Transcript
3D LASER Party Light User Manual SKU#:02353779 Unboxing Check Thank you for using our products, For the sake of safety and better operation of this projector, please read this manual carefully before using and operating it, lest incur any personal injury or damage to the projector. Package List: 1.Projector 1PC Notice: 2. AC power supply 1PC 68-86 F K instructions. avoid water, moisture,and shaking. malfunctions. could be a hazard to one’s health. 7. You had better use the original package during the transportation. 8. Keep the power/adaptor disconnected when the unit is not on. Warnings: 1. The grade of the laser for it is Class III A, and will be dangerous if exposure to the eyes directly. 2. The working Voltage is 100-240V/50-60Hz, once exceeded this range its lifetime will be shorten. Statement: instructions. accidents caused by misuse. Specification: 1. Power AC power supply input AC100-240V/50~60Hz, Output +15V 1000mA/-15V 500mA 2. Laser generator-Wavelength:532nm(Green), 660nm(Red), 405nm(Purple) 3. Controls Mode: Sound Active,Auto & Pause Mode 4. Dimension: 194.5X141X115mm 5. Net Weight :1.06 kg 6. Gross Weight: 1.28 kg/pc Function: Project continual cartoon,graphics, and lines,can adjust the pattern size.Red,green and purple laser composite multicolor.In sound actived mode,patterns moved according to music cadence. Panel: 2 1 1. MIC 3. Sound Active & Pause & Auto Mode 5. Focus:can adjust pattern size 6 3 4 5 123 1 2 1.Music 2.Pause 3.Auto ON OFF Focus 2. Laser Aperture 4. Switch 1:ON 2:OFF 6. Power Jack