 3 seconds) selects the tuning modes manual program search (MANUAL), automatic program search (AUTO) and program selection from memory (MEMORY) in turns. Manual program search - the display shows MANUAL TUNE decreases, TUNE increases the reception frequency in 50kHz steps. Automatic program search - the display shows AUTO 0 CH- starts the automatic frequency scan downwards, 0 CH+ starts the scan upwards. Program selection from memory - the display shows MEMORY 0 - 0 and M1 CH- 0 M8 activate the memory function. Pressing 0 CH+ 0 M1 - 0 M8 access the presets 1 - 8 directly. select -memory function has to be activated- the memory positions 9 - 99. Saving a program in the memory list Tune to the frequency to be stored. Press 0 CH+ 0 OK twice in rapid succession. The display will show STORE. will select the next memory position up the list, 0 CH- selects the next memory position down the list. The memory positions 1 - 8 can be selected directly by pressing Press 6 0 M1 - 0 M8 . 0 OK once again to store the program at that position. The display shows STORED. Saving a program to a particular memory position overwrites any program already stored at that position. The memory retains its contents through a power off/on cycle. © Audio Trade GmbH · Pro-Ject Micro-Hifi-System-Set · Revision 2013.1.15 Auto store function 0 M4 Long press 0 M1 starts, confirms the auto store function. 0 M1 clears the complete memory while 0 M2 storing. keeps stations with good signal strength in the memory and overwrites stations with insufficient signal level while storing. Front panel controls - Receiver Box S Receiver Box S To switch on from standby or to standby - Receiver Box S The push button on the left hand side will toggle the receiver between its fully operational status and standby. The blue LED above the stand-by push button shows that the unit is switched on. In standby the display will show STANDBY. While switching off, the unit saves the settings for input, volume and mute, to be set automatically after next power on. Input selector After the unit is powered on, the push button selects the inputs IN1, IN2 and the tuner mode in turn. The display will show the volume level and the selected input: TUNER, IN1 or IN2. The optional input expander Pro-Ject Switch Box S provides three more inputs. For further details please see the user guide of the Pro-Ject Switch Box S. Volume and adjust the volume (95 steps) to the desired level. The display will show the volume level set. -95dB indicates min., 00dB max.. Mute While the unit is powered on, 0 ON/OFF activates and deactivates mute . Dimming the display 0_ VOL 0 VOL + TUNE TUNE After pressing or on the remote control, or set the brightness of the display. Available settings: DIM MIN, DIM 1 - DIM 4 and DIM MAX. The display will show the selected setting. © Audio Trade GmbH · Pro-Ject Micro-Hifi-System-Set · Revision 2013.1.15 7 Setting the colour of the des display 0 decreases 0 decreases M3 M4 0 0 increases red 0 increases green M6 M7 0 M8 M5 decreases increases blue The changes will be shown in the first line of the display. After leaving the set-op menu, the changes will become valid for the complete display. 0 M1 loads the factory settings for brightness and colour. To leave the set-up menu press 0 OK . Display - tuner mode A B C 87.90 MANUAL D E A Signal strength meter B Stereo reception C Fine tuning meter D Tuning mode. The rotary selector toggles between the tuning modes E Tuned frequency F Mono reception Manual program search Press (approx. 3 seconds) repeatedly until the display shows MANUAL. increases the reception frequency in 50kHz steps. decreases the reception frequency in 50kHz steps. The tuner is correctly adjusted for a stereo broadcast when A the largest number of bars are shown (signal strength meter) and B two loudspeaker symbols are shown (F one loudspeaker symbol shows mono reception) C the vertical bar is centred in the fine tuning display Automatic program search Press (approx. 3 seconds) repeatedly until the display shows AUTO. starts the automatic frequency scan upwards, will start it downwards. The maximum signal strength will be adjusted automatically for each program found. Program selection from memory Press (approx. 3 seconds) repeatedly until the display shows MEMORY. will select the program with the next memory position up the list, selects the program with the next memory position down the list. The program’s memory position is shown to the right of MEMORY in the display. Saving a program in the memory list The memory of the Pro-Ject Receiver Box S can store up to 99 programs. Tune to the frequency of the program to be stored. Press twice in rapid succession. The display will show STORE. selects the next memory position up the list, selects the next memory position down the list. Press once on to store the program at that position. The display shows STORED. To be able to select a tuning modes (manual program search, automatic program search or program selection from memory), a antenna has to be connected. Saving a program to a particular memory position overwrites any program already stored at that position. The memory retains its contents through a power off/on cycle. 8 © Audio Trade GmbH · Pro-Ject Micro-Hifi-System-Set · Revision 2013.1.15 Remote control - CD Box S To switch on from standby or to standby +10 ON/OFF STOP 1 ON/OFF turns the unit on or back into standby Volume control 0_ VOL- 0 VOL+ VOL 1 2 3 Stop 5 4 STOP 6 or 0 VOL + adjust the sound volume of your Pro-Ject Audio amplifier stops playback Play / Pause 7 9 8 8 starts and pauses playback Selecting tracks 1 - 9 and +10 accesses a specific track directly and start playback. For example, to play track 19, press 9 +10 , 1 and 9 . To play track 29, press +10 , 2 and . Stepping between tracks, scanning through the disc Press 7 9 or . The display shows the number of the tracks as you step. Press and hold the button 7 for fast reverse scanning. 9 activates fast forward scanning. Repeat and random play 0 Pressing the button repeatedly selects the repeat modes in turns. The display shows: repeat play for the current track repeat play for all tracks Pressing 0 again takes the CD player back to standard playback. © Audio Trade GmbH · Pro-Ject Micro-Hifi-System-Set · Revision 2013.1.15 9 Front panel controls - CD Box S CD Box S To switch on from standby or to standby - CD Box S A short press of the push button on the left hand side switches the player to its fully operational status. To return to standby, press the button for more than four seconds. The display shows STANDBY when the unit is in standby. To switch to standby, playback must be stopped. Inserting and ejecting a disc Switch the unit on from standby. Insert the disc into the slot, with the label side facing upwards. The slot-loading mechanism will load the disc automatically. The display shows the total number of tracks on the disc and the total duration of the disc. A short press of the button stops playback. Pressing again, ejects the disc. Play starts playback of the first track. The display shows the current track number, the elapsed time of the current track and the play icon. Pause pauses playback. The display shows the current track number, the elapsed time of the current track and the pause icon. To resume playback press again. Stop A short press of the button stops playback. The display shows the total number of tracks on the disc, the total duration of the disc and the stop icon. Stepping between tracks Press the buttons (previous track) or (next track). The display shows the number of the tracks as you step, the elapsed time of the current track and the step icon. Scanning through the disc Press and hold the button (fast backward) or (fast forward) to scan through the disc. The display shows the current track number, the elapsed time of the current track and the scan icon. Releasing or will take you back to playback. 1 © Audio Trade GmbH · Pro-Ject Micro-Hifi-System-Set · Revision 2013.1.15 Control it The six push buttons correspond to each unit. Press the appropriate button to select the unit you want to control, then press the required function buttons. Blanked out buttons do not carry a function, for the unit selected. CD Receiver Stream Amp Dock Media CD CD-player Receiver Receiver Box and Tuner Box Dock Docking Station Media Media Box Stream Stream Box Amp Pre amplifier, integrated amplifier, Juke Box and Juke Box Esprit © Audio Trade GmbH · Pro-Ject Micro-Hifi-System-Set · Revision 2013.1.15 1 Pre amplifier, integrated amplifier, Juke Box and Juke Box Esprit press Amp turns the unit on or back into standby. - + VOL and adjust the sound volume of the pre amplifier, integrated amplifier, receiver or Juke Box and Juke Box Esprit. activates and deactivates mute *. CH + - VOL + and - select the inputs in turns. + CH - Amp * Pre Box SE, Pre Box DS and Stereo Box DS only 1 © Audio Trade GmbH · Pro-Ject Micro-Hifi-System-Set · Revision 2013.1.15 Receiver and Tuner press 2/M2 1/M1 4/M4 5/M5 7/M7 8/M8 3/M3 6/M6 Receiver short press turns the unit on, long press takes it back into standby. Powered on, a short press activates and deactivates mute *. - + VOL and adjust the sound volume of the receiver, pre amplifier, integrated amplifier, or Juke Box and Juke Box Esprit. INPUT selects the inputs and tuner mode in turns *. OK Pressing (min. 3 seconds) selects the tuning modes manual program search, automatic program search and Program selection from memory. UT INP Automatic program search: CH frequency scan downwards, + OK - starts the automatic starts the scan upwards. decreases, Manual program search: the reception frequency in 50kHz steps. + VOL - + CH - 1/M1 increases 8/M8 Program selection from memory: activate the memory function. Access the presets 1 - 8 directly. - + and select -memory function has to be CH activated- the memory positions 9 - 99. Saving a program in the memory list: Tune to the frequency to be stored. Press succession. Receiver CH - + OK twice in rapid will select the next memory position up the list, selects the next memory position down the list. The memory positions 1 - 8 can be selected directly by * Receiver only pressing 1/M1 OK Press position. - 8/M8 . once again to store the program at that © Audio Trade GmbH · Pro-Ject Micro-Hifi-System-Set · Revision 2013.1.15 1 CD-player press CD turns the unit on or back into standby. 2/M2 1/M1 starts and pauses playback. 3/M3 stops playback. 5/M5 4/M4 7/M7 8/M8 6/M6 9/M9 1/M1 9/M9 playback. accesses a specific track directly and start Higher track numbers - for example, to play track 19, 0 +5/M10 press +5/M10 , 1/M1 and 9/M9 . - + VOL and adjust the sound volume of the pre amplifier, integrated amplifier, receiver or Juke Box and Juke Box Esprit. To step between tracks press or . Press and hold the button for fast reverse scanning. activates fast forward scanning. + VOL - 0 Pressing the button repeatedly selects the repeat modes in turns. Selects random mode *. 0 again takes the CD player back to Pressing standard playback. CD * CD Box SE and CD Box DS only 1 © Audio Trade GmbH · Pro-Ject Micro-Hifi-System-Set · Revision 2013.1.15 Docking station press Dock turns the iPod®/iPhone® into standby. To switch on from standby press any key (except ON/OFF). Dock Box Fi and Dock Box Vi only. Turns the unit on or back into standby. activates and deactivates mute *. + - VOL and docking station *. adjust the sound volume of the starts and pauses playback. REP EAT E FL UF SH Skips to the previous track skips to the next track. . restarts the current track in playback mode. button for reverse scanning, or Press and hold the the button to start forward scanning. MENU ENTER starts repeat play for the current track. Pressing the button again starts repeat play for all tracks. REPEAT + VOL - To deactivate repeat play press SHUFFLE REPEAT once more. activates and deactivates shuffle play. MENU shows the menu. Returns to the previous step in the menu. ▲ and ▼ move the curser up and down, to highlight the requested option. Dock ENTER selects or deselects the highlighted option. Shows the next step in the menu. * Docking stations with volume control only. No support of volume control with “all digital” units, such as iPhone 5® © Audio Trade GmbH · Pro-Ject Micro-Hifi-System-Set · Revision 2013.1.15 1 Media Box press Media turns the unit on or back into standby. USBISD selects between card reader and USB. starts and pauses playback. Restarts playback from the same position after stopping. skips to the next track. restarts the current track in playback mode. -5 +5/M10 button for reverse scanning, Press and hold the or the button to start forward scanning. REP EAT Pressing the button repeatedly selects the repeat modes in turns. US BI SD REPEAT ▲ and ▼ move the curser up and down, to highlight the requested option. ▲ displays the play list in playback mode. ENTER FOL- FOL+ ENTER displays the main menu. Selects the highlighted option, or modes in menus and submenus. Press FOL- -5 or FOL+ to step between folders. +5/M10 or to step between next/previous Press 5 entries of a folder. Media 1 © Audio Trade GmbH · Pro-Ject Micro-Hifi-System-Set · Revision 2013.1.15 Stream Box press Stream turns the unit on or back into standby. @ ABC DEF 1/M1 2/M2 3/M3 GHI JKL MNO 4/M4 5/M5 6/M6 PQRS TUV WXY 7/M7 8/M8 9/M9 activates and deactivates mute. starts and pauses playback. stops playback. skips to the next track, picture or internet radio station. skips to the previous track, picture or internet radio station. 0 REP ▲,▼,◄ and ► navigate the cursor. EAT E FL UF SH OK OK Calls up a submenu. Highlights and confirms a highlighted menu item. Back Play view jumps one step back in a menu. Root Play view calls up the root menu. SHUFFLE FAV add FAV del FOL- FOL+ activates and deactivates shuffle play. Pressing the button repeatedly selects the repeat modes in turns. REPEAT FOL- FAV add adds a track or an internet radio station to the favourite list. Play view Back Root FOL+ FAV del removes a track or a internet radio station from the favourite list. Stream 1/M1 0 keys for alphanumeric search and to enter the WLAN code. © Audio Trade GmbH · Pro-Ject Micro-Hifi-System-Set · Revision 2013.1.15 1 Replacing batteries (Receiver, CD Box S and Dock Box S Fi) Proceed as follows: Unlock and slide open the battery case cover Replace the battery. Make sure the battery is the right way round ! Close the battery case cover Battery type: 1 x CR2032 / 3V or 1 x CR2025 / 3V Replacing batteries (Control it) Proceed as follows: Unlock and remove the battery case cover Replace the batteries. Make sure the batteries are the right way round ! Refit the battery case cover Do not dispose the batteries as ordinary domestic refuse. Please dispose your exhausted batteries at the appropriate collection sites - usually located at supermarkets and drugstores. Technical specifications Pro-Ject Receiver Box S Power output: Tuning range FM-band: Programmable presets: THD tuner: Stereo separation: Sensitivity: Frequency response: Channel separation: Noise floor: THD amplifier: Gain: Line-level inputs: Input impedance: Antenna input: Outboard power supply: Power consumption: Replacement battery remote control: Dimensions W x H x D (D with sockets): Weight: 2 x 25W/30W at 8 ohms/4 ohms (both channels driven) 87,5 - 108MHz (50kHz steps) 99 0,05% / ∆f 75kHz and f mod 1kHz 30dB / ∆f 75kHz and f mod 1kHz 7dB/V mono, 17dB/V stereo /75 ohms 20Hz - 20kHz (±0,2dB) >40dB at 20kHz >-100dB (A weighted) <0,05% at 10W 22dB 1 pair RCA/phono sockets, 3-pole 3,5mm co-axial jack 20kohms 1 x co-axial DIN-socket (75 ohms) / US-model F-socket 20V/3A DC (peak 7A DC), suitable for your country's mains supply 3A DC, <1W in standby 1 x CR2032 / 3V or 1 x CR2025 / 3V 103 x 36 x 104 (122)mm 670g without power supply Technical specifications Pro-Ject Dock Box S Fi Frequency response: Line-level output: Output impedance: Output voltage: USB-output: USB-signal: Operating systems: Video output: Outboard power supply: Power consumption: Replacement battery remote control: Dimensions W x H x D (D with sockets): Weight: 1 20Hz - 20kHz 1 pair RCA/phono sockets 15 ohms 1Vrms 5-pole mini-B jack digital serial data protocol USB 1.1 Windows XP®, Windows VISTA®, Windows 7®, Windows 8®, Mac OS S-video socket 18V/500mA DC, suitable for your country's mains supply 300mA DC max.. Power consumption is not constant. It depends on the charging needs of the battery. <1W in standby 1 x CR2032 / 3V or 1 x CR2025 / 3V 103 x 36 x 104 (109)mm - height plus height of iPod or iPhone 585g without power supply © Audio Trade GmbH · Pro-Ject Micro-Hifi-System-Set · Revision 2013.1.15 Technical specifications Pro-Ject CD Box S Supports: Frequency response: Noise floor: THD: Line-level output: Output voltage: Digital output: D/A converter: CD, CD-R, CD-RW and Hybrid-SACD 20Hz - 20kHz /-0,3dB 96dB/1V 0,01% 1 pair RCA /phono sockets 1Vrms 1 x co-axial (S/PDIF) Texas Instruments TLV320DAC23 24Bit/96kHz, 8-times oversampling Outboard power supply: 9V/2.000mA DC; suitable for your country's mains supply Power consumption: 300 - 1.500mA DC, <1W in standby Replacement battery remote control: 1 x CR2032 / 3V or 1 x CR2025 / 3V Dimensions W x H x D (D with sockets): 206 x 36 x 150 (156)mm Weight: 1.260g without power supply Technical specifications Pro-Ject Speaker Box 5 Recommended amplifier power: Impedance: Sensitivity (1W/1m): Dimensions W x H x D / weight: 10 - 150 watts 8ohms 86dB 160 x 255 x 210mm / 4,2kg Technical specifications Pro-Ject Control it Batteries: Dimensions W x H x D: Weight: 2 x AA / 1,5V 47 x 30 x 210mm 105g Service Should you encounter a problem which you are not able to alleviate or identify, please contact your dealer for further advice. Only when the problem cannot be resolved there should the unit be sent to the responsible distributor in your country. Warranty The manufacturer accepts no responsibility for damage caused by not adhering to these instructions for use and/or by transportation without the original packaging. Modification or change to any part of the product by unauthorized persons release the manufacturer from any liability over and above the lawful rights of the customer. Copyright, trademarks PRO-JECT is a Registered Trademark of H. Lichtenegger. The information was correct at the time of going to press. The manufacturer reserves the right to make This guide was produced by: Audio Trade GmbH changes to the technical specification without prior Copyright © 2012. All rights reserved. notice as deemed necessary to uphold the ongoing process of technical development. Windows XP®, Windows Vista®, Windows 7®, Windows 8® are trademarks of the Microsoft group of companies. iPod®, Mac® and Mac OS® are trademarks of Apple Inc., registered in the U.S. and other countries. © Audio Trade GmbH · Pro-Ject Micro-Hifi-System-Set · Revision 2013.1.15 1
